• Journal of Periodontal and Implant Science
• /
• v.49 no.1
• /
• pp.14-24
• /
• 2019

Purpose: To assess the influence of using different combinations of guided bone regeneration (GBR) materials on volume changes after wound closure at peri-implant dehiscence defects. Methods: In 5 pig mandibles, standardized bone defects were created and implants were centrally placed. The defects were augmented using different combinations of GBR materials: xenogeneic granulate and collagen membrane (group 1, n=10), xenogeneic granulate and alloplastic membrane (group 2, n=10), alloplastic granulates and alloplastic membrane (group 3, n=10). The horizontal thickness was assessed using cone-beam computed tomography before and after suturing. Measurements were performed at the implant shoulder (HT0) and at 1 mm (HT1) and 2mm (HT2) below. The data were statistically analysed using the Wilcoxon signed-rank test to evaluate within-group differences. Bonferroni correction was applied when calculating statistical significance between the groups. Results: The mean horizontal thickness before suturing was $2.55{\pm}0.53mm$ (group 1), $1.94{\pm}0.56mm$ (group 2), and $2.49{\pm}0.73mm$ (group 3). Post-suturing, the values were $1.47{\pm}0.31mm$ (group 1), $1.77{\pm}0.27mm$ (group 2), and $2.00{\pm}0.48mm$ (group 3). All groups demonstrated a loss of horizontal dimension. Intragroup changes exhibited significant differences in group 1 (P<0.001) and group 3 (P<0.01). Intergroup comparisons revealed statistically significant differences of the relative changes between groups 1 and 2 (P=0.033) and groups 1 and 3 (P=0.015). Conclusions: Volume change after wound closure was minimized by using an alloplastic membrane. The stability of the augmented horizontal thickness was most ensured by using this type of membrane irrespective of the bone substitute material used for membrane support.

• Journal of Fashion Business
• /
• v.25 no.4
• /
• pp.14-35
• /
• 2021

This study compares and analyzes the designs of Burberry creative directors, Christopher Bailey and Riccardo Tisci. For this purpose, 322 photographs (176 Christopher Bailey and 146 Riccardo Tisci) were collected and the data analysis criteria were classified into color, shape, material, decoration, item, and fashion style. With respect to the data analysis method, statistical analysis and content analysis were combined. First, the design characteristics of Christopher Bailey top and bottom combined bright tone, tone-in-tone color scheme, H-line, heterogeneous material combination, and smart casual appeared very frequently. Second, the design characteristics of Riccardo Tisci top and bottom combined were monotone, tone-on-tone color scheme, H-line, heterogeneous material combinations, and street culture. Third, the design differences between creative directors were significantly different in color, tone, color arrangement, pattern, material type, material combination, detail, top and bottom items, and fashion style. Burberry men's wear maintains Burberry's traditional design identity with achromatic colors, beige-based colors, and beige checks. Christopher Bailey's design direction is characterized by modernity in a casual mood that emphasizes practicality. The design direction of Riccardo Tisci is characterized by a wide gap between images in a semi-formal style that emphasizes Burberry's tradition and a free-spirited casual style.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.20 no.1
• /
• pp.66-74
• /
• 2024

This study investigates the effects of temperatures and strain rates on the strength and ductility of Gr.91 (ASME Grade 91) steel which is widely being used as a heat-resistant material in Generation IV nuclear and super critical thermal power plants. The tensile behavior of modified 9Cr-1Mo (Gr.91) steel was studied for the three strain rates of 6.67×10^-5/s, 6.67×10^-4/s and 6.67×10-3/s over the temperature range from room temperature (RT) to 650℃. Experimental results showed that at specific combinations of temperatures (300~400℃) and strain rates, serrations appeared in the stress-strain curves. Concurrently, abnormal behaviors such as a plateau in yield strength and tensile strength, a minimum in ductility and negative strain rate sensitivity were observed. These phenomena were analyzed as significant characteristics of dynamic strain aging (DSA). Since this abnormal behavior in Gr.91 steel affects the material strength, it is judged that a correlation analysis between DSA and material strength should be crucial in the design and integrity evaluation of Gr. 91 steel pressure vessel and piping subjected to high-temperature loading.

• Speech Sciences
• /
• v.9 no.1
• /
• pp.185-192
• /
• 2002

This study classifies Korean syllables into various types and investigates the distribution of syllables by each type. Korean syllables are classified into four or eight types. In this study, they are classified into thirty-two types based on character combination in order to evaluate the intelligibility of Korean synthetic syllables. Among those Korean syllables derived from the possible combinations of Korean characters, only currently used syllables were selected. Based on this classification and distribution, representative and diagnosable testing materials can be made. These testing materials can be applicable to intelligibility tests of Korean synthetic syllables.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1843-1850
• /
• 2000

Sound absorption coefficient for the absorptive panels comprized of a perforated plate. an absorbent material and an air gap was measured and compared with theoretical value. The absorptive panels are composed of three basic combinations (a perforated plate + an air gap + an absorbent material. a perforated plate + an absorbent material, a perforated plate + an absorbent material + an air gap). As a result. it is found that the sound absorption for low frequency range is strongly affected by the resonance produced by perforated plate and air gap. And the sound absorption for high frequency depends on the porosity of perforated plate.

