• Clean Technology
• /
• v.10 no.2
• /
• pp.73-87
• /
• 2004

In most of industrial fields, cleaning is employed for removing soils on their products or parts. Halogenated cleaning agents such as CFC-113, 1,1,1-TCE(1,1,1-trichloroethane), MC(methylene chloride) and TCE (trichloroethylene) have been used as cleaning ones in most of companies in the world since their excellent performance of cleaning ability and good material compatibility. However, CFC-113 and 1,1,1-TCE which are ozone destruction substances are not used any more in the advanced countries because of the which are ozone destruction substances are not used any more in the advanced countries because of the Montreal protocol. MC and TCE are now used restrictively at small part of industrial fields in most of countries since they are known to be hazardous or carcinogenic materials. Thus, it is indispensible that the alternative cleaning agents which are environmental-friendly and safe, and show good cleaning ability should be developed or utilized for replacement of the halogenated cleaning agents. Aqueous/semi-aqueous cleaning agents are evaluated to be promising alternative ones among various alternatives in environmental and economical view point. In this study, commercially available 12 aqueous and 6 semi-aqueous cleaning agents were selected and their physical properties, cleaning abilities, rinsing abilities and recycling of contaminated rinse water were measured and analyzed. Aqueous cleaning agents with higher wetting index showed better cleaning ability compared with those with lower wetting index. However wetting index did not have any correlation with cleaning ability in semi-aqueous cleaning agents. It was observed that soil concentration in aqueous and semi-aqueous cleaning agents should be maintained below the certain concentrations which depend on types of clearing agents. More than 70% soils in contaminated rinse water by some of aqueous and semi-aqueous clearing agents could be separated by simple settling method. This means that some cleaning agents with high oil-water separation efficiency will be effiective for recycling oil-contaminated rinse water. It was found that contaminated rinse water with aqueous agents was purified easiy by ultrafiltration method with PAN membrane of 30 kDa.

• Korean Journal of Food Science and Technology
• /
• v.37 no.6
• /
• pp.873-881
• /
• 2005

This study was conducted to improve the properties of frozen dough foods (buns and noodles etc.) on the quality deterioration with microwave oven cooking. Microwave is a useful cooking method, but it quickly takes moisture from food surface and makes lowering food quality abruptly. For improvement of these problems, mixing doughs with addition of various additives of 34 types manufactured respectively; starches, modified starches, gums and emulsifiers etc. Each mixing dough produced in sheet type $(30{\times}30{\times}1mm)$ and steamed them, was quickly froze at $-70^{\circ}C$ and packed with polyethylene. Packed samples kept at $-20^{\circ}C$ for 48 hours. After they were steam or microwave treatment packed or non-packed with polyethylene, studied for improvement effects of quality as sensory evaluation and selected 6 type additives; modified starches (TA, ST), gums (AR, GA) and emulsifiers (E, S1) as improvement agent. Because moisture loss from microwave oven cooking leads to quality deterioration of frozen dough foods, additive, such as including starches, modified starch, gums, and emusifiers were added to improve dough properties. Amylogram, scanning electron microscopy, textural analysis, and differential scanning calorimetry revealed addition of additives improved textural properties including surface-hardening of frozen dough foods compared to the control.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.3
• /
• pp.285-290
• /
• 2001

To utilize canned oyster processing waste water effectively, this study was carried out to prepare instant powdered soup using the waste water (IPSW), Instant powdered souu from oyster hot-water extracts (IPSE) was prepared by mixing hot-water extracts powder (15 g) with table salt (5 g), cream powder (19 g), milk replacer (12 g), wheat flour (20 g), corn flour (15 g), starch (5 g), glucose (7.5 g) and onion powder (1.5 g). In preparing IPSW, mixed powder from wash water and boiling liquid waste, instead of powder from hot-water extracts and table salt, was added (powder from boiling liquid waste: powder from wash water= 12: 8) and other additives were added in proportion to those in the IPSE, The IPSW consists mainly of carbohydrates (about $72\%$). It was not different from the IPSE. The volatile basic nitrogen, viable cell counts, coliform group of the IPSW contains 33.4 mg/100g, $2.2\times10^4CFU/g$, <180 MPN/100g, respectively, and its water activity has 0.257. So it was a hygienically safe and conservable instant food. The main fatty acids of IPSW were 16: 0 and 18: 1n-9. Its chemical score of protein was $61.4\%$ and its main inorganic matter was iron. According to a sensual evaluation, in contrast to the IPSE, the IPSW had a bit lower aroma but better taste, It was concluded from the above chemical and sensory evaluation that even the boiling liquid waste which had been mostly abandoned because of its high table salt content can be used as a good material for instant powdered soup if it's powdered and mixed adequately with powder from wash water, and its table salt content is properly adjusted.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.1
• /
• pp.41-51
• /
• 2012

