• Title/Summary/Keyword: material behavior model

Search Result 1,588, Processing Time 0.031 seconds

Fracture Simulation of UHPFRC Girder with the Interface Type Model (경계형 모델을 사용한 초고강도 섬유보강 콘크리트거더의 파괴역학적 해석)

  • Guo, Yi-Hong;Han, Sang-Mook
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.23 no.1
    • /
    • pp.81-94
    • /
    • 2010
  • This paper deals with the fracture simulation of UHPFRC girder with the interface type model. Based on the existing numerical simulation of quasi-brittle fracture in normal strength concrete, constitutive modeling for UHPFRC I-girder has been improved by including a tensile hardening at the failure surface. The finite element formulation is based on a triangular unit, constructed from constant strain triangles, with nodes along its sides and neither at the vertex nor the center of the unit. Fracture is simulated through a hardening/softening fracture constitutive law in tension, a softening fracture constitutive law in shear as well as in compression at the boundary nodes, with the material within the triangular unit remaining linear elastic. LCP is used to formulate the path-dependent hardening-softening behavior in non-holonomic rate form and a mathematical programming algorithm is employed to solve the LCP. The piece-wise linear inelastic yielding-failure/failure surface is modeled with two compressive caps, two Mohr-Coulomb failure surfaces, a tensile yielding surface and a tensile failure surface. The comparison between test results and numerical results indicates this method effectively simulates the deformation and failure of specimen.

GEOTECHNICAL DESIGNS OF THE SHIP IMPACT PROTECTION SYSTEM FOR INCHEON BRIDGE

  • Choi, Sung-Min;Oh, Seung-Tak;Park, Sang-Il;Kim, Sung-Hwan
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2010.09c
    • /
    • pp.72-77
    • /
    • 2010
  • The Incheon Bridge, which was opened to the traffic in October 2009, is an 18.4 km long sea-crossing bridge connecting the Incheon International Airport with the expressway networks around the Seoul metropolitan area by way of Songdo District of Incheon City. This bridge is an integration of several special featured bridges and the major part of the bridge consists of cable-stayed spans. This marine cable-stayed bridge has a main span of 800 m wide to cross the vessel navigation channel in and out of the Incheon Port. In waterways where ship collision is anticipated, bridges shall be designed to resist ship impact forces, and/or, adequately protected by ship impact protection (SIP) systems. For the Incheon Bridge, large diameter circular dolphins as SIP were made at 44 locations of the both side of the main span around the piers of the cable-stayed bridge span. This world's largest dolphin-type SIP system protects the bridge against the collision with 100,000 DWT tanker navigating the channel with speed of 10 knots. Diameter of the dolphin is up to 25 m. Vessel collision risk was assessed by probability based analysis with AASHTO Method-II. The annual frequency of bridge collapse through the risk analysis for 71,370 cases of the impact scenario was less than $0.5{\times}10^{-4}$ and satisfies design requirements. The dolphin is the circular sheet pile structure filled with crushed rock and closed at the top with a robust concrete cap. The structural design was performed with numerical analyses of which constitutional model was verified by the physical model experiment using the geo-centrifugal testing equipment. 3D non-linear finite element models were used to analyze the structural response and energy-dissipating capability of dolphins which were deeply embedded in the seabed. The dolphin structure secures external stability and internal stability for ordinary loads such as wave and current pressure. Considering failure mechanism, stability assessment was performed for the strength limit state and service limit state of the dolphins. The friction angle of the crushed stone as a filling material was reduced to $38^{\circ}$ considering the possibility of contracting behavior as the impact.

  • PDF

Nonlinear Flexural Analysis of RC Beam Rehabilitated by Very-Early Strength Latex-Modified Concrete (초속경 라텍스개질 콘크리트로 보강된 RC보의 비선형 휨해석)

  • Choi, Sung-Yong;Yun, Kyong-Ku;Kim, Yong-Bin;Kang, Mun-Sik
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.11 no.11
    • /
    • pp.4635-4642
    • /
    • 2010
  • Latex modification of concrete provides the material with higher flexural strength, as well as high bond strength and reduced water permeability. One of the most advantages of the very early-strength latex-modified concrete (VES-LMC) could be the similar contraction and expansion behaviour to normal concrete substrate, which enable to ensure long-term performance. The purpose of this study was to parametric nonlinear flexural nonlinear analysis of RC beam rehabilitated by VES-LMC. The results were as follows; The flexural nonlinear analysis model of RC beam overlaid by VES-LMC in ABAQUS was proposed to predict the load-deflection response, interfacial stress, and ultimate strength. The proposed FE analysis model was verified by comparison of an experimental data and the FE analysis results. The FE analysis results showed that yield point as well as flexural stiffness increased as the depth increased; the stiffness of beam overall increased as the bond stiffness became larger; the bond strength between two different materials is a key factor in composite beam. A parametric study showed that an overlay thickness was a main influencing factor to the behavior of RC beam overlaid by VES-LMC.