• Journal of Industrial Technology
• /
• v.26 no.B
• /
• pp.111-118
• /
• 2006

The reinforced concrete structure is one of the most popular structures in real construction. Concrete has been strengtened rapidly due to the development of new material and construction technology. But as the concrete has been getting stronger, the brittleness of material has increased and the better ductility has been required. So, the study for strengthening stiffener has been urgently needed. As we said above, it is expected that the use of high strength steel and concrete will be increased. However, The experimental data is not enough for solving problems of the use of high strengthened steel and concrete. In this research, we analyzed 45 combinations of the strength levels of concrete, the thickness of material and the steel strength with regard to simple Reinforced Concrete SLAB Beam bridge. The program MIDAS CIVIL was used to find the optimal combination. As a result, it was found that strength ratio per unit section is in inverse proportion to the strength of material and that the strengths of steel are respectively 400 MPa for low strengthened concrete and 300 MPa for high strengthened concrete. For economic aspect and usability, the effect of high strength steel is not as high as we expected it would be.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.141-144
• /
• 2006

The main purpose of this study is to develop a Sprayed FRP repair and strengthening method, which is a new technique for strengthening the existing concrete structures by mixing carbon or glass shot fibers and the epoxy or vinyl ester resins with high-speed compressed air in open air and randomly spraying the mixture onto the concrete surface. At present, the Sprayed FRP repair and strengthening method using the epoxy resin has not been fully discussed. In order to investigate the material property of Sprayed FRP, this study carried out tensile tests of the material specimens which are changed with the combinations of various variables such as the length of shot fiber and mixture ratio of shot fiber and resin. These variables are set to have the material strength equal to one layer of the FRP sheet. As a result, the optimal length of glass and carbon shot fibers were derived into 3.8cm, and the optimal mixture ratio was also deriver into 1:2 from each variable. And also, the thickness of Sprayed FRP to have the strength equal to one layer of FRP sheet was finally calculated.

• Steel and Composite Structures
• /
• v.27 no.1
• /
• pp.89-94
• /
• 2018

Uniaxial ratcheting behavior of Z2CND18.12N austenitic stainless steel used nuclear power plant piping material was studied. The results indicated that ratcheting strain increased with increasing of stress amplitude under the same mean stress and different stress amplitude, ratcheting strain increased with increasing of mean stress under the same stress amplitude and different mean stress. Based on least square method, a suitable method to arrest ratcheting by loading the materials was proposed, namely determined method of zero ratcheting strain rate. Zero ratcheting strain rate occur under specified mean stress and stress amplitudes. Moreover, three dimensional ratcheting boundary surface graph was established with stress amplitude, mean stress and ratcheting strain rate. This represents a graphical surface zone to study the ratcheting strain rates for various mean stress and stress amplitude combinations. The graph showed the ratcheting behavior under various combinations of mean and amplitude stresses. The graph was also expressed with the help of experimental results of certain sets of mean and stress amplitude conditions. Further, experimentation cost and time can be saved.

• Advances in materials Research
• /
• v.8 no.4
• /
• pp.275-293
• /
• 2019

The engine parts material used in gas turbines (GTs) should be resistant to high-temperature variations. Thermal barrier coatings (TBCs) for gas turbine blades are found to have a significant effect on prolonging the life cycle of turbine blades by providing additional heat resistance. This work is to study the performance of TBCs on the high-temperature environment of the turbine blades. It is understood that this coating will increase the lifecycles of blade parts and decrease maintainence and repair costs. Experiments were performed on the gas turbine blade to see the effect of TBCs in different combinations of materials through the air plasma method. Three-layered coatings using materials INCONEL 718 as base coating, NiCoCrAIY as middle coating, and La₂Ce₂O₇ as the top coating was applied. Finite element analysis was performed using a two-dimensional method to optimize the suitable formulation of coatings on the blade. Temperature distributions for different combinations of coatings layers with different materials and thickness were studied. Additionally, three-dimensional thermal stress analysis was performed on the blade with a commercial code. Results on the effect of TBCs shows a significant improvement in thermal resistance compared to the uncoated gas turbine blade.

• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.95-99
• /
• 1997

Most studies in manual material handling (MMH) have paid more attention to single MMH activities-lifting, lowering, carrying, holding, pushing or pulling and have ignored combined activities. Also, many studies have been involved with two-handed MMH activities rather than to one-handed MMH activities. Very few studies are reported on the determination of workers' capacities for combinations of one-handed MMH activities (e.g. lifting a box, then carrying the box, and lowering the box). The objective of this study was to utilize the psychophysical approach to examine the combinations of lifting, carrying and lowering activities from a simulated industrial task involving one- handed and two-handed combined tasks and to develop mathematical models for combined tasks. Ten male students served as subjects for the study. The capacities that were determined as the maximum acceptable weight workloads for 1 hr work period for one-handed and two-handed combined tasks-lifting a box from floor to knuckle height, carrying the box for 4.3 m, and lowering the box form knuckle to floor height -were determined psychophysically under three frequencies: six handlings per minute, one handling per minute and one handling per five minutes. Combined MMH capacities models for one-handed tasks were developed. Te advantages and disadvantages of different models are discussed.