• Fashion & Textile Research Journal
• /
• v.17 no.3
• /
• pp.447-461
• /
• 2015

The purpose of this study is to develop a torso pattern that is highly representative for the proper body shape of women in their thirties. Size data of the women with age of 30 through 39 from the database of Size Korea 2004 were used for the study. In order to develop a master pattern which will be used as the benchmark for grading of research group, 4 existing torso block drafting methods were compared based on the data gathered and the block with the highest evaluation score was utilized as a reference point. For the analysis, data was divided into four types, only the data of 138 subjects which were evaluated at least by four or more experts as valid were used for the study. The major results can be summarized as follow. The women of bust girth of 91cm and height of 160cm which was turned out to be representative type of research group were used as standard measurement for the purpose of reflecting not only curve length of the 3D analysis measurement but also the difference between front and back thickness to the pattern. Dart locations were set based on front and back torso ease, shoulder area revisions, front sagging length 1.5cm and cross section crevice length analysis. According to the experts' appearance evaluation of the pattern was found to be better than the control pattern which was regarded as the best among 4 patterns created based on existing torso block drafting methods.

• Korean Institute of Interior Design Journal
• /
• v.13 no.2
• /
• pp.109-119
• /
• 2004

This study was intended to grasp the housing unit plan which the residents preferred. The subjects were 100 housewives who lived in 85$m^2$ sized housing units in the New Apartment Complex, Gimhae. First, four elements of unit plan were selected on the basis of the results of the POE which was carried out for the same subject the size of master bedroom and living room, the openness of dining/kitchen from living room, the openness of living room from entrance, and whether or not a bathtub or a shower booth is in bathroom. Then, eight design alternatives of unit plan made by combination of these four elements according to orthoplan were visualized by computer media. This visualized tool was used for collecting data. The results of the study were as follows: The important determinants of the residents' preferences for unit plan were the size of master bedroom and living room and the openness of living room from entrance. The residents preferred the unit plan which living room was large and the view from living room to dining/kitchen was open. Also, the important elements were different according to the characteristics of the residents. Therefore, the housing alternatives which are flexible and optional would be desirable.

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.49-54
• /
• 1977

In order to obtain the field efficiency of the power tiller plowing on the various size of and its length-width field tests were performed with 8ps.10ps. power tiller popularly used in the korean rural area, and Satoh 5ps. made in Japan, Land Master 5ps. made in England were tested to compare with the field efficiency of the above power tillers. The results obtained in this tests were as follows ; 1. In considering of the resting time and the refueling time and others, the field efficiency of Satoh was the highest among the power tillers as to be 80%, at the 8ps. power tiller 76.5%, at the 10ps. power tiller 79.3% and the lowest field efficiency was obtained at the Land Master as 75.7%. 2. The field efficiency of the each power tiller increased as the ratio of the length to width of the field was increased. 3. The increasing rate of field efficiency was much bigger in the below the ratio of 5 : 1 but at the upper ratio increased above, the ratio was nearly constant. 4. The field efficiency of the power tiller was higher at the smaller power tiller than the larger, except the Land Master , because of easily operating and turning of the power tiller by virtue of its lighter weight.

• Journal of Welding and Joining
• /
• v.33 no.6
• /
• pp.49-54
• /
• 2015

Welding process is of importance to assemble products or structures, but also the process is structural weakness due to stress concentration in welding joint. The fatigue design of welded joint requires time & labor consuming fatigue test because the fatigue life is various according to the depth of joint, joint type and load type etc. In fatigue design codes, they guide to classify welding joints with their shape( BS7608, IIW Documents) and provide fatigue assessment information. In terms of numerical method for fatigue analysis, it is also difficult to decide the stress peak in joint because of mesh sensitivity which means that stress value is varies with element type or size on stress concentration zone. Hot-spot method is used generally, but Battelle of United States proposed Master S-N Curve based on structural stresses converted by mechanical equilibrium theory. In this research, we extracted master S-N curve from Battelle's fatigue test DB including test data of various welding joints to apply on Non-Load-Carrying cruciform Joint. Comparing fatigue results between the case of using normal stress and case of structural stress cor the cruciform Joint, The suggested Battelle method showed successive results.

• Journal of Information Science Theory and Practice
• /
• v.5 no.1
• /
• pp.26-46
• /
• 2017

This article investigates perceptions and use of Open Access journals (OAJs) by master's degree students in two universities in the southwestern part of Nigeria. A descriptive survey design was used in the study and the study population was comprised of 7,423 master's degree students in the University of Ibadan and 1,867 from Obafemi Awolowo University. A multistage random sampling technique was used to select a sample size of 249 and the data collection instrument was a structured questionnaire. Data were analyzed using frequency counts, percentages, mean, standard deviation, correlation, and regression analyses. The findings revealed that OAJs were used for learning, dissertation writing, personal research, and development. OAJs were not frequently used because of download delays, unavailability of Internet facilities, and limited access to computers terminals, among other issues. OAJs were found to be of relative advantage, positively perceived, and found to be compatible with existing values and quality assurance in scholarly publications, hence their use for academic activities. The regression analyses showed that there was a significant positive relationship between positive perception, perception of relative advantage, perception of compatibility, perception complexity, and master's degree students' use of OAJs. Negative perception was found to have a significant negative correlation with the use of OAJs. This article recommends that quality assurance of OAJs should be ensured in order to boost users' positive perceptions to increase their patronage and usage of these scholarly outlets for various academic activities, which will in turn encourage research and development across the various institutions of higher learning in Nigeria.

