• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.3
• /
• pp.76-79
• /
• 2014

Face recognition is very challenging because of the unexpected changes of pose, expression, and illumination. Facial detection in the mobile environments has additional difficulty since the computational resources are very limited. This paper discusses face detection based on frequency domain matched filtering in the mobile environments. Face detection is performed by a linear or phase-only matched filter and sequential verification stages. The candidate window regions are selected by a number of peaks of the matched filtering outputs. The sequential stages comprise a skin-color test and an edge mask filtering tests, which aim to remove false alarms among selected candidate windows. The algorithms are built with JAVA language on the mobile device operated by the Android platform. The simulation and experimental results show that real-time face detection can be performed successfully in the mobile environments.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.547-550
• /
• 2001

Through matched filtering synthetic aperture radar (SAR) produces high-resolution imagery from data collected by a relative small antenna. While the impulse response obtained by the matched filter approach produces the best achievable signal-to-noise ratio, large sidelobes must be reduced to obtain higher-resolution SAR images. So, many enhancement methods of SAR imagery have been proposed. As a deconvolution method, the phase-extension inverse filtering is based on the characteristics of the matched filtering used in SAR imaging. It improves spatial resolution as well as effectively suppresses the sidelobes with low computational complexity. In the phase-extension inverse filtering, the impulse response is obtained from simulation with a point target. But in a real SAR environment, for example ERS-1, the impulse response is distorted by many non-ideal factors. So, in the phase-extension inverse filtering for a real SAR processing, the magnitudes of the frequency transfer function have to be compensated to produce more desirable results. In this paper, an estimation method to obtain a more accurate impulse response from a real SAR image is studied. And a compensation scheme to produce better performance of the phase-extension inverse filtering is also introduced.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1131-1134
• /
• 2008

In this invited paper, numerical reconstruction and pattern recognition using integral imaging are overviewed. The computational integral imaging method reconstructs three-dimensional information at arbitrary depth-levels. Photon-counting nonlinear matched filtering combined with the computational reconstruction provides promising results for the application of low-light level recognition.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.8
• /
• pp.938-946
• /
• 1992

A novel 2-dimensional matched filter of the parallel-jaw type using fuzzy logic is proposed for bin picking. Specifically, the averaged pixel intensity of the windowed region for the filtering is considered to be fuzzy. Also membership functions for darkness and brightness are designed by employing the intensity histogram of the image. Then a rule is given to know how much a windowed region can be a possible holdsite. Furthermore eight rules are made to determine the part orientation, where Mamdani's reasoning method is applied. The proposed technique shows better performances than that of the conventional matched filtering technique in the following senses` 1) most of holdsites determined by the proposed technique are not concentrated at the locations nearly the end of part and 2) our filter is rather insensitive to noises than the conventional method. To show the validities of our proposed technique, some experimental results are illustrated and compared with the results by conventional matched filter technique.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.4
• /
• pp.288-295
• /
• 2004

Detection and localization of a slow and quiet target in shallow water environments is a challenging problem for which it is well known that snapshot is deficient because of a fast and strong interferer. This paper presents waveguide interference filtering technique that mitigate strong interferer problems in adaptive matched field processing. MCM (multiple constraint method) based on NDC (null direction constraint) has been proposed for new spatial interferer filter. MCM-NDC using replica force a interferer component to be filtered through CSDM (cross-spectral density matrix). This filtering have an effect on sidelobe reduction and restoring of signal gain of a quiet target. This technique was applied to a simulation on Pekeris waveguide and vertical array data from MAPLE03 (matched acoustic properties and localization experiment) in the East Sea and was shown to improve SBNR (signal-to-background-and-noise ratio) over the standard MVDR (minimum-variance distortionless response) and NSP (null space projection) technique.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.208-211
• /
• 2008

Band-limited filtering will be applied to remove interference resulted from two neighbored channels in the transmission of KOMPSAT-5 X-Band image data. In that case, receiver in ground station should prepare righteous matched filter to avoid huge BER degradation depending on the matched filter of COTS receiver. As an effort to simulate the bandlimited filtering, test filter was designed and manufactured on the basis of main specification for output filter of KOMPSAT-5 satellite. Consequently, 1.8dB of BER degradation was measured at the output of test band-pass filter, but the degradation was downsized up to 0.4dB thanks to the adaptive matched filter of COTS receiver.

• Journal of Biomedical Engineering Research
• /
• v.27 no.1
• /
• pp.22-29
• /
• 2006

This paper proposes an efficient array beamforming method using spatial matched filtering for ultrasound imaging. In the proposed method, ultrasound waves are transmitted from an array subaperture with fixed transmit focus as in conventional array imaging. At receive, radio frequency (RF) echo signals from each receive channel are passed through a spatial matched filter that is constructed based on the system transmit-receive spatial impulse response. The filtered echo signals are then summed. The filter remaps and spatially registers the acoustic energy from each element so that the pulse-echo impulse response of the summed output is focused with acceptably low side lobes. Analytical beam pattern analysis and simulation results using a linear array show that the proposed spatial filtering method can provide more improved spatial resolution and contrast-to-noise ratio (CNR) compared with conventional dynamic receive focusing (DRF) method by implementing two-way dynamically focused beam pattern throughout the field.

• 전자공학회논문지 IE
• /
• v.47 no.2
• /
• pp.60-65
• /
• 2010

In this paper, we propose a dual-band filtering method optimized to DBO-CSS systems which are alternatively transmitted in low and high bands. The conventional channel filter which passes entire signal bandwidth causes a problem that excessive noise in neighboring sub-band is added while one of signals in two sub-bands is received. The dual-band filtering proposed in this paper can overcome the performance degradation in the conventional filtering method without increase of hardware complexity. The proposed method is based on two filters to be matched with DBO-CSS signals receiving alternatively and can exclude the undesired noise in neighboring sub-band. Simulation results for the proposed method show better performance about 2.5dB than the conventional one.

• Journal of Biomedical Engineering Research
• /
• v.16 no.4
• /
• pp.439-446
• /
• 1995

In this paper, we present an algorithm for the detection of blood vessel contours in coronary aiteriograms. The proposed algorithm is based on both matched filtering and adaptive tracking. The proposed algorithm has merits in that it overcomes the bifurcation section problem as well as narrow vessel problem. Moreover, the algorithm has fast performance as well as insensitivity to noise.

• Proceedings of the KOSOMBE Conference
• /
• v.1993 no.11
• /
• pp.167-170
• /
• 1993

matched filter는 신호와 잡음의 통계적 값을 알고 있을 때 신호대 잡음비를 최대로 하는 filter이다. 그런데, matched filter가 최적화 되려면 잡음이 white noise이어야한다. 그러나 ECG신호에 존재하는 잡음은 여러가지 성분이 공존하는 서로 연관되어있는 잡음이다. 따라서 whitening filter를 사용하여 잡음을 whitening시킨후에 matched filter를 통과 시켜야한다. 본 논문에서는 QRS complex를 검출하기 위한 matched filter에 있어서 LMS방법을 이용한 linear whitening filter와 neural network을 이용한 non-linear whitening filter의 특성을 비교하였다.