• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.148-151
• /
• 2004

Different kinds of feedstock of semisolid a356 aluminum alloy manufactured by EMS stirring only, inoculation of Al-5Ti-B only and combination of inoculation and EMS stirring were investigated. It is found that the grain size of these feedstock are $350{\mu}m$ for EMS casting only, $320{\mu}m$ for inoculation by Al-5Ti-B, and $100{\mu}m$ for the combination of EMS stirring and inoculation of Al-5Ti-B master alloys. The microstructure of the sample obtain by combination of inoculation and EMS system show the best homogeneousness and finest grains.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.2
• /
• pp.143-149
• /
• 2010

The river master plan was established every 10 years in Korea. The basin characteristics of 62 small and medium size rivers of which master plans were recently established during the past three years in Gyeonggi-do were investigated, and design rainfalls and design floods in the past and the latest were compared and analyzed. It was predicted that basin data and flood estimating method changed design flood. The quantitative amount of design floods were analyzed for 6 basins like Gungunchen etc. As the results, the increasing factors of design flood were the application of critical duration time, temporal time of rainfall and the increase of CN value. The decreasing factors of design flood were the application of Huff's rainfall distribution instead of Mononobe one and the ARF. The application of critical duration time increased flood about 60% whereas the application of Huff's rainfall distribution method estimated less flood than Mononobe about 62%. Considering critical duration time and changing rainfall distribution were the most important factors of increasing or decreasing design flood. However, trends of flood variation were differently analyzed by factors in 6 basins because characteristics of topography, weather, hydrology and hydraulic were different, now that correlations were not found between factors and flood variation. Flood variation is evaluated by complex effects of factors so new flood recalculated by reasonable methods should be considered as design flood.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.23 no.2
• /
• pp.115-125
• /
• 2016

Purpose: The purpose of this study was to use meta-analysis to evaluate factors and variables related to the emotional labor of hospital nurses. Method: The study included variables obtained from 66 recently published studies, doctoral dissertations, and master's theses. Results: The related variables were categorized into five factor groups: internal character factor, nursing care related factor, environmental factor, emotional response, and job response. For the defensive variable, job related response (effect size [ES]=-.17), environment (ES=-.14), internal character (ES=-.08), nursing care (ES=-.06), and emotional response (ES=-.06) showed significant effect size among the five categorized variable groups. For the risk variable, internal character (ES=.44), emotional response (ES=.46), environment (ES=.27), job related response (ES=.27), and nursing care (ES=.19) showed significant effect size among the five categorized variable groups. Conclusion: The results of this study identified defensive and risk variables related to emotional labor of hospital nurses. Self-efficacy, social support, leaders' care, and communication are important factors for managing emotional labor of hospital nurses.

• Fashion & Textile Research Journal
• /
• v.19 no.6
• /
• pp.749-758
• /
• 2017

The purpose of the present study is to develop a grading deviation, which is appropriate for the body type of women in thirties, by analyzing the three-dimensional body type. The materials for the study were adopted from the body measurement data of women in the age group of 30 to 39 years old, provided from Size Korea. By reflecting the factor analysis results using the three-dimensional shape measurement, deviations were derived. First, six factors influencing the changes in human body shape were derived as waist-hip length factor, bust-waist shape factor, back protrusion back shoulder factor, bust length factor, shoulder length factor, and frontal waist dart factor. The bust size and height, which can be easily utilized for the top original grading, were used for deriving a regression formula, and the deviation was set in accordance with the result. Second, by applying the deviation which reflects the changes in the body shape, the crimps which were generated due to the application of existing deviation were remarkably reduced, indicating that the grading of the present study is more fitting than the existing one. The deviation derived by the analysis of actual increase and decrease of body size was more fitting than the existing one. This was proved by actual wearing experiment, which represents the significance of this study.

• Transactions of Materials Processing
• /
• v.14 no.5 s.77
• /
• pp.473-476
• /
• 2005

The demand of on-chip total analyzing system with MEMS (micro electro mechanical system) bio/chemical sensor is rapidly increasing. In on-chip total analyzing system, to detect the bio/chemical products with submicron feature size, a filtration system with nano-filter is required. One of the conventional methods to fabricate nano-filter is to use direct patterning or RIE (reactive ion etching). However, those procedures are very costly and are not suitable fur mass production. In this study, we suggested new fabrication method for a nano-filter based on replication process, which is simple and low cost process. After the Si master was fabricated by laser interference lithography and reactive ion etching process, the polymeric mold was replicated by UV-imprint process. Metallic nano-filter was fabricated after removing the polymeric part of metal deposited polymeric mold. Finally, our fabrication method was applied to metallic nano-filter with $1{\mu}m$ pitch size and $0.4{\mu}m$ hole size for bacteria sensor application.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.3
• /
• pp.387-395
• /
• 2015

