• Culinary science and hospitality research
• /
• v.23 no.7
• /
• pp.42-49
• /
• 2017

This study was conducted to determine the nutritional value of domestic cherry tomato varieties (Summerking, Qutiquti, and Minichal). The levels of amino acids, amino acid derivatives, and ${\gamma}-aminobutyric-acid$ (GABA) were analyzed using ion chromatography. In domestic cherry tomatoes, eighteen free amino acids were found including L-glutamic acid (L-Glu), L-glutamine (L-Gln), and L-aspartic acid (L-Asp). L-Glu was the most abundant amino acid, ranging from 1,533.17 mg/100 g to 1,920.65 mg/100 g (dry weight). The next abundant amino acids were L-Gln, ranging from 784.68 mg/100 g to 1,164.36 mg/100 g and L-Asp, ranging from 320.73 mg/100 g to 387.22 mg/100 g. Domestic cherry tomatoes contained eight essential amino acids except tryptophan and the total essential amino acid content was 297.30~432.43 mg/100 g (dry weight), which was 8.92~10.61% of total free amino acid. Several amino acid derivatives were found: L-carnitine (L-Car), hydroxylysine (Hyl), o-phosphoethanolamine (o-Pea), phosphoserine (p-Ser), ${\beta}-alanine$ (${\beta}-Ala$), N-methyl-histidine (Me-His), ethanolamine ($EtNH_2$), and L-citrulline (L-Cit). L-Car, transporting long-chain fatty acid into mitocondrial matrix, was the most abundant amino acid derivative in all domestic cherry tomatoes. A high level of GABA (313.18~638.57 mg/100 g), known as a neurotransmitter, was also found in all three domestic cherry tomatoes. These results revealed that domestic cherry tomatoes have a good balance of nutrient and bioactive compounds. Therefore, cherry tomatoes can be used as a functional food material.

• Journal of Magnetics
• /
• v.16 no.3
• /
• pp.229-233
• /
• 2011

Phase evolution during the hydrogen-assisted disproportionation of $Nd_{12.5}Fe_{80.6}B_{6.4}Ga_{0.3}Nb_{0.2}$ alloy was investigated mainly by using a magnetic balance-type thermomagnetic analyser (TMA). In order to avoid any undesirable phase change in the course of heating for TMA, a swift TMA technique with very high heating rate (around 2 min to reach $800^{\circ}C$ from room temperature) was adopted. The hydrided $Nd_{12.5}Fe_{80.6}B_{6.4}Ga_{0.3}Nb_{0.2}$ alloy started to be disproportionated in hydrogen from around $600^{\circ}C$, and the alloy after the early disproportionation (from 600 to $660^{\circ}C$) has been partially disproportionated. The partially disproportionated alloy consisted of a mixture of $NdH_x$, $Fe_3B$, ${\alpha}$-Fe, and the remaining undisproportionated $Nd_2Fe_{14}BH_x$-phase. During the subsequent heating to $800^{\circ}C$ in hydrogen, two additional phases of $Fe_{23}B_6$ and $Fe_2B$ were formed, and the material consisted of a mixture of $NdH_x$, $Fe_{23}B_6$, $Fe_3B$, $Fe_2B$, and ${\alpha}$-Fe phases. During the subsequent isothermal holding at $800^{\circ}C$ for 1 hour, the phase constitution was further changed, and one additional unknown magnetic phase was formed. Eventually, the fully disproportionated $Nd_{12.5}Fe_{80.6}B_{6.4}Ga_{0.3}Nb_{0.2}$ alloy consisted of $NdH_x$, $Fe_{23}B_6$, $Fe_3B$, $Fe_2B$, ${\alpha}$-Fe, and one additional unknown magnetic phase.

• Journal of Plant Biology
• /
• v.17 no.2
• /
• pp.53-62
• /
• 1974

A study was made on the primary production of Lake Changjamot during the spring season of 1973 by menas of the oxygen method. The stratification of temperature and dissolved oxygen were formed in May with the stratified structure of phytoplankton. The range of Secchi disc transparency was from 0.8m to 2.3m during the nine months of this investigation, which was begun in January, 1973. The value was lowest in early June when the phytoplankton blooming reached the peak. The concentration of PO4-P, NH3-N, NO3-N and NO3-N was reduced at the beginning of the phytoplankton blooming and increased again after May except PO4-P. It might have been caused by the inflow of the nitogenous fertilizer from the surrounding agricultural area since May when farming was started. The total amount of chlorophyll-a in the entire water column varied from 25mg/$m^2$ to 277mg/$m^2$ from January till September with the maximum value occurring in early June. These values show a considerable eutrophication of the in comparison with the data obtained in 1969. The daily gross production in the lake varied from a low of 655mgC/$m^2$ to a high of 2,859 mgC/$m^2$ during the spring season and this corresponds to the variation of the amount of chlorophyll. The total amount of daily respiration varied from 650mg C/$m^2$ in winter to 2,307 mg C/$m^2$ in late spring and exceeds gross primary production especially in late May showing the negative balance of daily production and consumption of organic material at that time. In conclusion, Lake Changjamot is a fairly productive and a moderately autotrophic lake and has been eutrophicated much during the past four years.

• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.2
• /
• pp.1-8
• /
• 2000

Manual material handling(MMH)is major factor which causing physical injuries of worker at working area and frequency of low back pain(LBP) is increasing industrial accidents. Especially, working in bad circumstance such as farm, orchard, harbor loading and unloading, logging place and mining place which located in inclined slope can cause much possibility of hazard and absence of working balance can cause injuries of musculoskeletal system such as joint, bone, ligament. So, this study used EMG system to measure and evaluate muscle force information and fatigue of worker when lifting on slope. The result of measuring averaged integrated EMG(AEMG) shows multifidus muscle be used more than anything else in force. neck extensors are used at 15°, 20°frequently. generally the AEMG result shows multifidus muscle be used in force. Commonly, muscle fatigue of multifidus is higher than other muscle by analysis mean power frequency(MPF). The result of load sharing rate shows multifidus and erectorspinae which are deep spinal muscles is relatively high and neck extensor is low.

• Journal of Life Science
• /
• v.27 no.9
• /
• pp.1059-1063
• /
• 2017

Angiogenesis is an essential step in tumoral growth and metastasis and is regulated by a balance between stimulators and inhibitors. Recently, antiangiogenic target therapy has shown promise as a new type of chemotherapy. Natural products have attracted widespread attention worldwide as a useful source of novel therapeutic compounds. The balloon-flower has long been used as a traditional medicinal material and food in Asia. In this study, we investigated whether extract of balloon-flower would inhibit in vitro angiogenesis and vascular-like network formation in human umbilical vein endothelial cells (HUVECs). The extract of Balloon-flower did not affect the viability of HUVECs. However, treatment with the Balloon-flower extract suppressed tube formation of HUVECs. In addition, after treatment with the Balloon-flower extract, cell migration decreased about 80%, and cell invasion was almost completely inhibited. Taken together, these results suggest that extract of Balloon-flower may have potential as an angiogenic inhibitor and that it could be developed as an anticancer agent.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.5
• /
• pp.261-269
• /
• 2002

The objectives of this paper are to study the use of geotextile tribes for dewatering high water content sludges and sediments and to evaluate their feasibility and affecting fsctors. To accomplish these objectives, pressure filtration tests were conducted on woven geotextile (Geotex$\circledR$ 46T and 1212T) fir high water content materials with a modified experimental apparatus. Test results indicate that 1) the filter cake formed on the inside of the geotextile tube is the major contributor to the retention of fine particles, but also causes a decrease in permeability, 2) controlling the formation of the filter cake and thus achieving a balance between soil retention and permeability is vital to a successful project, and 3) geotextiles, sludge properties, and filtration pressures have some effects on the dewatering efficiency and dewatering rate.

• Journal of Technologic Dentistry
• /
• v.16 no.1
• /
• pp.78-104
• /
• 1994

Under the fee for service schedule of Korean health insurance system, rational fee for dental laboratory products based on the cost is required to be formulated. The purpose of this study was to find actual cost of dental laboratory products in case of a University Hospital. Materials of this study were used as follows : 1. Balance sheet at Dec. 31, 1992 and profit and loss report of the year 1992 of the sample hospital 2. Performance report of dental laboratory department. 3. Purchasing and other accounting bills of dental laboratory materials. The following methods were used. 1. Actual cost finding of dental laboratory department was performed. 2. Work sampling methods were used for measuring standard working time by the process of working. 3. To porcelain fused to metal crown(non-precious), Relative value of the cost of dental laboratory products was calculated as 1.00. 4. Fee and cost of those products were compared on the basis of Relative values. The results of the study can be summarized as follow : 1. Overall, it took longs time than other items. to product denture-related items. 2. When several teeth are made in a time, average production time is much sorter than when one tooth is made in a time. 3. The relative price cost of Dicor cast crown and denture related items are higher than the criterion items. 4. The material cost occupies average 11% out of the total price cost, proportion of personnel expenses is average as 60.0%. 5. Some of the components consisting of the price cost are not reflected adequately in setting the level of the reimbursement price. 6. Relative values of dental laboratory products price cost are varied in the range from 0.05 to 2.83, overall, the reimbursement price of dental products appears not to reflect adequately the price cost. On the basis of this study results, the following ideas would be suggested : 1. Fee Schedule of dental laboratory products should be renovated in order to reflect their costs. 2. Dental laboratory product manufacturers should be enlarged for the economy of scale which may be useful for cost- containment. 3. Dental laboratory producters themselves are required to be standardiqed according to the categories of skill.

