• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.5
• /
• pp.53-61
• /
• 1995

Analyses of subsurface drainage effects of farmland with respect to pipe and envelop material are made by the laboratory experiments using soil box to give basic information for the subsurface drainage system planning and design. Three different diameter PVC perforated pipes and a mesh pipe are used with envelop materials such as sand, rice bran, and crushed stone. Steady state subsurface drainage flow rate increased as envelop material changed from sand to rice bran and crushed stone. This indicates that as the hydraulic conductivity of the envelop material increases, the drainage flow rate increases. On the other hand, for a given envelop material, the mesh pipe which has the largest openning area shows the largest flow rate while small diameter PVC pipes show small flow rates. This tells that as the openning area and pipe diameter increase, the flow rate increases, too. Therefore, selection of pipe and envelop material should be made in accordance with the design drainage flow rate. Unsteady state subsurface drainage flow rate with respect to time differs for different envelop material. In case the sand was used as an envelop material, the small diameter PVC pipes show larger flow rates than the large diameter PVC pipe and mesh pipe. When the rice bran was used, the mesh pipe shows the largest flow rate, while small diameter pipes show smaller flow rates. In case the crushed stone was used as an envelop material, the large diameter PVC pipe and mesh pipe show larger flow rates, while small diameter pipes show a little bit smaller flow rates. However, the variation of flow rates among different pipes is the smallest when the crushed stone is used. The flow rate curve with respect to the pipe changes little for the crushed stone envelop which has a large hydraulic conductivity, while that changes much for the sand and rice bran envelops. However, it is difficult to draw a consistent relationship between the drainage flow rate and pipe for all the envelop materials. Since the subsurface drainage experiments are made only under the restricted laboratory condition in this study, further study including field experiment is required.

• Composites Research
• /
• v.23 no.3
• /
• pp.37-42
• /
• 2010

The fiber material properties, elastic constant and strength, are the most important factors among the various material properties for the design of composite pressure vessel, because of it's dominant influence on the performance of composite pressure vessel. That is, the deformation and burst pressure of pressure vessel highly affected by the fiber material properties. Therefore, the establishment of test method for exact fiber material properties is a priority item to design a composite pressure vessel. However, the fiber material properties in filament wound pressure vessel is very sensitive on various processing variables (equipment, operator and environmental condition etc..) and size effect, so that it isn't possible to measure exact fiber material properties from existing test methods. The hydro-burst test with full scale pressure vessel is a best method to obtain fiber material properties, but it requires a enormous cost. Thus, this paper suggests a newly developed test method, hoop ring test, that is capable of pressure testing with ring specimens extracted from real composite pressure vessel. The fiber material properties from hoop ring test method showed good agreement with the results of hydro-burst test with full scale composite pressure vessels.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.747-750
• /
• 2007

Information of construction material is served through internet to user but it is poor to use information of construction material because of lack of information which is accumulated and insufficience of standardization. So informationization of civil materials are closely connected with works and then it is promoted to be used through works like design, construction etc. Informationization for management of information of construction material which reflects questionnaires about opinion of workers presents promotion by stage considering first, continuous renewal of information of construction material and increase in quantity, second classification system and standardization of terms in order to share and connect information of construction material third, developing inquiry method of material information needed in construction stage fourth, connecting material information DB and application through design and construction.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.3 s.162
• /
• pp.343-350
• /
• 2007

This study compared and studied the clothing mobility of two types of aerobic clothes - those made of currently popular stretch materials and those made of new stretch materials that were specially developed for this study. The focus of the comparison was on the range of joint movement during activity, and the physiological burden imposed on the body by the clothes. In total, 18 experiments were carried out under controlled conditions in an artificial climatic chamber with a temperature of $25{\pm}1^{\circ}C$, air humidity of $60{\pm}5^{\circ}C$ and negligible air movement. Each exercise program consisted of a 30-minute of aerobic workout and a 20-minute rest following the exercise. Measurements were taken to determine the following: physiological reactions (whole-body and local sweat rates), subjective sensations(of temperature, humidity, comfort, tightness, and clothing wetness), joint angle(measured with a goniometer), and so on. The results of the study us as follows: Material B excels in clothing mobility. Material C excels in sweat absorbency and drying speed. Material A was found to be the hottest material, while material C was found to be slightly hot through the analysis of the change in pre- and post-exercise bodyweight(= amount of sweat). Regarding the amount of evaporated sweat, material A>material C>material B. Material B produced the smallest amount of evaporated sweat. The wider the range of joint movement, the smaller the amount of sweat and the lower the average skin temperature.

• Journal of the Korean Society of Radiology
• /
• v.16 no.5
• /
• pp.527-536
• /
• 2022

The radiation shielding characteristic of neutron shielding material has been studied as the preliminary study in order to design cosmic-ray shielding material. Specially, Soft Magnetic Material, known to be effective in EMP and radiation shielding, has been investigated to check if the material would be applicable to cosmic-ray shielding. In this work, thermal neutron shielding experiment was conducted and the Monte Carlo N-Particle(MCNP) was applied to employ skymap.dat, which is cosmic-ray data embedded in MCNP. As a result, polyethylene, borated polyethylene, and carbon nano tube, containing carbon or hydrogen, have been found to be effective in reduction of neutron flux below 20 MeV (including thermal, epithermal, evaporation). In contrast, the materials composed of iron such as SS316 and Soft Magnetic Material show a good shielding performance in the cascade energy range (above 20 MeV). Since Soft Magnetic Material is consisting of 13% of boron, it can also decrease thermal neutron flux, so it is expected that it would show a significant reduction on the entire range of neutron energy if the Soft Magnetic Material is used with hydrogen and carbon, so called low Z material.

