• 대한치과보철학회지
• /
• 제42권2호
• /
• pp.154-166
• /
• 2004

Statement of problem: In distal extension removable partial denture, the preservation of health of abutment teeth are very important, but they are always subjected to unfavorable stress. Purpose: The purpose of this study was performed to investigate the effects of abutment splinting and design of direct retainer on the stress distribution of abutments in unilateral distal extension removable partial dentures. Material and method: Abutments were splinted by different method. In group 1, autment teeth were not splinted, in group 2, canine and 1st premolar were splinted, and in group 3, canine, 1st and 2nd premolars were all splinted. Three different types of direct retainer such as Akers clasp, RPI clasp, and wrought wire clasp were designed. Strain was measured with Switch & Balance Unit(SB-10, Measurement Group Instruments Division, Raleigh USA) and Strain Indicator(P-3500, Measurement Group Instruments Division, Raleigh, USA) 15kg of vertical and oblique loads was applied at central fossa of missing 2nd molar area. Results : The strain on lingual side of 2nd premolar was the greatest, and abutment splinting induced decrease of strain on buccolingual side of 2nd premolar. The strain of loaded area was decreased by abutment splinting and there was no statistical difference of strain between Group2 and Group 3, and strain on 2nd premolar in wrought wire clasp was the least. Conclusion: Within the limitations of this study, splinting of two distal abutment teeth is enough for stress distribution widely, and wrought wire clasp was more benefitable than others.

• 대한치과보철학회지
• /
• 제41권5호
• /
• pp.551-564
• /
• 2003

Statement of problem : Magnesium oxide may increase pH of alginate, and supply magnesium ions to the polymerization reaction of alginate. Purpose : This study was designed to evaluate the influence of incorporation of magnesium oxide to alginate composition. Material and Method : Seven kinds of experimental alginates were prepared and used for the experiments. Components with unchanging concentrations were sodium alginate 15%, calcium sulfate 14%, sodium phosphate 2%, and zinc fluoride 3%. Contents of magnesium oxide were varied as 0%, 1%, 2%, 3%, 4%, 5%, 6%. Diatomaceous earth were added to each experimental groups as balance to be 100%. Control group was a MgO 0% group. Working time, setting time, elastic recovery strain in compression, compressive strength and tear resistance were measured were measured. Sample size for each groups were 10. Arithmetic means were used as each groups representative values. Regression test between MgO contents and results, Duncan's multiple range test, and One-way ANOVA test were done between groups at level of 0.05. Results : 1 Magnesium oxide made the working time and setting time as longer(p<0.0001). 2 Magnesium oxide did not alter the elastic recovery(p>0.05). 3. Magnesium oxide contents between 2% and 4% exhibited the lowest strain in compression on alginates(p<0.0001). 4. Magnesium oxide made the compressive strength and the tear resistance stronger(p<0.0001). Conclusion : These results mean that setting time of alginate maybe controlled and that mechanical properties maybe improved by the incorporation of magnesium oxide into alginate, without any reduction of elasticity.

• 한국생산제조학회지
• /
• 제6권4호
• /
• pp.72-79
• /
• 1997

A study is a experiment which is figure out to optimum discharge cutting condition of the surface roughness, electronic discharging speed and electrode wear ration with Ton , Toff and V(voltage) as an input condition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.

• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.85-91
• /
• 2013

The machinability of wear-resistible tungsten carbides and the tool wear behavior in machining of V30 and V50 tungsten carbides using PCD (Poly Crystalline Diamond) cutting tool was investigated to understand machining characteristics. This material is one of the difficult-to-cut materials in present, but their usage has been already broadened to every commercial applications such as mining tools, and impact resistant tools etc. Summary of the results are as follows. (1) Tool wear progression of PCD tools in turning of wear-resistible tungsten carbides were observed specially fast in primary cutting distance within 10m. (2) Three components of cutting resistance in this research were different in balance from the ordinary cutting such as that cutting of steel or cast iron. Those were expressed large value by order of thrust force, principal force, feed force. (3) If presume from viewpoint of high efficient cutting within this research, a proper cutting speed was 15m/min and a proper feed rate was 0.1mm/rev. In this case, it was found that the tool life of PCD tool was cutting distance until 230m approximately. (4) In cutting of wear-resistible tungsten carbides such as V30 and V50, it was recognized that the tool wear rate of V30 was very fast as compared with V50. (5) When the depth of cut was 0.1mm, there was no influence of the feed rate on the feed force. And the feed force tended to decrease as the cutting distance was long, because the tool was worn and the tool edge retreated. (6) It was observed that the tungsten carbides were adhered to the flank.

