• 한국실내디자인학회논문집
• /
• 제26권6호
• /
• pp.53-61
• /
• 2017

Cityschumers experience the urban with the visual perception while walking an average speed of 4km per hour. At this time, recognition of the color field accounts for more than 70%. Therefore, in this paper the environmental color of urban street is examined by dividing the pedestrian visual field area. In the urban street, the area of the visual field area of the pedestrian is divided into Ground Plane, Roadside, Canopy and Building Wall. In addition, we observe and color survey the environmental color of Exhibition Road, which is the northern side space of South Kensington in London, which adopted the world's first shared space. The color of the visual filed area was dominated as YR, GY, Y, PB. The Ground Pland was dominated by the YR. The reason for this is that the color of the floor has changed due to the shadows of surrounding architecture and facilities. Roadside was dominated in various ways such as GY, BG, PB, B and P. Canopy was mainly composed of PB, GY, etc. It was found that the material color of the lower part of the architecture was reflected. The architecture wall was affected by the reflectance and absorption rate of the transparent material. The first image that comes to mind when thinking about the urban is the street where pedestrians walk, feel and enjoy themselves. Therefore, it is suggested that various policy frameworks for managing and managing urban planning professionals may be different from the perceptions of pedestrians active in mega cities.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1673-1680
• /
• 2000

The degradation of a boiler header constructed by a material, 1Cr-0.5Mo steel in a fossil power plant is observed when the header is exposed for a long period to the high temperature and pressure. The present investigations are for evaluating the effect of the degradation on the material, such as its strength changes. Reheat-treated metal is used to compare the mechanical properties of the degraded and that of reheat-treated materials. Through the investigation, following results are obtained 1) the area ratio of ferrite in the reheat-treated material is larger than that of the degraded material, 2) the hardness and tensile strength of the degraded material are lower than that of the reheat-treated material, 3) the ductile-brittle transition temperature(DBTT) increased toward high temperature region, 4) the fatigue crack growth rate(FCGR) of the degraded material is higher than that of the reheat-treated material in the region of low ΔK value while FCGR of the both materials are similar in high ΔK region.

• 한국재료학회지
• /
• 제13권10호
• /
• pp.663-667
• /
• 2003

The effects of paste materials on field emission properties in a carbon nanotube(CNT) cathode were investigated for high-efficient field emission displays. The major components in CNT paste for screen printing were a metallic Ag-paste, a dielectric glass-frit and CNT ink. The emission current from the cathode by an electron tunneling effect increased with an increase in the dielectric material fraction in the CNT paste, which is related to an increase of field enhancement factor in Fowler-Nordheim equation. The surface treatment used, after soft baking of the screen-printed CNT films, greatly affected the decrease in the turn-on field in CNT cathode and the uniformity of emission sites over the entire CNT film area.

• 한국전산구조공학회논문집
• /
• 제27권3호
• /
• pp.199-206
• /
• 2014

본 논문에서는 변단면 기능경사재료 보에서 중립면 탄성계수가 축방향을 따라 공간적 불확실성을 가질 경우에 대한 구조 응답변화도 산정을 위한 정식화에 대해 논한다. 기능경사재료는 두 이질재료의 체적비가 두께방향으로 연속적으로 변하며 고체화되는 과정으로 제작되는 재료로서 온도 및 응력 등에서 연속적인 변화를 가능하게 하여, 전통 복합재료에서 나타나는 층분리나 균열 발생 등이 제거되는 장점을 가지고 있다. 그러나 이론적으로 설정된 기능경사에 맞는 재료의 제작이 어려우며, 이에 따라 내재적인 불확실성을 가지고 있다. 이를 모사하기 위하여 중립면 탄성계수에서의 불확실성을 추계장으로 모델링하고, 추계적분에 의한 확률변수를 도입하여, 변위의 1, 2차모멘트를 산정할 수 있는 방법을 제시하였다. 제안된 해석 방법은 스펙트럼모사법을 적용한 몬테카를로 해석으로 검증하였다. 추계장의 상관관계거리에 따른 분산계수의 변화, 재료지수 및 기하인수가 변위의 분산계수에 미치는 영향 등을 고찰하였고, 몬테카를로 해석 대비 제안 해석법의 효율성에 대해서도 논하였다.

• Corrosion Science and Technology
• /
• 제8권1호
• /
• pp.27-39
• /
• 2009

Non metallic composite materials, for example, GECM(graphite epoxy composite material) show high specific strength because of low density. These kinds of non metallic composite materials improved the structural effectiveness and operation economics. However, if these materials contacted several metals, corrosion can be arisen since non metallic composite materials have electrical conductivity. This paper dealt with galvanic corrosion between graphite epoxy composite material and several metals. Base on the electrochemical galvanic corrosion test between GECM and metals, corrosion current of carbon steel and aluminium increased with time but corrosion current of stainless steels and titanium decreased and galvanic potential increased. This behavior shows the galvanic corrosion depends upon the presence of passive film. Also, galvanic effect of GECM coupled with ferrous alloys and non-ferrous alloys was lower than that of 100% graphite, which is attributed to lower exposed area of graphite fiber in the GECM than apparent area of the GECM specimen used for the calculation of galvanic current in this work.

• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.234-242
• /
• 2002

A shape optimal design of synthetic intervertebral disc prosthesis is performed using a three-dimensional finite element method. Geometric parameters are introduced to model the cross-sectional geometry of the intervertebral disc. It is assumed that the total strain energy in the intact intervertebral disc is minimized under the normal load conditions, as often cited in other references. To calculate the stain energy density, both the nonlinear material properties and the large deformations are taken into account. The design variables of the annulus fiber angle and the area ratio of the nucleus pulposus are calculated as 31°and 30%, respectively, which complies well with the intact disc. Thus, the same optimization procedure is applied to the design of the synthetic intervertebral disc prosthesis whose material properties are different from the intact disc. For the given synthetic material properties, the values of 67°and 24% for the fiber angle and the area ratio are obtained.

• 한국안전학회지
• /
• 제20권2호
• /
• pp.105-112
• /
• 2005

This is to find out that cement mortar mixed with waste tie particle can be applied for recycling it and enhanced to have shock absorption capacity. Therefore, architectural material specification and its related references for the disposal of it are based on for the study. Test has been performed with procedure, based on the Korea Standard insulation mortar and Compressive Strength Test has been done at K remicon factory approved by Korea Government in Korea, in order to decrease any possible error in mixing procedure. Test molds far insulation capacity and cohesive strength have been delivered to the expert agency for having more exact results. The result from the above test shows that waste tyre mixed with cement mortar has almost equal to the common concrete. This means that the recycling of the waste t)re will be demanded more and more in case of having continued development for this recycling area. And also waste t)to-using construction material can be more applied for construction area than existing material. Thus, this recycling method can be very usefully applied for solving environmental problem and for establishing economic aspect.

• 한국전기전자재료학회논문지
• /
• 제23권6호
• /
• pp.471-476
• /
• 2010

This paper has studied dissymmetrical light distribution design using the secondary optics in the simulation. fundamental Lambertian radiation distribution based on LED has been cut off by the secondary optics, and the first surface slope of lens and second surface slope of total reflection area have been calculated through formula. PMMA (the index of refraction: 1.49361) which is material of lens has been selected. critical angle($42.02993^{\circ}$) between Air and PMMA has been calulated by snell's law, and total reflection angle slope has been selected about $16.67^{\circ}$ to occur the total reflection. when the first surface slope and the second surface slope has been set up, Rays of all total reflection area have generated the total reflection. finally, designed LED Module has been estimated by Korean Industrial Standards for LED safety street lighting. dissymmetrical light distribution have been analyzed with reached effect of road illuminance, and average road illuminance which are each 70.6 lx, 40.35 lx, and 25.88 lx have been satisfied with Korean Industrial Standards for LED safety street lighting.

• 한국전기전자재료학회논문지
• /
• 제18권4호
• /
• pp.313-320
• /
• 2005

Stick-slip friction is one of the material removal mechanisms in tribology. It occurs when the static friction force is larger than the dynamic friction force, and make the friction curve fluctuated. In the friction monitoring of chemical mechanical polishing(CMP), the friction force also vibrates just as stick-slip friction. In this paper, an attempt to show the similarity between stick-slip friction and the friction of CMP was conducted. The prepared hard pa(IC1000/Suba400 stacked/sup TM/) and soft pad(Suba400/sup TM/) were tested with SiO₂ slurry. The friction force was measured by piezoelectric sensor. According to this experiment, it was shown that as the head and table velocity became faster, the stick-slip time shortened because of the change of real contact area. And, the gradient of stick-slip period as a function of head and table speed in soft pad was more precipitous than that of hard one. From these results, it seems that the fluctuating friction force in CMP is stick-slip friction caused by viscoelastic behavior of the pad and the change of real contact area.

• 한국결정성장학회지
• /
• 제23권2호
• /
• pp.76-80
• /
• 2013

For further improvement of osseo-integration of bone crystal with a dental implant, a design optimization study is carried out for various holes inside its body to deliver bioactive materials and the effect of bioactive material injection on the bone crystal growing. When bioactive material is absorbed, the bone crystal can grow into holes, which would increase the strength of implant bonding as well as a surface integration. The stress concentrations near the uppermost outlet holes were reduced with increasing the number of outlet holes. A design improvement in the uppermost outlet was shown to be effective in reducing the stress concentration. For design parameters under consideration in this study, total area of outlet of 6.38 $mm^2$ and maximum stress of 1.114 MPa, which corresponds to type 6-C. It is due to the minimization of maximum stress and total area of outlet. The design of the outlet facing down was more effective in reducing the maximum stress value compared with a horizontal symmetry.