Background: It is well known that preoperative administration of combined antiplatelet agents can have an impact on the postoperative bleeding, the requirement for transfusion and the need for reexploration during on-pump coronary artery bypass surgery. Yet its effects have not been well evaluated in the case of off-pump coronary artery bypass surgery. Material and Method: We performed a retrospective study of nineteen patients who underwent OPCAB from March 2003 to December 2004. All the patients had taken antiplatelet agents until 12 hours before operation. The patients were divided into bo groups as an aspirin group and a combined (aspirin+clopidogrel) group. The perioperative platelet count, the hemoglobin level, the hematocrit, the prothrombin time and the aPTT were compared between both groups. The amount of postoperative bleeding, the transfusion requirement and the need for re-exploration to control bleeding were also compared between both groups. Result: There was no difference of operation time and the intraoperative ACT between the aspirin group and the combined group. The amount of blood loss through the chest tube for 24 hours was not different between the aspirin group $(697{\pm}271mL)$ and the combined group $(944{\pm}432mL)$. The number of patients who received blood transfusion was also not different between both groups. There was no patient who required reexploration for bleeding control in both groups. The perioperative hemoglobin level and hematocrit were also not different between both groups, but the postoperative hemoglobin level and hematocrit were decreased significantly in the group. Conclusion: The Preoperative combined antiplatelet (aspirin+clopidogrel) therapy group was not different from the aspirin group for the amount of postoperative bleeding, the amount of blood transfusion and the need for reexploration during off-pump coronary artery bypass grafting. This subject needs further evaluation because of small population in our study.
This experiment was conducted to select suitable cultivars and evaluate growth characteristics to get basic information for sprouting peanut. On sprouting peanut, it showed a rapid increase in trans-resveratrol content that has effects on anti-cancer, anti-inflammatory, blood-sugar-lowering and other beneficial cardiovascular in mouse. For this experiment, characteristics of peanut sprouts were tested in 37 cultivars grown for 7 days at $26^{\circ}C$ temperature. There were a lots of variations in the growth characteristics among cultivars as followers : The range of 100 grain weight was 56 to 142 g, hypocotyl length was 4.3 cm to 5.8 cm, diameter of hypocotyl was 5.0 to 8.0 mm, epicotyl length was 0.8 cm to 4.6 cm, seedling ratio per seed number was 84% to 100%, weight per seedling was 4.9 g to 8.4 g, the rate of hypocotyl cleavage was 0% to 46%, the content of trans-resveratrol was $22.5\;{\mu}g/g$ to $88.2\;{\mu}g/g$ and sprout yield was 360% to 820%. The selection points considered were high sprout yield, high seedling rate, high resveratrol content, low brownish cotyledon, no hypocotyl cleavage, and fat hypocotyl etc. The best cultivar selected was 'Jokwang' that showed 7.8 mm diameter, clean cotyledon color, 100% seedling rate, 0% hypocotyl cleavage, $63.3\;{\mu}g/g$ resveratrol, and 820% sprouting yield. This cultivar was expected to be of use as a new food and nutraceutical material. Relationship between growth characteristics showed that root length had significant positive correlations with epicotyl length, resveratrol content and sprouting yield but negative correlations with hypocotyl diameter and cleavage. Hundred grain weight showed negative correlations with resveratrol content, seedling rate and sprouting yield but positively correlated with curved hypocotyl rate and hypocotyl cleavage positively. This result showed small grain seed will be more appropriate for sprouting peanut.