• 한국환경농학회지
• /
• 제33권4호
• /
• pp.381-387
• /
• 2014

BACKGROUND: Garlic (Allium sativum) extract has been allowed as commercial biopesticide material for pesticidal activity in the Environmentally-friendly Agriculture Promotion Act. Nine commercial biopesticides containing A. sativum extract have been marketed in Korea. However, the analytical method of the active substances in these materials has not been studied. METHODS AND RESULTS: Cartridge clean-up method for the determination of dimethyl disulfide(DMDS), diallyl disulfide(DADS), and diallyl trisulfide(DATS) in biopesticides containing A. sativum extract was developed and validated by gas chromatography(GC). The clean-up method was optimized using hydrophilic lipophilic balance (HLB) solid phase extraction(SPE) cartridges for the bioactive sulfides in biopesticides containing A. sativum extract, and the eluate was analyzed to quantify the DMDS, DADS, and DATS using the GC. The developed method was validated, and the LOQ and recovery rates of DMDS, DADS, and DATS were 0.226, 0.063, and $0.051mg\;L^{-1}$ and 80.6, 84.8, and 73.1%, respectively. From the nine commercial biopesticide samples, contents of DMDS, DADS, and DATS were analyzed using the developed method and results showed $2.3mg\;L^{-1}$, respectively. CONCLUSION: The developed method could be used in determining the quality of biopesticides for the manufacture of commercial biopesticides containing A. sativum extract.

• 자원환경지질
• /
• 제45권2호
• /
• pp.195-204
• /
• 2012

미생물에 의한 광물합성은 지화학적 순환 및 미생물의 독성에 대한 저항기작을 위해 주로 연구되어져 왔으나 본 논문에서는 NanoFermentation을 통한 경제적, 친환경적, 저에너지, 대량생산이 가능한 나노입자 크기의 자철석 합성연구를 소개하고 또한 초상자성(Superparamagnetism)과 준강자성(Ferrimagnetism)을 결정짓는 입자크기에 대한 조절인자를 살펴보고자 한다. NanoFermentation을 통한 자철석의 합성 시 입자 크기의 조절 인자는 선택된 미생물 종 및 배양 온도, 배양액의 화학적 조성, 배양기간, 치환된 원소의 조성 및 함량, 자철석 전조물질(Precursor)의 형태, 반응 부피의 증가 및 자철석 전조물질의 농도와 같은 조건들의 조합에 의해 결정되어지며 주로 핵형성 및 결정 성장의 균형에 의해 조절된다. 생광물화 작용을 통한 무기재료의 합성 연구는 앞서 언급한 지표에서의 원소의 순환 및 미생물 생리학적 측면뿐만 아니라 최종 산물인 나노입자의 대량 생산을 통해 재료학적 응용 분야에도 많은 파급 효과가 예상된다.

• Journal of Dairy Science and Biotechnology
• /
• 제35권3호
• /
• pp.184-195
• /
• 2017

This study was carried out to investigate the micro-agribusiness realities of dairy farms by surveying both farmers' opinions and consumers' recognition of dairy farm products for in a value-chain analysis. In most cases, dairy farms produced fermented milk for sales and to prepare cheese both for sales and for providing the necessary material for farm visitors. Value-chain analysis did not seem to be a viable strategy for dairy farmers, except when assessing the quality of farmstead milk products in comparisons of dairy farm milks and commercial milk products. Consumers had a wide range of experience with milk products and had no willingness to buy products from dairy farms because of the high cost and the lack of product diversity. Our findings established three strategies for improving the economic feasibility of dairy farms. First, the price should be reduced by adopting a production balance to establish a farm-gate price, i.e., not as quota milk but as surplus milk. Second, consumers should be educated on the prescription of cheese at home. Third, a value-chain based on cooperative partnerships should be established among dairy farms. In addition, to improve the consumers' satisfaction on the diversity and quality of farm dairy products, developments of new value-added milk products made from the milk of cows allowed to graze on mountain pastures are needed.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권6호
• /
• pp.73-84
• /
• 2015

