• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1115-1118
• /
• 2003

A great part of flint fuel is Hydrogen and carbon's combination. they should be generated steam and carbon gas when combine with oxygen for perfect combustion in the inside of engine, but the pollutive material especially NOx and Soot are exhausted, even though fuel is combine perfectly. In this paper the characteristics of exhaust material from diesel engine is investigated for the corona discharge-EGR hybrid plasma reactor, which combined corona discharge with EGR system. NOx is decreased in all load and applied voltage to plasma reactor. However Soot is increased as increasing EGR rate and it is decreased as increasing applied voltage.

• 대한간호학회지
• /
• 제34권2호
• /
• pp.297-306
• /
• 2004

Purpose: This study was done to identify the relationship between social support and morale in the elderly. Method: A structured questionnaire was carried out from April, 2003 to June, 2003 on 203 elderly. The data was analyzed with a SPSS program for descriptive statistics, Pearson's correlation coefficients, t-test, ANOVA, and stepwise multiple regression was done Result: The level of social support was moderate, and family support was the highest score. In types of support, appraisal support was the highest score. The level of morale was slightly lower than moderate, and the score of social support showed significantly positive correlation with morale. In general characteristics, several variables were significantly related to social support and morale. The most powerful predictor of morale was material support by family and the variance was 19.6%. A combination of material support by family, emotional support by relatives, level of satisfaction with pocket money, perceived health, level of intimacy with one's children, and material support by friends account for 43.3% of the variance in morale of the elderly. Conclusion: To increase the morale of the elderly, it is necessary to consolidate material support by family and relatives.

• 소성∙가공
• /
• 제8권5호
• /
• pp.429-436
• /
• 1999

In sheet metal forming , forming limit diagram is very important to design and analyze of sheet metal forming process. Recently tailor welded blanks of different thickness and different material and strength combinations are used widely in automobile industry to reduce car manufacturing cost. In order to analyze the forming characteristics of tailored welded blanks, we have investigated the forming limit dia-grams for 3 kinds of different material using mash seam and laser welding experimentally and dis-cussed for the characteristics of forming for tailor welded blanks. It is concluded that forming limit dia-gram for the different material combination TWB locates between FLD of the thinner base material sheet and the thicker ones.

• 복식문화연구
• /
• 제7권1호
• /
• pp.13-26
• /
• 1999

The purpose of this study was to identify the origin of diversity of costume material caused by environmental difference. For this purpose, this research involved theoretical studies and studies based on historical data obtained from previous related studies. The common truth was proved that environmental including the geographical distribution of plants and animals determines costume material. Also, It was found that the unique traditional costume styles were developed through unique combination of costume material and their culture. The major results of this study are as follow : 1. The traditional costume of North American Indian was well-developed and closely related to geographical distribution of plants and animals. Also, their costume was so diverse that it could not be categorized. 2. The traditional costume of North American Indian showed ideal har mony between nature and human being surrounding environment into their costume. 3. The application of plants and animal materials into their costume was one of the environment-friendly human activity and it seems to give us an important message.

• Journal of Magnetics
• /
• 제16권3호
• /
• pp.240-245
• /
• 2011

A new hybrid ON/OFF method is presented for the fast solution of electromagnetic inverse problems in high frequency domains. The proposed method utilizes both topological sensitivity (TS) and material sensitivity (MS) to update material properties in unit design cells. MS provides smooth design space and stable convergence, while TS enables sudden changes of material distribution when MS slows down. This combination of two sensitivities enables a reduction in total computation time. The TS and MS analyses are based on a variational approach and an adjoint variable method (AVM), which permits direct calculation of both sensitivity values from field solutions of the primary and adjoint systems. Investigation of the formulations of TS and MS reveals that they have similar forms, and implementation of the hybrid ON/OFF method that uses both sensitivities can be achieved by one optimization module. The proposed method is applied to dielectric material reconstruction problems, and the results show the feasibility and effectiveness of the method.