Journal of Korean Society for Atmospheric Environment
/
v.32
no.5
/
pp.501-512
/
2016
The study evaluated methods to measure condensable fine particles in flue gases and measured particulate matter by fuel and material to get precise concentrations and quantities. As a result of the method evaluation, it is required to improve test methods for measuring Condensable Particulate Matter (CPM) emitted after the conventional Filterable Particulate Matter (FPM) measurement process. Relative Standard Deviation (RSD) based on the evaluated analysis process showed that RSD percentages of FPM and CPM were around 27.0~139.5%. As errors in the process of CPM measurement and analysis can be caused while separating and dehydrating organic and inorganic materials from condensed liquid samples, transporting samples, and titrating ammonium hydroxide in the sample, it is required to comply with the exact test procedures. As for characteristics of FPM and CPM concentrations, CPM had about 1.6~63 times higher concentrations than FPM, and CPM caused huge increase in PM mass concentrations. Also, emission concentrations and quantities varied according to the characteristics of each fuel, the size of emitting facilities, operational conditions of emitters, etc. PM in the flue gases mostly consisted of CPM (61~99%), and the result of organic/inorganic component analysis revealed that organic dusts accounted for 30~88%. High-efficiency prevention facilities also had high concentrations of CPM due to large amounts of $NO_x$, and the more fuels, the more inorganic dusts. As a result of comparison between emission coefficients by fuel and the EPA AP-42, FPM had lower result values compared to that in the US materials, and CPM had higher values than FPM. For the emission coefficients of the total PM (FPM+CPM) by industry, that of thermal power stations (bituminous coal) was 71.64 g/ton, and cement manufacturing facility (blended fuels) 18.90 g/ton. In order to estimate emission quantities and coefficients proper to the circumstances of air pollutant-emitting facilities in Korea, measurement data need to be calculated in stages by facility condition according to the CPM measurement method in the study. About 80% of PM in flue gases are CPM, and a half of which are organic dusts that are mostly unknown yet. For effective management and control of PM in flue gases, it is necessary to identify the current conditions through quantitative and qualitative analysis of harmful organic substances, and have more interest in and conduct studies on unknown materials' measurements and behaviors.
Kim, Eun-Jung;Park, Bae-Kyung;Kim, Yong-Seok;Rhew, Doug-Hee;Jung, Kwang-Wook
Journal of Korean Society of Environmental Engineers
/
v.37
no.8
/
pp.480-491
/
2015
In this study, methods using LDC (Load Duration Curve) and watershed model were suggested to develope management targets and evaluate target achievement for non-point source pollution management considering watershed and runoff characteristics and possibility for achievement of target. These methods were applied for Saemangeum watershed which was designated as nonpoint source pollution management area recently. Flow duration interval of 5 to 40% was selected as flow range for management considering runoff characteristics and TP was selected as indicator for management. Management targets were developed based on scenarios for non-point source pollutant reduction of management priority areas using LDC method and HSPF model which was calibrated using 4 years data (2009~2012). In the scenario of LID, road sweeping and 50% reduction in CSOs and untreated sewage at Jeonju A20 and 30% reduction in fertilizer and 50% in livestock NPS at Mankyung C03, Dongjin A14 and KobuA14, management targets for Mangyung bridge, Dongjin bridge, Jeonju stream and Gunpo bridge were developed as TP 0.38, 0.18, 0.64 and 0.16 mg/L respectively. When TP loads at the target stations were assumed to have been reduced by a certain percentage (10%), management targets for those target stations were developed as TP 0.35, 0.17, 0.60 and 0.15 mg/L respectively. The result of this study is expected to be used as reference material for management master plan, implementation plan and implementation assessment for non-point source management area.
This study evaluated a model unconfined aquifer comprising a sand or gravel layer, a filter layer, a pumping well, and an observation well. The model was employed in step drawdown tests and then used to assess the permeability of each test tank. The optimal yield and well efficiency were then calculated. Evaluation of yield by step in sand layer filters of equal thickness gave optimized watering rates of 22.03 L/min in the double filter and 19.71 L/min in the single filter. The double filter's yield was 115.0% that of the single filter. A comparison of double and single filters, each 10 cm thick, showed the double filter to have a maximum yield of 182.7%. Yields for the gravel layer were 73.56 L/min for a double filter and 65.47 L/min for a single filter of the same thickness; the former value is 112.3% of that of the latter. Comparison of double and single filters with 10-cm-thick gravel layers revealed that the double filter had a maximum yield of 160.9%. Results for sand wells showed the double filter to have a maximum efficiency of 70.4% and the single filter to have a minimum efficiency of 37.1%. Gravel-layer well efficiencies were >66.5% for both double and single filters (each 30 cm thick), but only 22.5% for a 10-cm-thick single filter. This study confirms that permeability improved as the filter material became thicker; it also shows that a double filter has a higher yield and well efficiency than a single filter. These results can be applied to the practical design of wells.