• The Journal of the Korea Contents Association
• /
• v.21 no.2
• /
• pp.148-160
• /
• 2021

Although a great deal of research has been carried out recently with the rise of importance of the UI design, little research has been conducted on the new Neumorphism design. Given the paucity of the research, we demonstrated the development process of GUI design, focusing on the UI design trends, Skeuomorphism, Flat, Material design and the emerging Neumorphism design. Based on this, the aim of the study is to look into the possibility of Neumorphism design, which is currently drawing attention, as the new UI design trends. This study was ordered as follows in two ways. First, drawing from the work of literature, we illustrated the UI design trends by considering the Skeuomorphism, Flat, and Material Design which were before the advent of the Neumorphism design. In addition, we conducted a study on the characteristics and limitations of the UI design trends through actual cases in which UI designs were applied. Second, the Material design as the most recent UI design trends and the Neumorphism design were compared with the method of expression based on the definition and characteristics of Neumorphism design that we investigated. In this context, we also analyzed the possibility of Neumorphism becoming the new UI design trend. We proposed an application of the design to maximize the benefits. This study is meaningful in that the Neumorphism design, which has yet to be studied, is likely to become the UI design trends in the future.

• Korean Institute of Interior Design Journal
• /
• v.21 no.1
• /
• pp.86-94
• /
• 2012

The purpose of this study was to examine the importance of eco-friendly design elements related to residential space by residents and what element they prefer. To achieve this, 18 eco-friendly design elements related to residential space were selected from the Green Building Certification Criteria and the relevant research papers. These elements were categorized into four areas; the ecological environment area (4 elements), the indoor environmental climate one (4 elements), the energy and resource saving one (6 ones), and the material one(4 ones). On the base of these 18 elements, the importance degree of each element was examined by using 5-point Likert scale. The subjects were 299 housewives living in apartment houses in Jangyu new town, Gimhae. The subjects perceived strongly the importance of eco-friendly design elements, but many of them did not know about Green Building Certification Criteria. Overall importance of 18 elements by the residents was very high. Also, the indoor environmental climate area was considered as the most important one, followed by the energy and resource saving area, the material area, and the ecological environment one.

• Korean Institute of Interior Design Journal
• /
• v.20 no.2
• /
• pp.10-19
• /
• 2011

This study is to predict the possibilities of phenomenological spatial design, by recognizing that a phenomenological spatial design brings about a change in the type, regime, role and materials of a spatiality due to the effect of contemporary digital technology and by analyzing their characteristics. Therefore, the study is based on the phenomenology of perception of Morris Merleau Ponty, which has the same concept to contemporary out-of-material and out-of-hierarchical paradigm. The case study has been carried out by selecting some of all works since 1980s, which were influenced by Merleau-Ponty. The analyses were performed by substituting the cases into the spatiality of Situation, spatiality of participation and creation, spatiality of retrospect and prospect, and the spatiality of unpredictability, which were the concept of phenomenological space of Merleau-Ponty for the analyses of features of type, regime, role and material of a spatial design. This article has a great significance in expecting the possibilities of changes of phenomenological spatial design by examining the characteristics of phenomenological spatial design.

• Korean Institute of Interior Design Journal
• /
• v.26 no.5
• /
• pp.16-24
• /
• 2017

This study examines Safdie's design philosophy: place, purpose, and process and design strategies found in museum buildings. Safdie, influenced by personal background as immigrant, education of McGil University in Canada, apprenticeship from Louis Kahn, is one of the most recognized architects who designed renowned public and cultural buildings after Habitat 67 in Montreal, Canada. In order to reveal design strategies his eight museum buildings has been selected and analyzed in terms of interpretation of context, program presented in floor plan and section design, and the process of integrity found in structure and material. The results of this paper can be summarized as follows: 1) Reflection of existing context and regeneration of the locality has been in a creative way to reinforce the sense of place. 2) The layout of major and gallery space is determined according to the Safdie's interpretation of the site context and this can be categorized into three types. 3) Integration of the innovative structural frame and material has been experimented by using tartan grid and toroid form in the major and gallery spaces. This study is intended to reevaluate the significance of Safdie's design approach to building uniqueness of the site, program and tectonic.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.6 s.154
• /
• pp.840-850
• /
• 2006

This thesis that is written by inquiring the shoes of 1990's, is written in order to propose the method of analyzing the changes of shoes design systematically. The picture to be gathered was a content analysis low at ARS and Accessory Collegioni since though the research method took shoes to $1990{\sim}1999$. I categorized the design factors into shape, material, color, decoration. by using those category, the result of analysis of design character. In 1,990's, boots, pumps and straps were the most popular in upper, point and rounded cuban and french were the most popular in toe, leather was the most popular in materiel, suede in F/W and patent in S/S. Black was the most popular color, brown in F/W and white/beige in S/S were the second. Re-created shape that was constructed through the reconstructions of structures and shapes of shoes, shape that was expanded to other genre were appeared in character of design factor. Material image was strengthened by varying patterns of unburned calf, leopard and zebra. Recognition of shoes color was expanded by using unique colorations and abstract, fresh figure colors. Post-modem tendency was appeared like using brassiere strap instead of back strap or using round string in elegant shoes.