• Carbon letters
• /
• 제5권1호
• /
• pp.6-11
• /
• 2004

In spite of unparalleled combination of essential material properties for brake linings and clutch facings, replacement for asbestos is seriously called for since it is a health hazard. Once asbestos is replaced with other material then composition and properties of brake pad changes. In certain cases hardness of the material may be high enough to affect the rotor material. In this study, hardness of the brake pad has been controlled using suitable reinforcement materials like glass, carbon and Kevlar pulp. Brake pad formulations were made using CNSL (cashew net shell liquid) modified phenolic resin as a binder, graphite or cashew dust as a friction modifier and barium sulphate, talc and wollastonite as fillers. Influence of each component on the hardness value has been studied and a proper formulation has been arrived at to obtain hardness values around 35 on Scleroscopic scale. Friction and wear properties of the respective brake pad materials have been measured on a dynamometer and their performance was evaluated.

• 한국전기전자재료학회논문지
• /
• 제27권12호
• /
• pp.877-882
• /
• 2014

It has been confirmed that the inner defect of transformer and the perfect diagnosis for aging are closely related to safe electric power transmission system and that the detection of accident and diagnosis technique turn out to be very important issues. Since electric power machinery consists of various kinds of components, however, it is very difficult to make a diagnosis for aging by one parameter. Thus, diagnosis for aging is feasible only through the combination of various parameters. Recently, various expert systems have been developed and applied to diagnosis for aging, but they are not yet reliable enough to apply to the real system. In this paper, XLPE which is ultra high voltage cable insulator material were chosen to investigate the influence of void on insulator material using partial discharge. Obtained data have been processed by PRPD (phased resolved partial discharge) distribution function and K-means. And statistical and cluster distribution of partial discharge have been analysed and investigated.

• 한국표면공학회지
• /
• 제45권5호
• /
• pp.188-192
• /
• 2012

The hetero junction on dielectrics and ferrite for LTCC was prepared by using NiCuZn ferrite. The shrinkage behaviour of ferrite tapes in combination with a dielectric tape was investigated. The characteristics of NiCuZn ferrite were investigated using XRD (X-ray diffractometer), Dilatometer, FE-SEM (Field emission scanning electron microscope), EDS (Energy dispersive spectrometer). NiCuZn ferrite calcined at $700^{\circ}C$ had a good apparent density and initial permeability of magnetic properties. The shrinkage rate of the NCZF700 ferrite and dielectric material was similar. The multilayer revealed dense, uniform morphologies with excellent interface quality. Diffusion of hetero junction such as dielectric and ferrite was not occuring at $900^{\circ}C$.

• 한국표면공학회지
• /
• 제51권4호
• /
• pp.202-206
• /
• 2018

Permalloy($Ni_{80}-Fe_{20}$) which is known for its soft magnetic properties is a well-known material that has been studied intensively. Permalloy nanoflakes were fabricated with the combination of electrodeposition and sonication process. Ultrasonic power was applied to the deposited alloy which produced nanoflakes in forms of sheet. High internal stress created cracks which helped the peeling of permalloy into nanosheets. Because of shape anisotropy, flakes could be aligned by magnetic field. The magnetic properties of the nanosheets were observed, and the variation of magnetic properties with the alignment of flake was also investigated.

• Computers and Concrete
• /
• 제30권2호
• /
• pp.85-97
• /
• 2022

Using a combination of nonlocal Eringen as well as classical beam theories, this research explores the thermal buckling of a bidirectional functionally graded nanobeam. The formulations of the presented problem are acquired by means on conserved energy as well as nonlocal theory. The results are obtained via generalized differential quadrature method (GDQM). The mechanical properties of the generated material vary in both axial and lateral directions, two-dimensional functionally graded material (2D-FGM). In nanostructures, porosity gaps are seen as a flaw. Finally, the information gained is used to the creation of small-scale sensors, providing an outstanding overview of nanostructure production history.