Nine plant species were selected through vegetation survey at three military shooting ranges at northern Gyeonggi Province. Plants were germinated in normal soil and three seedlings were transplanted to a bottom sealed pot containing sandy loam soils contaminated with either RDX (291 mg/kg) or TNT (207 mg/kg). Planted, blank (without plant), and control (without explosive compound) pots were grown in triplicate at a green house for 134 days. During cultivation, transplanted plants exhibited chlorosis and necrosis in flower and leaf by explosive toxicity and stress. Only three plants, Wild soybean, Amur silver grass, Reed canary grass, survived in TNT treated pot, while seven plant species except for field penny cress and jimson weed, thrived in RDX treated pot. Appreciable amount of TNT (61.6~241.2 mg/g-D.W.) was detected only in plant roots. Up to 763.3 mg/g-D.W. along with 4-amino-2,6-dinitrotoluene, an intermediate of TNT, accumulated in the root of wild soybean. In addition, azoxy compounds, abiotic intermediates of TNT, were detected in TNT treated soils. RDX absorbed average 1,839.95 mg/kg in shoot and 204.83 mg/kg in root. Most of TNT in plant was accumulated in underground part whereas RDX was localized in aerial part. Material balance calculation showed that more than 95% of the initial TNT was removed in the planted pots whereas only 60% was removed in the blank pot. The amount of RDX removed from soil was in the order of Amur Silver Grass (51%) > Chickweed (43%) > Evening primrose (38%). Based on the results of pot cultures, Amur silver grass and Reed canary grass are selected as tolerant remedial plants for explosive toxicity.

• 한국패션뷰티학회지
• /
• 제4권4호
• /
• pp.63-74
• /
• 2006

The purpose of the study was to investigate unique field of formative characteristics using copper wire, the present thesis aims at developing concept of hair art as a creative way, and recognizing the formative characteristics of copper wire as analyze and arrange the concept of hair art, formative, a way of practical application, material aspect, through literature, academic journals, photo data, and researched about prior piece, for example, architecture and costume with hair art, and then pieces of hair art were made. Influenced by the theory, applied the social phenomenon and the formative principles, produced the seven pieces which includes flying, composure, yahoo, harmony, balance, way, spring etc. The results of this research are outlined below. Firstly, It showed that the copper wire can express the mysterious and beautiful formative world, and it could know the possibility of design. Secondly, formative activity using copper wire can differ according to approach and interpretation, and it can be a works with aesthetic value. Thirdly, hair could be express the art of the three-dimensional forms which constitute the mixture of line, surface and space. Fourthly, the handicraft including beading, pleat, piping, rolling that used for works are proper to express the unique formative and the rich colors, and it can also express the transparency. So it showed that copper wire is a proper materials. So, hair art has enlarged the fields with development of technique, and changed to recognition of the hair art, and opened up a new field. Hair art will be positive fields to maximize the possibility, and not only the beauty artist but also the public will be communicate each other.

• 한국수산과학회지
• /
• 제36권4호
• /
• pp.358-364
• /
• 2003

Gross energy intake fecal, nitrogen excretory and metabolized energy of snotted halibut juvenile, Eopsetta grigorjewi, fed on Tigriopus iaponicus (Group A) and the enriched Artemia nauplii (Group B), were quantitatively investigated and represented as balance equations of energy and material. Absorption efficiency (AE), gross conversion efficiency $(K_1)$ and net conversion efnciency $(K_2)$ were also estimated to understand the changes in efficiency by the prey Gross energy intake, fecal, nitrogen excretory, metabolized and growth energy of Group A were $2.790\pm0.247,\;0.495\pm0.046,\;0.018\pm0.003,\;0.214\pm0.047\;cal\;mg^{-1}\;day^{-1}$ and $2.063\;cal\;mg^{-1}\;day^{-1},$ respectively. The same parameters of Group B were $4.801\pm0.165,\;0.579\pm0.031,\;0.055\pm0.010,\;0.306\pm0.048\;cal\;mg^{-1}\;day^{-1}$ and $3.861\;cal\;mg^{-1}\;day^{-1},$ respectively. Energy budget of Group A and B were represented as 100 C= 7.67 M+17.7 F+0.65 U+73.94 G and 100C=6.37 M+ 12.1 F+1.15 U+80.42 G, respectively, where C, M, F, U, and G represent gross energy intake, metabolized energy, fecal energy, nitrogen excretory (non-fecal) energy and growth energy, respectively. AEs of Croup A and B were $81.52\pm1.89,\;86.79\pm0.70\%,$ respectively, with significant difference at p=0.01 level. However, $K_1\;and K_2$ of Group A and B showed no significant difference at p=0.01 level, with $74.21\pm6.57,\;80.48\pm2.76\%\;and\;91.17\pm7.26,\;92.74\pm2.69\%$ respectively. These results suggest that T. japonicus is a possible substitute for Artemia nauplii for the snotted halibut juvenile.