• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.05a
• /
• pp.160-162
• /
• 1995

The research and development for the solid oxide fuel cells have been promoted rapidly and extensively In recent years. because of their high efficiency and future potential. The purpose of this research Is to Investigate the performance evaluation and unit cell fabrication for SOFC.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.1447-1448
• /
• 2004

As the plants are classified as a bulk facility by the Agency's safeguards criteria, the Material Balance Evaluation is a good tool to timely detect diversion that will be accomplished through the creation of defects as small as bias defects. Through all evaluations made by the Agency, it Is strongly recommended to report SRD based on both weight and enrichment, maintain the reliable MUF declaration and improve the gamma spectrometry measurement procedure. These recommendations have been now applied and are going on.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.383-391
• /
• 1997

The prediction of effective properties of heterogeneous material like concrete is of primary importance in design or analysis. This paper os about micromechanice-based evaluation of elastic moduli of concretes considering composite material behavior. In this study, micromechanixe-based schemes for the effective elastic modui of the lightweight foamed concrete and the normal concrete are proposed based on averaging techniques using a single-layered inclusion model and a multi-phase and multi-layered inclusion model. respectively, For the verification's sake, elastic moduli evaluated in this study are compared with experimental data and results by existing formula.

• Korean Journal of Digital Imaging in Medicine
• /
• v.10 no.2
• /
• pp.39-49
• /
• 2008

Extravasation of contrast material is a not infrequent complication of enhanced imaging studies and large volume extravasation may result in severe damage. Subcutaneous extravasation of the radiographic contrast medium is one of the complications of the contrast medium-enhanced procedures. Automated power injectors enable the contrast material to be delivered at a uniform high-flow-rate and as a nonfragmented bolus, and this is essential for many contrast material enhanced CT(computed tomography) applications. The major risk associated with the use of automated power injectors is the well known complication of contrast material extravasation at the injection site. Automated injection of CT contrast material can produce the compartment syndrome. Selection of the nonionic contrast material after careful evaluation of the intravenous administration site and monitoring of the patient during the use of a mechanical power injector may help minimize or prevent extravasation injuries. Early identification is important and conservative management is effective in most cases. Prevention of these injuries with the education of radiological technologist remains the ultimate aim.

• Journal of the Korea Institute of Building Construction
• /
• v.7 no.4
• /
• pp.125-132
• /
• 2007

The use of Self-Leveling material is increasing recently. This paper assesses the quality of surface layer of concrete floor when Self-Leveling material is defective. The paper shows how to predict the defect of SL material before construction begins. The relationship between the quality of surface layer of concrete floor and the defect of SL material was determined and the quality of surface layer of concrete floor was then estimated. The relations between the quality of surface layer and the defect of SL material were determine considering surface strength, moisture, and consistency of surface layer. Absorbing amount was used as the indicator of consistency and the absorbing amount of test material was measured. Then the relations between the test material and surface strength were determined. Generally concrete floor with greater consistency has greater surface strength, however in this study, we hound that high impact concrete floor could have lower surface strength as the consistency gets bigger. The relations between the level of defect occurred in SL material and the quality of surface layer were examined and we clarified that the surface layer with lower consistency gets higher possibility to occur exfoliation in early stage, one or two weeks after constructing SL material. When the consistency is sufficient, the occurring situation of defect depends upon the moisture of surface layer. Little amount of moisture gets higher possibility not to occur the defect. As the amount increases, fissure generates and early exfoliation may occur. In addition, the level of fissure is highly related with the surface strength.

• Fashion & Textile Research Journal
• /
• v.10 no.2
• /
• pp.228-235
• /
• 2008

The purpose of this study is to examine the functionality with material-improved working uniform(protocol, P) and current working uniform(control, C). Movement functionality evaluation of material-improved working uniform was carried out through sensory evaluation of working uniform. And Oxygen uptake was explored to different working uniform(P, C) in relation to a physiological functionality measurement. The results have been shown as follows: It was found that the workers feel uncomfortable with the parts of the wrist, the back width, the shoulder seam and the side in the current working uniform when they move their arms up and down, but the inconvenience has been reduced in the material-improved working uniform. And It was found that the workers feel uncomfortable with the parts of the back width, the wrist and the side seam of the jacket, and the waist, the hips and the thigh of the trousers in the current working uniform when they move their waist, but the inconvenience has been reduced in the material-improved working uniform. In the current working uniform, it was also found that they feel uncomfortable with the parts of the horse riding position in which they stand straight in their slightly bended knees, with the parts of the hips, the side seam, the thigh and the knees when they crouch down, and with the parts of the hips and the thigh when they put one of their legs onto a higher place. However, the inconvenience was reduced in the material-improved working uniform. Oxygen uptake, which was measured to assess physiological dressing functionality, was found to be higher when people work in an uncomfortable uniform than when they work in a uniform of better functionality by an increase in metabolic rate, which can be a cause of workers' inefficiency of fatigue.