Estimation of Potential Risk and Numerical Simulations of Landslide Disaster based on UAV Photogrammetry (무인 항공사진측량 정보를 기반으로 한 산사태 수치해석 및 위험도 평가)

  • Choi, Jae Hee;Choi, Bong Jin;Kim, Nam Gyun;Lee, Chang Woo;Seo, Jun Pyo;Jun, Byong Hee
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.41 no.6
    • /
    • pp.675-686
    • /
    • 2021
  • This study investigated the ground displacement occurring in a slope below a waste-rock dumping site and estimated the likelihood of a disaster due to a landslide. To start with, photogrammetry was conducted by unmanned aerial vehicles (UAVs) to investigate the size and extent of the ground displacement. From April 2019 to July 2020, the average error rate of the five UAV surveys was 0.011-0.034 m, and an elevation change of 2.97 m occurred due to the movement of the soil layer. Only some areas of the slope showedelevation change, and this was believed to be due to thegroundwater generated during rainfall rather than the effect of the waste-rock load at the top. Sensitivity analysis for LS-RAPID simulation was performed, and the simulation results were compared and analyzed by applying a digital elevation model (DEM) and a digital surface model (DSM)as terrain data with 10 m, 5 m, and 4 m grids. When data with high spatial resolution were used, the extent of the sedimentation of landslide material tended to be excessively expanded in the DEM. In contrast, in the result of applying a DSM, which reflects the topography in detail, the diffusion range was not significantly affected even when the spatial resolution was changed, and the sedimentation behavior according to the river shape could be accurately expressed. As a result, it was concluded that applying a DSM rather than a DEM does not significantly expand the sedimentation range, and results that reflect the site situation well can be obtained.

An accurate analytical model for the buckling analysis of FG-CNT reinforced composite beams resting on an elastic foundation with arbitrary boundary conditions

  • Aicha Remil;Mohamed-Ouejdi Belarbi;Aicha Bessaim;Mohammed Sid Ahmed Houari;Ahmed Bouamoud;Ahmed Amine Daikh;Abderrahmane Mouffoki;Abdelouahed Tounsi;Amin Hamdi;Mohamed A. Eltaher
    • Computers and Concrete
    • /
    • v.31 no.3
    • /
    • pp.267-276
    • /
    • 2023
  • The main purpose of the current research is to develop an efficient two variables trigonometric shear deformation beam theory to investigate the buckling behavior of symmetric and non-symmetric functionally graded carbon nanotubes reinforced composite (FG-CNTRC) beam resting on an elastic foundation with various boundary conditions. The proposed theory obviates the use to shear correction factors as it satisfies the parabolic variation of through-thickness shear stress distribution. The composite beam is made of a polymeric matrix reinforced by aligned and distributed single-walled carbon nanotubes (SWCNTs) with different patterns of reinforcement. The material properties of the FG-CNTRC beam are estimated by using the rule of mixture. The governing equilibrium equations are solved by using new analytical solutions based on the Galerkin method. The robustness and accuracy of the proposed analytical model are demonstrated by comparing its results with those available by other researchers in the existing literature. Moreover, a comprehensive parametric study is presented and discussed in detail to show the effects of CNTs volume fraction, distribution patterns of CNTs, boundary conditions, length-to-thickness ratio, and spring constant factors on the buckling response of FG-CNTRC beam. Some new referential results are reported for the first time, which will serve as a benchmark for future research.