• Journal of Power Electronics
• /
• v.12 no.6
• /
• pp.886-894
• /
• 2012

This paper presents a secondary-side, dual-mode feedback LLC resonant controller IC with dynamic PWM dimming for LED backlight units. In order to reduce the cost, master and slave outputs can be generated simultaneously with a single LLC resonant core based on dual-mode feedback topologies. Pulse Frequency Modulation (PFM) and Pulse Width Modulation (PWM) schemes are used for the master stage and slave stage, respectively. In order to guarantee the correct dual feedback operation, Phased-Locked Loop (PLL)-based automatic duty control circuit is proposed in this paper. The chip is fabricated using $0.35{\mu}m$ Bipolar-CMOS-DMOS (BCD) technology, and the die size is $2.5mm{\times}2.5mm$. The frequency of the gate driver (GDA/GDB) in the clock generator ranges from 50 to 425 kHz. The current consumption of the LLC resonant controller IC is 40 mA for a 100 kHz operation frequency using a 15 V supply. The duty ratio of the slave stage can be controlled from 40% to 60% independent of the frequency of the master stage.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.1 s.232
• /
• pp.124-131
• /
• 2005

BOM(Bill of Materials) is a list or description of raw materials, parts and assemblies that define a product. Although it is very important for maintenance information system of urban transit, it has problems that the size of database, inaccuracy and the flexibility which is measured as the number of updating records in accordance with added new product or engineering change. To solve these, we divide BOM to a master BOM and various function BOM constructed from the master BOM. That is the component based BOM management system, which is mutually independent and integrated efficiently using component technology. Consequently, after defining the component based master BOM, it is easy to manage the data structure, even restruct, in case there is a need for change of environment or data.

• Restorative Dentistry and Endodontics
• /
• v.30 no.2
• /
• pp.112-120
• /
• 2005

This study was done to evaluate whether there were any differences in microleakage of class V composite restorations according to restoration site and cavity size. Total sixty-four restorations were made in molar teeth using Esthet-X. Small ($2\;{\times}\;2\;{\times}\;1.5\;mm$) and large ($4{\times}2{\times}1.5\;mm$) restorations were made at the buccal/lingual surface and the proximal surface each. After 1,000 times of thermocycling ($5^{\circ}\;-\;55^{\circ}C$), resin replica was made and the percentage of marginal gap to the whole periphery of the restoration was estimated from SEM evaluation. Thermocycled tooth was dye penetrated with $50\%$ silver nitrate solution. After imbedding in an auto-curing resin, it was serially ground with a thickness of 0.25 mm. Volumetric microleakage was estimated after reconstructing three dimensionally. Two-way ANOVA and independent T-test for dye volume, Mann-Whitney U test for the percentage of marginal gap, Spearman's rho test for the relationship between two techniques were used, The results were as follows : 1. The site and size of the restoration affected on the microleakage of restoration. Namely, much more leakage was seen in the proximal and the large restorations rather than the buccal/lingual and the small restorations. 2. Close relationship was found between two techniques (Correlation coefficient = 0.614/ P = 0.000). Within the limits of this study, it was noted that proximal and the large restorations leaked more than buccal/lingual and the small restorations. Therefore, it should be strictly recommended large exposure of margins should be avoided by reducing unnecessary tooth reduction.

• Journal of the Korean housing association
• /
• v.11 no.1
• /
• pp.37-44
• /
• 2000

The purpose of this research is to examine the evolution of low-cost sales housing and give suggestions for the future housing for the 21st century. This paper investigates the trends of low-cost suburban housing since world War II, as examplified by the Levitt housing in the Northeastern regions of the States. This research analyzes the trends of 14 variables including total floor area. lot size, living room size, kitchen size, mean bedroom size, master bedroom size, number of bedrooms, number of bathrooms, family room, garage, number of story, appliances and features, values, and values per sq ft. Nine entry-level houses were chosen as cases for comparative purpose at different points in time from 1940's to 1990's. This research finds that house sizes have been grown until 1960s, but this trend has reversed with shrinking economy and changing family lifestyles. The trend for smaller housing equipped with several features and convenient equipments will be continued for the next decades to come.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2003.05a
• /
• pp.69-73
• /
• 2003

The purpose of this study was to investigate the furniture use pattern and needs for built-in furniture of apartment residents. The subjects were 289 housewives who live in apartment houses in Haeundae, Busan. The size of apartments was 60 $m^2$ or 85 $m^2$.The self-administered questionnaire was used. There was no any furniture pattern which can be categorized as the specific one. That is, each family has different kinds of furniture pattern in living room and master bedroom. Also, some subjects wanted to have builted-in furniture in master bedroom.