Purpose: To evaluate the relationship between the clinical outcome and the cuff integrity following open repair in large and massive rotator cuff tears using ultrasonography as an imaging modality. Material and Methods: From November 2001 to April 2005, 17 cases(16 patients) who had open repair of tear measuring more than 3cm were assessed with minimal follow-up of 12 months in this study. 6 cases had a large tear and 11 cases a massive tear. There were 6 men and 11 women with a mean age of 52 years at surgery (range, 33 to 72 years). The evaluation consisted of the preoperative and postoperative shoulder scores according to UCLA shoulder scoring system and Visual analogue scale (VAS). Ultrasonography was performed by a experienced musculoskeletal physician at a minimum of 12 months postoperatively to evaluate the postoperative cuff integrity. Results: Retear were detected in four of seventeen cases. Regardless of the presence of recurrent tear, 14 cases had UCLA score of more than 29 points (good grade). All 17 had an improvement in the functional score, which increased from an average of 15.1 to 31.2 points. All cases showed pain relief and five cases had no pain. Sixteen cases except one had the range of motion of forward elevation above $90^{\circ}$. Conclusion: Open rotator cuff repair in large and massive tears showed low retear rate. At a minimum of twelve months follow-up, all cases had improvement on UCLA score, pain relief, increased range of motion of the shoulder regardless of retear. And the correlation between recurrent tear and function score was not statistically significant.
Journal of Korean Society of Environmental Engineers
/
v.34
no.4
/
pp.223-231
/
2012
The purpose of this study is to investigate basically the mechanism of heat transfer by the resolution of complex fluid flow inside a sophisticated designed screw dryer for the treatment of sewage sludge by using numerical analysis and experimental study. By doing this, the result was quite helpful to obtain the design criteria for enhancing drying efficiency, thereby achieving the optimal design of a multiple screw type dryer for treating inorganic and organic sludge wastes. One notable design feature of the dryer was to bypass a certain of fraction of the hot combustion gases into the bottom of the screw cylinder, by the fluid flow induction, across the delicately designed holes on the screw surface to agitate internally the sticky sludges. This offers many benefits not only in the enhancement of thermal efficiency even for the high viscosity material but also greater flexibility in the application of system design and operation. However, one careful precaution was made in operation in that when distributing the hot flue gas over the lump of sludge for internal agitation not to make any pore blocking and to avoid too much pressure drop caused by inertial resistance across the lump of sludge. The optimal retention time for rotating the screw at 1 rpm in order to treat 200 kg/hr of sewage sludge was determined empirically about 100 minutes. The corresponding optimal heat source was found to be 150,000 kcal/hr. A series of numerical calculation is performed to resolve flow characteristics in order to assist in the system design as function of important system and operational variables. The numerical calculation is successfully evaluated against experimental temperature profile and flow field characteristics. In general, the calculation results are physically reasonable and consistent in parametric study. In further studies, more quantitative data analyses such as pressure drop across the type and loading of drying sludge will be made for the system evaluation in experiment and calculation.
To investigate the desirable index for evaluation of frozen surimi's grades, the relationship between indices for grading of surimi, such as ATPase activity $(Ca^{2+}-,\;Mg^{2+}-\;and\;EDTA-)4, solubility, viscosity and K-value of frozen surimi and jelly strength of kamaboko was studied. The myofibrillar $Ca^{2+}-ATPase$ activity and solubility from frozen surimi of grades SA, FA, A, RA and B gave values of $1.184\pm0.2,\;0.956\pm0.14,\;0.766\pm/0.07,\;0.453\pm0.07\;and\;0.227\pm0.08$(umoles Pi/min/mg) for $Ca^{2+}-$ATPase activity and $93.19\pm5,\;84.62\pm4,\;70.63\pm5,\;41.21\pm4\;and\;32.82\pm4(\%)$ for solubility, respectively. Therefore, the myofibrillar $Ca^{2+}-$ATPase activity and solubility of surimi were closely related to the jelly strength of kamaboko from same material, as the correlation coefficient were 0.9584 and 0.9849, respectively. K-value, the index of freshness, was related to the jelly strength of frozen surimi as the correlation coefficient 0.9053 and shown as SA $15.67\pm1.4,\;FA\;14.94\pm 3,\;A\;28.00\pm5,\;RA\;32.16\pm3\;and \;B\;48.68\pm 5(\%)$. $Mg^{2+}-$ and EDTA-ATPase activity and viscosity were not related to the jelly strength. The $Ca^{2+}-$ATPase activity and solubility were found to be useful index for evaluating the quality of frozen surimi.