The Effects of Family Structure and Socialization Influences on Compulsive Buying: A Life Course Study in Thailand (가족구조와 사회화가 강박구매에 미치는 영향에 관한 연구: 태국의 인생행로연구를 중심으로)

  • Nguyen, Hung Vu;Moschis, George P.;Shannon, Randall;Gotthelf, Kristian
    • Journal of Global Scholars of Marketing Science
    • /
    • v.19 no.2
    • /
    • pp.27-39
    • /
    • 2009
  • Compulsive consumption is regarded as a global phenomenon that can adversely affect consumer well-being. Although the topic has been studied in different cultural settings, we have seen relatively little theory development and explanations of compulsive behavior Nearly all previous empirical studies attempt to explain this behavior by correlating measures of compulsive behavior with independent variables taken within the same time frame. However, recent developments in social sciences suggest that such a phenomenon may best understood in the context of the person's earlier-in-life experiences. Using the life course paradigm as an overarching framework, the present research extends previous work on this topic. Following hypotheses were drawn from literature review: H1: The earlier in childhood and adolescence a person experiences family dislocation, the greater his or her likelihood of exhibiting compulsive behaviors in adulthood. H2: The earlier in life the young person experienced family dislocation, the greater the number of family disruption events the young person experienced prior entering adulthood years. H3: Family dislocation leads to (a) increased frequency of socio.oriented family communications and (b) decreased frequency of concept-oriented family communication. H4: Young adults who were raised in families characterized by a strong socio-oriented communication structure are more likely to exhibit compulsive consumption tendencies than those who were raised in families characterized by a weak socio-oriented family communication structure. H5: Young adults who were raised in families characterized by a strong concept-oriented communication structure are less likely to exhibit compulsive consumption tendencies than those who were raised in families characterized by a week concept-oriented family communication structure. H6: The relationship between family disruption events experienced during adolescence and perceived stressfulness of these events is moderated by (a) global family support, (b) emotional family support, and (c) material family support. Those reporting higher levels of family support as teenagers are less likely to report experiencing stress due to family disruption events. H7: Perceived stressfulness of family disruption events experienced during adolescent years are associated with compulsive consumption tendencies in early adulthood. H8: The greater the number of family disruption events young adults experienced during their adolescent years the more frequent was their communication about consumption with their peers. H9: The more frequent was the young persons' communication with their peers about consumption during their adolescent years, the more likely they are to report compulsive buying tendencies as young adults. We use a sample of 120 Thai undergraduate students attending classes taught in English as part of a four-year international program. Product-moment correlations, hierarchical regression analysis and partial correlation were used to analyze data. Results of testing hypotheses showed that hypothesis 2, 4, 7 and 9 were supported and hypothesis 1, 3, 5, 6 and 8 were not supported. Our study did not find a significant relationship between the age when a person experienced family dislocation and their compulsive behavior tendencies expressed as young adults. We did not find a significant relationship between family dislocation and family communication structures. But we found a significant positive relationship between socio-oriented communication structure and compulsive buying and a significant relationship between our peer communication and compulsive buying measures. Also we found perceived stressfulness due to the disruptive events to have a significant positive relationship between the perceived stressfulness and compulsive buying. Implications from these findings, limitations of this research and future research suggestions were discussed.

  • PDF

THE EFFECTS OF THERMAL STIMULI TO THE FILLED TOOTH STRUCTURE (온도자극이 충전된 치질에 미치는 영향)