We produced Hwanggiju (added 0.5~2.0% of ground Astragali Radix compared to starch contents) and investigated the physicochemical characteristics, DPPH free radical scavenging activities, polyphenol contents, and sensory evaluation. For all treatments, the initial pH was 3.9~4.1 and gradually decreased for 6 days from the 1st mashing day, and then rapidly increased to 4.67. As the fermentation proceeded, total acid contents increased in most of the treatments, reduced temporarily after the 2nd mashing time because of the addition of starch material and water, and then slightly rose again. There were little changes in pH and total acid contents followed by adding ground Astragali Radix (AR) to the fermentation periods. Amino acidities of all treatments showed patterns of which consistently rose as the fermentation proceeded and slightly reduced followed by increasing the addition rate of ground AR to the mashes. Soluble solid and alcohol contents also increased continuously and there were few differences among the treatments followed by adding to the ground AR rate. In color, there was no differences in L value, but a and b value showed significant differences by adding ground AR rate. In DPPH free radical scavenging activities, the control (no AR added) showed 53.6% and when grinded AR added, there were improving effects of the activities (0.52~6.9%). In polyphenol contents, the control was 1.05 mg/mL and the ground AR added treatments increased slightly. In the sensory evaluation, the control received a relatively high score ($5.0{\pm}1.0$), and the treatments which added 0.5% ground AR during the 2nd mashing time were also well received ($4.5{\pm}1.3$).

• Investigative Magnetic Resonance Imaging
• /
• v.2 no.1
• /
• pp.96-103
• /
• 1998

Purpose : To assess the clinical utility of turbo contrast-enhanced magnetic resonance angiography(CE MRA) in the evaluation of the aortic arch and its major branches and to compare the image quality of CE MRA among different coils used. Materials and Methods : Turbo three-phase dynamic CE MRA encompassing aortic arch and its major branches was prospectively performed after manual bolus IV injection of contrast material in 29 patients with suspected cerebrovascular diseases at 1.0T MR unit. the raw data were obtained with 3-D FISH sequence (TR 5.4ms, TE 2.3ms, flip angle 30, slab thickness 80nm, effective slice thickness 4.0mm, matrix size $100{\times}256$, FOV 280mm). Total data acquisition time was 4. to 60 seconds. We subjectively evaluated the imge quality with three-rating scheme : "good" for unequivocal normal finding, "fair" for relatively satisfactory quality to diagnose 'normal' despite intravascular low signal, and "poor" for equivocal diagnosis or non-visualization of the origin or segment of the vessels due to low signal or artifacts which needs catheter angiography. At the level of the carotid bifurcation, it was compared with conventional 2D-TOF MRA image. Overall image quality was also compared visually and quantitatively by measuring signal-to-noise ratios (SNRs) of the ascending aorta, the innominate artery and both common carotid arteries among the three different coils used(CP body array(n=12), CP neck array(n=9), and head-and-neck(n=8). Results : Demonstration of the aortic arch and its major branches was rated as "good" in 55% (16/29) and "fair" in 34%(10/29). At the level of the carotid bifurcation, image quality of turbo CE MRA was same as or better than conventional 2D-TOF MRA in 65% (17/26). Overall image quality and SNR were significantlygreater with CP body array coil than with CP neck array or head-and-neck coil. Conclusions : Turbo CE MRA can be used as a screening exam in the evaluation of the major branches of the aortic arch from their origin to the skull base. Overall imagequality appears to be better with CP body array coil than with CP neck array coil or head-and-neck coil.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Culinary science and hospitality research
• /
• v.19 no.5
• /
• pp.196-205
• /
• 2013

This study showed the chemico-physical characteristics and sensory evaluation of beef loin and ribs with various kinds of cooking apparatus and methods like pan heating, boiling, grilling, steaming, cooking heating, charcoal heating and double layer pan heating. Double layer pan filled with Phase Change Materials(PCM) heating was also tested. Heating time of beef loin and ribs by oven heating was the longest as 55.5 and 25.7 min. Cooking loss of beef loin and ribs were 40.49%, 27.98% each and showed biggest in charcoal heating(p<0.05). In the chemical analysis, grilling resulted in the highest protein contents of 29.3% in the loin and double layer pan heating had 28.6% in the ribs. In the loin, 20.3% of crude fat was the highest in the double layer pan heating, and 21.9% of crude fat of ribs in the PCM heating(p<0.05). In the test of shearing forces, double layer pan heating had the lowest result of $9.14kg/cm^2$ in the loin and $7.03kg/cm^2$ in the ribs. In the 9 point-scale sensory evaluation, PCM treatment showed the best result of 7.67 in the juiciness of loin and single layer pan heating and grilling treatment had the highest score of 7.00 in the ribs. Loin in the PCM heating had 7.11 and ribs in the grilling had 7.13, showing the best in overall acceptability. With this experiments, we could find the chemico-physical and sensory characteristics of beef loin and ribs were affected by various cooking methods.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.4
• /
• pp.299-310
• /
• 2019