Park, Jong-Hyuk;Lee, Jun-Mo;Bae, Hyun-Kyung;Im, Jong-Han;Lee, Ju-Hong
Journal of Korean Orthopaedic Sports Medicine
/
v.8
no.2
/
pp.95-101
/
2009
Purpose: The purpose of this study was to determine how many of our patients who had had anterior cruciate ligament (ACL) reconstruction returned to their previous levels of sports and to identify why not doing so. Material and Methods: We evaluated 43 knees with a minimum of two years follow-up among whom undergoing 109 ACL reconstruction from September 2003. The mean age of patients was 26 years (17 to 45 years) Clinical results was evaluated according to the Lysholm Knee scores, Tegner activity score, subjective IKDC questionnaires, objective IKDC evaluation form and KT-1000 arthrometer. Results: The overall clinical results demonstrated significant improvement at the final follow-up comparing to preoperative data (P<0.05). Among 43 patients, 25 patients (58%) returned to their previous level of sports and 18 patients (42%) did not. Of whom, 11 patients (61%) were not able to return to sports due to fear to re-injury and 7 patients (39%) suffered from instability and pain. The differences in the Lysholm Scores, KT-1000 arthrometer and subjective IKDC in the 3 groups of patients by ANOVA test were found to be statistically significant (P<0.001). Although there is no difference in objective IKDC and KT-1000 arthrometer, the difference was observed in Tegner activities, subjective IKDC obtained by those who returned to sport and those who had fear to reinjury (P<0.001). Conclusion: This study showed that a quater of patients could not return to their previous level of sport after ACL reconstruction because of fear to reinjury. We thought that not only improving the technique of ACL reconstruction and systemic rehabilitation but also considering psychological factor of patients could allow more patients to return to the previous level of sports.
Journal of Korean Society of Environmental Engineers
/
v.36
no.7
/
pp.514-520
/
2014
In this study, the production potential of alternative coagulant ($Al_2(SO_4)_3$ solution) having the identical coagulation activity with respect to the commercial coagulant was investigated. The raw material of alternative coagulant was a spent catalyst including aluminium (waste activated alumina) generated in the manufacturing process of the polymer. The alternative coagulant was produced through a series of processes: 1) intense heat and grinding, 2) chemical polymerization and substitution with $H_2SO_4$ solution, 3) dissolution and dilution and 4) settling and separation. To determine the optimal operating conditions in the lab-scale autoclave and dissolver, the content of $Al_2O_3$ in alternative coagulant was analyzed according to changes of the purity of sulfuric acid, reaction temperature, injection ratio of sulfuric acid and water in the dissolver. The results showed that the alternative coagulant having the $Al_2O_3$ content of 7~8% was produced under the optimal conditions such as $H_2SO_4$ purity of 50%, reaction temperature of $120^{\circ}C$, injection ratio of $H_2SO_4$ of 5 times and injection ratio of water of 2.3 times in dissolver. In order to evaluate the coagulation activity of the alternative coagulant, the Jar-test was conducted to the effluent in aerobic reactor. As a result, in both cases of Al/P mole of 1.5 and 2.0, the coagulation activity of the alternative coagulant was higher than that of the existing commercial coagulant. When the production costs were compared between the alternative and commercial coagulant through economic analysis, the production cost reduction of about 50% was available in the case of the alternative coagulant. In addition, it was identified that the alternative coagulant could be applied at field wastewater treatment plant without environmental problem through ecological toxicity testing.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.