• The Korean Journal of Pesticide Science
• /
• v.20 no.4
• /
• pp.326-340
• /
• 2016

GHS was compared with that of current RDA directives in skin and eye irritation for plant protection products (PPPs). According to the result of evaluation and classification of skin and eye irritation by RDA directives and GHS for 59 PPPs, 25.5% of PPPs were changed the classification of skin irritation from slightly and moderately by RDA directives to Not Classified by GHS, and 45.8% of PPPs were changed the classification of eye irritation from slightly by RDA directives to Not Classified by GHS. 6.8% of PPPs in skin irritation and 5.1% in eye irritation were classified more highly as category 1 by GHS because of irreversible effect. According to the result of comparison with GHS classification by data of irritation study for PPPs and by GHS classification and concentration of active substances, 25.5% was changed more lowly and 3.4% more highly in skin irritation, and 25.4% was changed more lowly and 11.9% more highly in eye irritation. It is needed to draw a plan to supplement for other results between GHS and RDA directives.

• Women's Health Nursing
• /
• v.24 no.1
• /
• pp.1-13
• /
• 2018

Purpose: To develop educational material about nutrition during antepartum period for women pregnant with twins by using smartphone applications. Methods: A series of steps according to ADDIE model, including Analysis, Design, Development, Implementation, and Evaluation were used to develop smartphone application of antepartum nutrition care for women pregnant with twins. Results: Based on experts' evaluation, the average score was $4.6{\pm}0.39$ in total. Content score was $4.7{\pm}0.40$. Interface design score was $4.5{\pm}0.55$. Content score was higher than interface design score. User evaluation was conducted in the form of interview. Results of interviews revealed that users generally responded positively to the accuracy, understanding, and objectivity for content items of the smartphone app. As for the evaluation of consistency for the evaluation item of interface design, users answered "ordinary" or "generally yes". For design suitability and accuracy of vocabulary, they answered 'generally suitable'. Conclusion: The smartphone app developed through this study is expected to aid antepartum care for women pregnant with twins. It will also contribute to health promotion of both pregnant women and twin fetus.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.5
• /
• pp.355-363
• /
• 2021

Heat resistance performance evaluation and thermal analysis were performed to confirm the applicability of the lyocell-based carbon/phenolic composite material for heat-resistant parts for aerospace. Heat resistance performance evaluation of carbon/phenolic was conducted by Thermal Protection Evaluation Motor (TPEM). In this paper, boundary layer integration code considering the boundary layer analysis of combustion gas and MSC-Marc 2018 considering ablation and thermal pyrolysis were used for the thermal analysis. The ablation and thermal insulation performance were analyzed by the pressure curve of test motor and the cut carbon/phenolic specimens. The thermal response of the lyocell-based carbon/phenolic material was similar to that of the rayon-based carbon/phenolic material. Based on the results through the combustion test, the applicability of heat-resistant parts for aerospace to which domestic lyocell-based carbon fibers were applied was confirmed.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.535-541
• /
• 2020

A conventional elastic material replacement and performance evaluation are very complicated and time-consuming, and it is difficult to know when to replace the elastic material in advance. By comparing with the product limit and the functional limit, the necessity of elastic material replacement and the improvement of track support stiffness according to replacement can be immediately demonstrated based on experimental data. Using an evaluation system of track support stiffness, the performance evaluation data for elastic materials obtained through field tests using software for track support stiffness is integrated and managed on the administrator's computer. Therefore, the replacement plan is established and maintenance history is managed by identifying the replacement time and location of elastic materials. It is possible to evaluate the performance and condition of the elastic material at the various points during the working time of the track inspection and the track performance (track support stiffness) and durability of the elastic material (aging level, spring stiffness variation rate, etc.) at the operation condition. The elastic material could be replaced timely, and the deterioration of the elastic material can be continuously monitored.