• The Journal of the Korean dental association
• /
• v.55 no.9
• /
• pp.617-624
• /
• 2017

Objective: To compare the electromyographic activity of masseter and temporal muscles between bruxers and nonbruxers in adult and adolescent patients. Material and Methods: The samples composed of the surface electromyography (EMG) recordings obtained from the orthodontic patients. Sixty-eight patients who had bruxsim habit (43 female and 25 male) were divided into four groups according to their age and gender. Control groups consisted of 79 patients who had not bruxism habit. EMG of the masseter muscle and anterior temporal muscle were recorded before treatment in clenching at maximum intercuspation. The ratio of temporal and masseter muscle activity (T/M ratio) was compared between bruxers and nonbruxers in adult and adolescent patients. Results: EMG of masseter muscle and temporal muscle were significantly higher in adult male bruxism group than control. T/M ratio in adult male bruxism group was significantly lower than in adult male nonbruxism group. However, there was no significant difference in T/M ratio between adolescent bruxism group and adolescent nonbruxism group. Conclusions: The balance in the activity of the masseter and temporal muscles may not differ between bruxers and nonbruxers during adolescent periods. However, in adult period, the masseter muscle activity against temporal muscle is greater in males with bruxism habit compared to non-bruxer.

• Journal of Pharmacopuncture
• /
• v.12 no.1
• /
• pp.43-51
• /
• 2009

Objective : The purpose of this study is to present the standard for practical application of ginger herbal pharmacopuncture Material and Methods : We refer to ancient literatures and the recent papers for ginger. Conclusions : The following results have been obtained 1. The effect of ginger(Zingiber officinale Roscoe) is to "release exterior", "balance nutrient & defensive qi", "resolve phlegm", "arrest coughing", "warm the lungs". So ginger herbal pharmacopuncture can be applied to treating fever, chilling sign, headchae, snuffle and gasping cough due to cold affection and treating the symptoms like sputum and asthma that be revealed by pulmonary disease. 2. The effect of ginger is to "warm spleen and stomach", "arrest vomiting" "promote normal flow of water". So ginger herbal pharmacopuncture can be applied to treating nausea, vomiting, abdominal distension and diarrhea due to phlegm & dampness and treating edema. 3. The effect of ginger is to eliminate blood stasis. So ginger herbal pharmacopuncture can be applied to treating contusion, blood stasis, sprain and gynecologic disease. 4. Ginger can treat myalgia and pain due to wind-damp and have anti-inflammatory effect in pharmacology. So ginger herbal pharmacopuncture can be applied to treating disease of joint, ligament and muscle. 5. Ginger can resolve phlegm and resuscitate. So ginger herbal pharmacopuncture can be applied to treating unconsciousness. But, treating incipient cardiovascular accident, it needs to call your special attention to the danger of blood pressure increase. 6. In pharmacology, ginger is effective for antitumor, antioxidant effects and activating immunocyte. So ginger herbal pharmacopuncture can be applied to treating broadly varieties of tumor and allergic disease.

• Environmental Analysis Health and Toxicology
• /
• v.23 no.4
• /
• pp.257-265
• /
• 2008

Nanotechnology is emerging as one of the key technologies of the 21 st century and is expected to enable one to broaden the applicability across a wide range of sectors that can benefit public and improve industrial competitiveness. Already, consumer products containing nanomaterials are available in markets including coatings, computers, clothing, cosmetics, sports equipment and medical devices. Recently, Institute of Occupational Medicine in UK reported an occupational hygiene review for nanoparticles in the viewpoint of nanotoxicity. They reported that the exposure control is very important issues in workplace for exposure assessment, but no proper methods are available to measure the extent of exposures to nanoparticles in the workplace. Therefore, for the estimation of exposure of nanomaterials, we have to approach the material-balance methodology, which similarly carried out in TRI (toxic release inventory) for hazardous chemicals. In order to use this methodology, the exposure source of nanomaterials should be determined firstly. Therefore, herein we investigated the main sources and processes for the exposure to nanomaterals by conducting the survey. The results could be used to define and assess nanohazard sources.