  • Baik, Byeong-Ju;Roh, Yong-Kwan;Lee, Young-Su;Yang, Jeong-Suk;Kim, Jae-Gon
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.26 no.2
    • /
    • pp.339-349
    • /
    • 1999
  • The dental structure substituted by restorative materials may produce discomfort resulting from hot or cold stimuli. To investigate the effects of this stimuli on the human teeth, thermal analysis was carried out by calculation of general heat conduction equation in a modeled tooth using numerical method. The method has been applied to axisymmetric and two-dimensional model, analyzing the effects of constant temperature $4^{\circ}C\;and\;60^{\circ}C$. That thermal shock was provided for 2 seconds and 4 seconds, respectively and recovered to normal condition of $20^{\circ}C$ until 10 seconds. The thermal behavior of tooth covered with a crown of gold or stainless steel was compared with that of tooth without crown. At the same time, the effects of restorative materials(amalgam, gold and zinc oxide-eugenol(ZOE)) on the temperature of PDJ(pulpo-dentinal junction) has been studied. The geometry used for thermal analysis so far has been limited to two-dimensional as well as axisymmetric tooth models. But the general restorative tooth forms a cross shaped cavity which is no longer two-dimensional and axisymmetric. Therefore, in this study, the three-dimensional model was developed to investigate the effect of shape and size of cavity. This three-dimensional model might be used for further research to investigate the effects of restorative materials and cavity design on the thermal behavior of the real shaped tooth. The results were as follows; 1. When cold temperature of $4^{\circ}C$ was applied to the surface of the restored teeth with amalgam for 2 seconds and recovered to ambient temperature of $20^{\circ}C$, the PDJ temperature decreased rapidly to $29^{\circ}C$ until 3 seconds and reached to $25^{\circ}C$ after 9 seconds. This temperature decreased rather slowly with stainless steel crown, but kept similar temperature within $1^{\circ}C$ differences. Using the gold as a restorative material, the PDJ temperature decreased very fast due to the high thermal conductivity and reached near to $25^{\circ}C$ but the temperature after 9 seconds was similar to that in the teeth without crown. The effects of coldness could be attenuated with the ZOE situated under the cavity. The low thermal conductivity caused a delay in temperature decrease and keeps $4^{\circ}C$ higher than the temperature of other conditions after 9 seconds. 2. The elapse time of cold stimuli was increased also until 4 seconds and recovered to $20^{\circ}C$ after 4 seconds to 9 seconds. The temperature after 9 seconds was about $2-3^{\circ}C$ lower than the temperature of 2 seconds stimuli, but in case of gold restoration, the high thermal conductivity of gold caused the minimum temperature of $21^{\circ}C$ after 5 seconds and got warm to $23^{\circ}C$ after 9 seconds. 3. The effects of hot stimuli was also investigated with the temperature of $60^{\circ}C$. For 2 seconds stimuli, the temperature increased to $40^{\circ}C$ from the initial temperature of $35^{\circ}C$ after 3 seconds of stimuli and decreased to $30^{\circ}C$ after 9 seconds in the teeth without crown. This temperature was sensitive to surface temperature in the teeth with gold restoration. It increased rapidly to $41^{\circ}C$ from the initial temperature of $35^{\circ}C$ after 2 seconds and decreased to $28^{\circ}C$ after 9 seconds, which showed $13^{\circ}C$ temperature variations for 9 seconds upon the surface temperature. This temperature variations were only in the range of $5^{\circ}C$ by using ZOE in the bottom of cavity and showed maximum temperature of $37^{\circ}C$ after 3 seconds of stimuli.

  • PDF

The Effect of Curiosity and Need for Uniqueness on Emotional Responses to Art Collaborated Products including Moderating Effect of Gender (독특성 추구성향과 호기심이 아트 콜라보레이션 제품에 대한 소비자의 감정에 미치는 영향: 성별에 따른 조절효과)

