• Journal of the Korean Geosynthetics Society
• /
• v.17 no.3
• /
• pp.19-32
• /
• 2018

Gravel Compaction Pile (GCP) method is currently being designed and constructed by empirical method because quantitative design method has not been developed, leading to various types of and frequent destruction such as expansion failure and shear failure and difficulties in establishing clear cause and developing measure to prevent destruction. In addition, despite the difference with domestic construction equipment and material characteristics, the methods applied to the overseas ground is applied to the domestic as it is, leading to remarkable difference between applied values and measured values in variables such as bearing capacity and the settlement amount. The purpose of this study was, therefore, to propose a reasonable and safe design method of GCP method by analyzing the settlement and stress behavior characteristics according to ground strength change under GCP method applied to domestic clay ground. For the purpose, settlement amount of composite ground, stress concentration ratio, and maximum horizontal displacement and expected location of GCP were analyzed using ABAQUS. The results of analysis showed that the settlement and Settlement reduction rate of composite ground decreased by more than 60% under replacement ratio of 30% or more, that the maximum horizontal displacement of GCP occurred at the depth 2.6 times pile diameter, and that the difference in horizontal displacement is slight under replacement ratio of 30%.

• Journal of The Korean Association For Science Education
• /
• v.17 no.1
• /
• pp.55-64
• /
• 1997

Experiments done in traditional physics laboratories have been criticized for giving too detailed instruction so that student could follow the experimental procedure without understanding. This type of experiment is often called "cookbook experiment." Cookbook experiment was known to be little help to understand the physics concepts and to increase student interest. To solve these problems with traditional cookbook experiment, non-directive introductory physics laboratory was designed and tried with the freshmen of Department of Physics Education of Seoul National University. Non-directive laboratory was characterized by the lack of step by step instruction for students to follow. The instruction students received consisted of the goal of experiment, a short introduction, and a list of suggested materials to be used. Student designed the experimental procedure and decided what material they wanted to use. One group submitted one lab report as a group to encourage cooperation among students. Lab report could be written in any form students wanted and no penalty point was given to poor data or inappropriate theory, etc to encourage taking risks. Penalty points were given if the students did not get involved during class hours. Student received extra point for being creative and / or working hard. Teaching assistants used Socratic dialogue in helping students to find their own way instead of explaining what they had to do. Students' interest about the non-directive experiment was studies at the of the semester. A questionnaire was made for students to answer. The questionnaire consisted of four categories, the equipment and the laboratory, the experimental procedure, the lab report, and teaching assistant. For each category, student were asked to explain the differences from other laboratory classes, features they liked and the reasons why they do, features they did not like and why they did not. At the end of the questionnaire, students were asked what hey wanted to change and what they did not. They also could put any opinion they had other than the questions asked. Student overall opinion was very positive. All the students said they liked the lack of detailed experimental procedure because it gave them the feeling of achievement, made them feel challenged and think in more diverse and creative ways. Students liked the lab report because group report forced them to discuss more and the free form lab report helped them to focus on the what they did. Student responses about the teaching assistant was also positive but not as enthusiastic as the experimental procedure or lab report. However students recognised that the role of the teaching assistant was as a guide, a supporter, or a facilitator.

• Journal of Information Display
• /
• v.11 no.1
• /
• pp.8-11
• /
• 2010

In this study, a new thin films passivation technique using Zn with high electronegativity and $MgF_2$, a fluorine material with better optical transmittance than the sealing film materials that have thus far been reported was proposed. Targets with various ratios of $MgF_2$ to Zn (5:5, 4:6 and 3:7) were fabricated to control the amount of Zn in the passivation films. The Mg-Zn-F films were deposited onto the substrates and Zn was located in the gap between the lattices of $MgF_2$ without chemical metathesis in the Mg-Zn-F films. The thickness and optical transmittance of the deposited passivation films were approximately 200 nm and 80%, respectively. It was confirmed via electron dispersive spectroscopy (EDS) analysis that the Zn content of the film that was sputtered using a 4:6 ratio target was 9.84 wt%. The Zn contents of the films made from the 5:5 and 3:7 ratio targets were 2.07 and 5.01 wt%, respectively. The water vapor transmission rate (WVTR) was determined to be $38^{\circ}C$, RH 90-100%. The WVTR of the Mg-Zn-F film that was deposited with a 4:6 ratio target nearly reached the limit of the equipment, $1\times10^{-3}\;gm^2{\cdot}day$. As the Zn portion increased, the packing density also increased, and it was found that the passivation films effectively prevented the permeation by either oxygen or water vapor. To measure the characteristics of gas barrier, the film was applied to the emitting device to evaluate their lifetime. The lifetime of the applied device with passivation was increased to 25 times that of the PLED device, which was non-passivated.