The eating quality of rice is one of the main concerns of rice breeding programs in many countries, especially in japonica rice cultivation areas. To select new resources with high eating quality from Korean native japonica rice, we evaluated a total of 76 varieties, including 47 native rice resources (26 landraces + 21 weedy rice) of Korea. In this study, all eating quality traits varied widely among the native resources, and some of the native resources revealed a high evaluation score in the palatability, expected eating quality, and physicochemical traits among the tested whole-plant materials. From the results, we selected two landraces (Sangdo and Waebyeo) and three weedy rice varieties (Hoengseongaengmi3, Namjejuaengmi6, and Wandoaengmi6) as promising resources for improvement of rice eating quality. Specifically, Wandoaengmi6 presented potential as a key breeding material for improving the eating quality of Korean rice cultivars, having the best evaluation results in palatability score (PS 0.83) from the sensory test and glossiness value (GV 81.8) from the Toyo taste meter of cooked rice. Given the urgent need to overcome the constraint of the narrow genetic background of Korean japonica rice, the results could be a practical solution for exploring new opportunities for improving rice eating quality through the expansion of genetic resources.

• Korean journal of food and cookery science
• /
• v.21 no.6 s.90
• /
• pp.895-907
• /
• 2005

In an attempt to improve the taste and storage characteristics of Sulgidduk, a Korean traditional rice cake product, baekbokryung(White Poria cocos Wolf) powder was supplemented as one of the ingredients and Product Quality waw assessed. The baekbokryung Powder was added in rations of 0, 5, 7, 10, and $15\%$(w/w) per rice powder during the raw material preparations. The sensory, objective quality, and microbiological characteristics of the products were examined at 4-hr intervals during storage for 36 hours at $20^{\circ}C$ The sensory evaluation was conducted based on the acceptability and intensity characteristics of the product. In the acceptability test, a $5\%$ treatment wae renerally ranked with the highest score, among all the treatments while the preference differed according to ages of the panels ; namely, those in their 20's to 30's liked a $5\%$ supplementation while those in their 40's to 60's Preferred a $7\%$ one. The addition of baekbokryung Powder proportionally decreased the moisture content of the products. The colorimetric redness(a) and yellowness(b) of the Products increased with increasing added baekbokryung Powder. The redness values began to decrease slowly from the beginning while the rates were accelerated after 8 to 12 hours of the storage. In the textural characteristics, hardness, gumminess and adhesiveness values increased with increasing added baekbokryung powder. The rapid increase in adhesiveness during the initial 4 hour of storage and the following stabilization was noted. Cohesiveness and springiness values tended to decrease gradually with increasing added baekbokryung Powder. Except for the control sample, no significant differences in the total microbial counts among the treatments were noted. After 20 hours of storage, the control sample exhibited a rapid increase in total microbial count, while the Proliferations of microorganisms were rather suppressed in baekbokryung Powder treatments according to the added amounts The results of the study support the benefits of baekbokryung powder supplementation in Sulgidduk in the aspects of taste and functionality. The degree of further increase of baekbokryung Powder in Sulgidduk without causing the adverse qualify effects remains for future study.

• Korean Journal of Food Science and Technology
• /
• v.34 no.4
• /
• pp.617-624
• /
• 2002

Health drinks were prepared with freeze dried powder of 60% ethanol extract (60% EFDP), 60% ethanol extract after hydrolysis with amyloglucosidase (60% AEFDP) and 80% ethanol extract (80% EFDP) from roasted safflower seed. Quality characteristics and antioxidative properties were investigated. Yield of freeze dried powders were ranged in $4.67%{\sim}5.62%$. Brix, pH and titratable acidity of safflower drinks were ranged in $11.4{\sim}14.2%$, $2.83{\sim}3.34$ and $0.09{\sim}0.91%$, respectively. Content of total phenolic compounds was much more in 80% EFDP (117 mg/g) and safflower drink-I (SD-I, 440 ppm) than others. Content of total flavonoid was observed in higher level in 60% EFDP (49 mg/g) and safflower drink-V (SD-V, 138 ppm) than others. Antioxidant compounds such as N-[2-(5-hydroxy-1H-indol-3-yl)ethyl]ferulamide(serotonin-I) and N-[2-(5-hydroxy-1H-indol-3yl)ethyl]-p-coumaramide(serotonin-II) exhibited higher contents of 21.09 ppm, 33.56 ppm in 60% EFDP and of 3.83 ppm, 5.81 ppm in safflower drink-II (SD-II) than others. Content of acacetin was much more in 80% EFDP (13.53 ppm) and safflower drink-IV (SD-IV, 1.14 ppm) than others. From the DPPH test to measure antioxidant activity, it was shown that 80% EFDP and SD-I have stronger scavenging activities of 94.58% and 94.88%, respectively, while BHA standard solution does 93.88%. Among drinks, SD-II was revealed to have highest level on overall acceptance, color and flavor through sensory evaluation. These results induced that safflower seed can be used as natural antioxidant and functional food material.