  • Ju, Seon Hee;Koo, Dong-Mo
    • Asia Marketing Journal
    • /
    • v.14 no.2
    • /
    • pp.97-125
    • /
    • 2012
  • Companies recently introduce art collaborated products incorporating culture into a product. Art collaborated products include incorporating famous movies and/or design of an artist into a newly launched product. The introduction of art collaborated products are gradually increasing. However, research for this trend is relatively scarce. Although research concerning design has discussed a number of different factors as playing a role in influencing responses to design including culture, fashion, innate preferences, etc.), only limited attention has been paid to the processes by which consumers generate responses to product designs. People with different characteristics may respond differently. When people encounter these art products, they may become curious, may think that these products are unique, novel and innovative. People tend to show different levels of curiosity when they encounter new and novel objects, which they have rarely seen or experienced. Curiosity is defined as a desire for acquiring new knowledge and new sensory experience. Previous studies demonstrated that curiosity motivates individuals to engage in exploratory behaviors. People also show different levels of need for uniqueness, which is defined as being different from others or becoming distinctive among a larger group. Individual's need for uniqueness results from signals conveyed by the material objects that individuals choose to display. Recently, researcher have developed the need for uniqueness with three distinct constructs. These three concepts include creative choice, unpopular choice, and avoidance of similarity. Creative choice is a trait tendency of an individual by expressing or differentiating himself from others through consumptions of unique products. Unpopular choice is related to an individual's tendency to consume products, which deviates from group norms. Avoidance of similarity is linked to the avoidance of consumption behavior of products that are not famous. Past research implies that people with different levels of need for uniqueness show different motivational processes. Previous research also demonstrates that different customer emotions may be derived when consumers are exposed to these art collaborated products. Research tradition has been investigated three different emotional responses such as pleasure, arousal, and dominance. Pleasure is defined as the degree to which a person feels good, joyful, happy, or satisfied in a situation. Arousal is defined as the extent to which a person feels stimulated, active, or excited. Dominance is defined as the extent that a person feels powerful vis-a-vis the environment that surrounds him/her. Previous research show that complex, speedy, and surprising stimuli may excite consumers and thus make them more pleased and engaged in their approach behavior. However, the current study identified these emotional responses as positive emotion, negative emotion, and arousal. These derived emotions may lead consumers to approach and/or avoidance behaviors. In addition, males and females tend to respond differently when they are exposed to art collaboration products. Building on this research tradition, the current study aims to investigate the inter-relationships between individual traits such as curiosity and need for uniqueness and individual's emotional responses including positive and negative emotion and arousal when people encounter various art collaborated products. Emotional responses are proposed to influence purchase intention. Additionally, previous studies show that male and females respond differently to similar stimuli. Accordingly, gender difference are proposed to moderate the links between individual traits and emotional responses. These research aims of the current study may contribute to extending our knowledge in terms of (1) which individual characteristics are related to different emotions, and (2) how these different emotional responses inter-connected to future purchase intention of arts collaborated products. In addition, (3) the different responses to these arts collaborated products by males and females will guide managers how to concoct different strategies to these segments. The questionnaire for the present study was adopted from the previous literature and validated with a pilot test. The survey was conducted in Daegu, a third largest city in South Korea, for three weeks during June and July 2011. Most respondents were in their twenties and thirties. 350 questionnaires were distributed and among them 300 were proved to be valid (valid response rate of 85.7%). Survey questionnaires from valid 300 respondents are used to test hypotheses proposed. The structural equation model (SEM) was used to validate the research model. The measurement and structural model was tested using LISREL 8.7. The measurement model test demonstrated that consistency, convergent validity, and discriminat validity of the measurement items were acceptable. The results from the structural model demonstrate that curiosity has a positive impact on positive emotion, but not on negative emotion and arousal. Need for uniqueness has three different sub-concepts such as creative choice, unpopular choice, and avoidance of similarity. The results show that creative choice has a positive effect on arousal and positive emotion, but has a negative impact on negative emotion. Unpopular choice has a positive effect on arousal, but on neither positive nor negative emotions. Avoidance of similarity has no impact on neither emotions nor arousal. The results also demonstrated that gender has a moderating influence. Males show more negative emotion to creative and unpopular choices. Implications and future research directions are discussed in conclusion.

  • PDF

Seismic response characteristics of the hypothetical subsea tunnel in the fault zone with various material properties (다양한 물성의 단층대를 통과하는 가상해저터널의 지진 시 응답 특성)

  • Jang, Dong In;Kwak, Chang-Won;Park, Inn-Joon;Kim, Chang-Yong
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.20 no.6
    • /
    • pp.1061-1071
    • /
    • 2018
  • A subsea tunnel, being a super-sized underground structure must ensure safety at the time of earthquake, as well as at ordinary times. At the time of earthquake, in particular, of a subsea tunnel, a variety of response behaviors are induced owing to relative rigidity to the surrounding ground, or difference of displacement, so that the behavior characteristics can be hardly anticipated. The investigation aims to understand the behavior characteristics switched by earthquake of an imaginary subsea tunnel which passes through a fault zone having different physical properties from those of the surrounding ground. In order to achieve the aim, dynamic response behaviors of a subsea tunnel which passes through a fault zone were observed by means of indoor experiments. For the sake of improved earthquake resistance, a shape of subsea tunnel to which flexible segments have been applied was considered. Afterward, it is believed that a D/B can be established through 3-dimensional earthquake resistance interpretation of various grounds, on the basis of verified results from the experiments and interpretations under various conditions. The present investigation performed 1 g shaking table test in order to verify the result of 3-dimensional earthquake resistance interpretation. A model considering the similitude (1:100) of a scale-down model test was manufactured, and tests for three (3) Cases were carried out. Incident seismic wave was introduced by artificial seismic wave having both long-period and short-period earthquake properties in the horizontal direction which is rectangular to the processing direction of the tunnel, so that a fault zone was modeled. For numerical analysis, elastic modulus of the fault zone was assumed 1/5 value of the modulus of individual grounds surround the tunnel, in order to simulate a fault zone. Resultantly, reduced acceleration was confirmed with increase of physical properties of the fault zone, and the result from the shaking table test showed the same tendency as the result from 3-dimensional interpretation.