• Korean Journal of Environment and Ecology
• /
• v.31 no.5
• /
• pp.455-460
• /
• 2017

Since a new (unrecorded) species was reported in 2016, a total of four sea snake species are currently listed in Korean waters. Although the possibility of year-round inhabitation of sea snakes in Korean waters has increased due to climate change, the related studies are scarce because of the lack of human resources and available equipment. We placed posters and banners requesting voluntary information on sea snakes in coastal regions and Jeju Island to obtain information on sea snake distributions in the coasts of South Korea and possible specimens through volunteer activities. As a result, we received total 45 reliable reports, including photographs or video, between March 2013 and December 2016. Eighteen reports on three sea snake species and thirteen capture cases of two species were submitted from Jeju Island and southern coastal regions of Korea mostly between August and November. There were twenty-seven false reports including seven cases of terrestrial snakes, eighteen fishes, and one each of invertebrate and inanimate material. Based on the results, we proposed the effective way of sea snake surveys using volunteers.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.428-436
• /
• 2012

This study aimed to develop the multi-span plastic greenhouse which is suitable for tomato cultivation and is safe against climatic disasters such as typhoon or heavy snow. The width and heights of eaves and ridge of newly developed tomato greenhouse are 7, 4.5 and 6.5 m, respectively. The width is the same but the eaves and ridge heights are 1.8 and 2 m higher than conventional 1-2 W greenhouses, respectively. Cross beam has been designed as a truss structure so it can sustain loads of tomato and equipment. Tomato greenhouse has been designed according to climatic disaster preventing design standard maintaining the high height. In other words, the material dimensions and interval of materials including column and rafter have been set to stand against $40m{\cdot}s^{-1}$ of wind and 40 cm of snow. Tomato greenhouse has been equipped with rack-pinion type roof vents which have been used in glass greenhouse in order to prevent excessive rise in air temperature. This vent type is different from that of 1-2 W type greenhouse which is made by rolling up and down the vinyl at upper part of column. Roof vents are installed at ridge, and thus external air inflow and natural ventilation are maximized. As the height increases, heating cost increase as well and, therefore, tomato greenhouse has been equipped with multi-layered thermal curtain, of which thermo-keeping is excellent, to prevent heat from escaping.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.525-536
• /
• 2009

The current residential process adheres to a traditional method of construction involving wood framing on-site on poured concrete foundations which has been widely applied in North America. A conventional residential construction process can include seventeen distinct stages ranging from stake-out to pre-occupancy inspection. The current practice possesses short comings including high construction material wastes, long scheduling timelines, adverse weather conditions, poor quality, low efficiencies and negative environmental impacts from transportation and equipment use. Over CAN $5 billion dollars was spent in the construction sector during 2007 in Canada. Previous findings in CO₂ emissions during the construction process of a conventional dwelling emphasize more than 45 tonnes of CO₂ emissions. Hence, in Alberta alone during 2007, almost 50,000 residential units would release more than two million tonnes of CO₂. These numbers demonstrate the economical and environmental impact in building construction and its relationship with CO₂ emissions. The aim of this paper is to quantify the CO₂ emissions from the current residential construction process in order to establish the baseline for CO₂ emission reduction opportunities. The quantification collection methodology will be approached by identifying the seventeen various stages of construction and quantifying the contributions of CO₂ from specific activities and their impacts of work for each stage. The approach of separating these into separate stages for collection will allow for independent opportunities for analysis from various independent contractors from the entire scope of work. The use of BIM will be implemented to efficiently quantify CO₂ emissions. Based on the CO₂ quantification baseline, emission reduction opportunities such as an industrialized construction process will be introduced that allows homebuilders to reduce the environmental and economical impact of home construction while enabling them to produce higher quality, more energy efficient homes in a safer and shorter period of time.

• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.83-88
• /
• 2011

This study presented the structure and characteristics of vinyl cords used for wiring electric equipment and appliances and analyzed the photographs of damaged flat-type vinyl cords (VFF, $1.25mm^2$) and the metallic cross-sectional structure of melted conductors. Normal VFFs were made by twisting several strands together and the surface of the conductor was red brown. In addition, from the analysis of the metallic structure of the conductor, it was found that its grains had been elongated. The surface of a VFF damaged by normal flame showed no sheen with carbonized insulation material fused on the conductor surface. In addition, from the analysis of the cross-sectional structure of the melted area, it was found that voids of a certain shape were formed on it but that the cord's own elongation structure could not be checked. The cross-sectional analysis of the melted conductor damaged by the external flame applied to a VFF to which electric current was being applied showed no elongation structure for each cord, and revealed that irregular voids and a columnar structure had grown. The surface of the VFF damaged by overcurrent was uniformly carbonized and the cross-sectional structure analysis of the melted conductor revealed that the dendritic structure had grown. The analysis of the characteristics of the VFF melted by short-circuit showed that even though some part of the surface was contaminated, it showed little sheen and that the area rebounded by melting was round in shape. In addition, the cross-sectional structure analysis using a metallurgical microscope showed the boundary surface and columnar structure and revealed an amorphous structure like normal copper at areas other than the melted conductor.

• Convergence Security Journal
• /
• v.17 no.5
• /
• pp.163-178
• /
• 2017

Recently, drone applications have been expanded not only in the military and security fields but also in daily life such as commercial and sports, and there is also a growing interest in using drone for private security work. This study focuses on the discussion on the use of drones in private security, drones regulation in the related laws such as the Private Security Act and the Aviation Safety Law, and major issues in accepting the Private Security Act. First, it focuses on the scope of private security work as defined by the Private Security Act, focusing on the use of drones as surveillance, information gathering, guidance and warning services, evacuation services, search and related material transport services, respectively. Second, the related laws for the use of drones in private security work include the Private Security Act and the Aviation Safety Act. However, the Private Security Act does not prescribe the current drones and the use of drones is regulated by Aviation Safety Act. Third, it is necessary to adjust the qualifications and authority range of security guards in the Private Security Act, to accept the drones as a type of security equipment, and to consider how countermeasures against threat types using drones should be accepted in the Private Security Act.

• Journal of Practical Engineering Education
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2019

Virtual Training is an educational exercise in which the environment or the situation is virtually implemented for specific training and proceed like a real situation. In recent years, the virtual reality technology has developed rapidly, and the demand for experiencing situation that are not directly experienced in the real world is increasing more and more in virtual reality. Particularly, there is an increasing demand of contents for hands-on training and virtual training for equipment training that replaces high-risk and high-cost industry training. The virtual training contents have been developed and utilized for the purpose of technical training. However, it is known that virtual training is more effective when it is used as a supplementary training material or combined with e-learning contents rather than replacing one training course with virtual training contents because purpose and effect are different from general technical training course. In this study, we explored the development method for effective utilization of electrohydraulic servo control process, which is the virtual reality contents developed in 2017 in combination with e-learning contents. In addition, in order to establish a teaching and learning strategy, we actually develop and operate a case studies using virtual training contents. Surveys and case studies are conducted to investigate the effects of teaching and learning strategies applied in the classroom on students and their educational usefulness.

• Clean Technology
• /
• v.26 no.3
• /
• pp.228-236
• /
• 2020

Korea has an economy based on manufacturing industrial fields, which produce high amounts of hazardous wastes, in spite of few landfill candidates, and a significant concern for fine airborne particulates; therefore, traditional waste management is difficult to apply in this country. Moreover, waste collection and accumulation have recently been intensified by the waste import prohibitions or regulations in developing nations, the universalization of delivery services in Korea, and the global COVID-19 crisis. This study thus presents a domestic waste management strategy that aims to address the recent issues on waste. The contents of the strategy as the main results of the study include the (1) improvement of the compatibility of the classification codes between the domestic hazardous waste and the international ones such as those of the Basel Convention; (2) consideration of the mixed hazard indices to represent toxicity from low-content components such as rare earth metals often contained in electrical and electronic equipment waste; (3) management application based on risks throughout the life cycles of waste; (4) establishment of detailed material flow information of waste by integrating the Albaro system, Pollutant Release and Transfer Register (PRTR) system, and online trade databases; (5) real-time monitoring and prediction of the waste movement or discharge using positional sensors and geographic information systems, among others; and (6) selection and implementation of optimal treatment or recycling practices through Life Cycle Assessment (LCA) and clean technologies.