A Proposal on a Management Model Applicable to Visiting Nursing Program for a Low-income Group (저소득층 방문간호 관리를 위한 제안 - 강북구 방문간호 대상자를 중심으로-)

  • Ko Mee-Ja
    • Journal of Korean Public Health Nursing
    • /
    • v.10 no.1
    • /
    • pp.118-138
    • /
    • 1996
  • Because of accelerated urbanization public body visiting nursing project that started according as matter of health on urban class in the lower brackets of income was concentrated on Social interests has a unsatisfied points to propel project efficiently from the lack of rating materials. Therefore centering around written contents in documentary literature of citizen health by household in five years from starting year of project to now. visiting frequency by medical manpower was evaluated quantitatively and qualitatively in aspect of management hereupon. for the sake of giving a basic materials for public health project of this field. This research presents documentary literature of citizen health which become materials is that as one person's charged region of nurse in duty scale. district is Kang-Buck Gu. the object is resident in the lower brackets of income grounded livelihood protection law and who is admitted by the head of organ~chief of health care). and the number of material centering around the head of a household is 415 copy. The result of research is summarized. as follow. 1. Average visiting frequency examinated by medical manpower show difference according to valuables of supervision characteristics namely average visiting. Frequency of nurse has long term residence in case registration season is early and supervision season is the first year and is high incase a kind of house is unlicdnsed mountain town. Average visiting frequency with doctor is high incase supervision season is the first year and the medical insurance system is admitted by chief of health care. That shows that a man of discomfort behavior left alone are yet many in local society. The meaning of this result shows that the continuity of official relation about class in the lowest brackets of income of long term residence goes well between househole who is a user of visiting nursing service of the object according to midway income under management influences a given duty of nurse s and so causes quantitative decrease. 2. In case behavier and condition of health that nurse diagnoses are bad. as the type matter is a lack of health and the number of patient is large. the average visiting frequency of nurse is high. because average visiting frequency with doctor is high as the condition of health is bad and the number of patient is large. That is similar with that of nurse. CD Average visiting frequency of nurse s seen by matter of disease is very high only in apoplexy by 39.50 and is confined within limits from 7.63 to 11.36 in other disease. But average visiting frequency with doctor is double as many as that of nurse but defined in apoplexy hypertension and articulate. (1) Average visiting frequency of nurse by existence in inoculation of hepatitis is low by 6.73 in unidentified group and very high by 26.89 in group of non-inoculation and the case of the antigenic positive man of B type hepatitis or epileptic who can't be inoculated shows 13.00 and that even family nursing service is needed to them. That result shows that though one person nurse of local charge has a large scale of duty. as visting nursing service is given a class who has a large demand preferentially by respectively accurate nursing diagnosis. the number of diagnosis service is similar with it. 3. During five years. average visiting frequency of nurse is 10.84 and average visiting frequency with doctor is 76.50 seeing from the official scale of nurse. visiting by household is performed two more per year to the average. Seeing this by type of service. average visiting frequency of nurse is higher in indirectly nursing than in directly nursing and that suggests that at the time of visiting household nurse performs education of protection lively save patient but at the time of contrastedly visiting with doctor. directly nursing is more contents of service show no difference by man power and medication dressing by demand is 14.3 and 18.6 the aid of hardship term of doctor and nurse is high by 18.7 and 17.00 in the request of hospitalization when seeing by demands. 4. Action by turns exemplified 1994 is well in sequence of 2/4 turn. 3/4 turn. 1/4 turn. 4/4 turn. When seen by average visiting frequency of nurse but gradually is even. Without difference by turns. average visiting frequency of doctor is much higher in 1/4 turn than other turns. Type of service by turns is all even but directly nursing is inactive in 4/4 and indirectly nursing. Very increases in 4/4 and so. Nurse's quantity of duty is plentiful that shows that by evaluation of last turn and plan of project. Contents of service follows that medication and dressing is the highest by' 5.57 in 1/4turn. goes down gradually by turn. becomes 3.57 in 3/4 turn. and increases again by 4.83 in 4/4 turn. the rest service is higher in 2/4 turn than other turns. 5. Total visiting frequency of nurse is explained to total $37.5\%$ by six valuables of visiting frequency of doctor. nursing demand. demand of diagnosis. condition of behavior. year. Special terms and magnitude of influential power is the same as sequence of enumerated valuables. Namely. the higher the visiting frequency of doctor. the bigger nursing and demand of diagnosis is. the worse the condition of behavior is. the older the object is and the more the household of special terms is. the high total visiting frequency of nurse is.

  • PDF