Starfish, a species of Echinoderm, is widely known as a predator on benthic invertebrate. A series of fishing experiments was carried out in the western coastal waters of Korea from September, 2011 to November, 2012, using the drum-shaped pots of different mesh sizes (17.1, 24.8, 35.3, 39.8, and 48.3 mm) to describe the composition of the catch species and the mesh selectivity of the pot for starfish. Some species including fish, crab, and starfish were caught in the experimental pots. The SELECT (Share Each Length's Catch Total) method was applied to describe the selectivity of the pot for starfish Asterina pectinifera. The master selection curve was estimated to be s(R) = exp(10.358R-4.086) / [1+exp(10.358R-4.086)], where R is the ratio of arm length to mesh size. The relative arm length of 50% retention was 0.395, and the selection range was 0.212. The results should be helpful to understand the relationship between the catch size of starfish and the mesh size of pot.

• Journal of Korean Public Health Nursing
• /
• v.33 no.3
• /
• pp.409-419
• /
• 2019

Purpose: Factors related to the major satisfaction of nursing students were systematically searched and quantitatively synthesized. Methods: Meta-analysis was conducted upon 47 articles in Korean master and doctorate degree dissertations and academic journals. Meta-analysis of major satisfaction-related variables was conducted using Comprehensive Meta-Analysis (CMA) 2.0 program. The effect size of the related variables was analyzed by converting the statistic r value to Fisher's Z. Results: The overall average effect size of major satisfaction was the largest effect size (ES=.49), followed by cognitive factors (ES=.58), affective factors (ES=.45), and psychomotor factors (ES=.31). The cognitive factors were in the order nursing professionalism(ES=.70), nurse's image (ES=.65), and critical thinking disposition (ES=.36). The affective factors were self-esteem (ES=.59), emotional intelligence (ES=.55), career identity (ES=.49), self-efficacy (ES=.48), college adjustment (ES=.45), practice satisfaction (ES=.45), resilience (ES=.42), (ES=.40), grit (ES=.34), and stress (ES=.26). The psychomotor factors were clinical performance ability (ES=.38) and career search behavior (ES=.31). Conclusion: The results of this study are valuable when giving consideration to the variables related to nursing students' major satisfaction, for developing a strategic model to enhance the satisfaction of nursing students.

• Journal of the Korean housing association
• /
• v.9 no.2
• /
• pp.57-66
• /
• 1998

The purpose of this study is to provide a basic for a desirable bathroom plan of apartments. As a first step in this process, we analyzed the bathroom plans of the apartments(area: 10-69 pyung) constructed in 8 sections in Seoul from 1971 to 1995 where 65,801 households live. In this study, the numbers, location, size, and proportion of the bathroom and dressing room, and the direction of the bathroom door in apartments are examined. The major frindings are as follows; 1) We have found that the numbers of bathrooms to increase in more than 20s pyung apartment since 1990. 2) Except a master bathroom, the another one for the guest is located in enterance in more than 40s pyung apartment. 3) The door of the bathroom faces corridor in more than 40s pyung apartment. So, it is possible for them to lessen discomfortness when they coming in and out of the bathroom. 4) It was found that the size of bathroom were decreased in most cases. 5) They did not plan a dressing room in 10s pyung - 60s pyung and the size of dressing room was decreased in 60s pyung apartment.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.3
• /
• pp.284-291
• /
• 2014

Finely-striate buccinum Buccinum striatissimum, a species of whelks, is caught mainly by pot in the eastern coastal waters of Korea. In order to determine the size selectivity of pot for the species, comparative fishing experiments were conducted near Yeongil Bay from June to September in 2003 using the dome-shaped pots with different five mesh sizes (17.1, 24.8, 35.3, 39.8, and 48.3 mm). The parameters of logistic equation were estimated by the SELECT (Share Each Length's Catch Total) method based on a multinomial distribution. The model with the estimated split parameter was found to fit the catch data best. The master selection curve was estimated to be s (R)=exp (13.044R-16.438)/[1 + exp (13.044R-16.438)], where R is the ratio of shell height to mesh size. The relative shell height of 50% retention was 1.260, and the selection range was 0.168. Enlargement in mesh size of the pot allows more small-sized whelks to escape.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.4
• /
• pp.13-19
• /
• 2018

Master plan plans for new airports should estimate the approximate scale of the airside's moorings and terminals. The size of the pavilion can be determined by complex factors such as the operating hours of the operating company, the frequency of operation, and the aircraft class. Among them, the number of flights is calculated using the Horon-jeff equation because of the relationship between the number of flights and the time occupied by the mains. Since this estimation formula is a simplified formula, it is necessary to verify the appropriateness of the method of estimating the scale and to suggest improvement directions. Therefore, in this study, we propose a method of estimating the size of the western flags by investigating and analyzing the main airports of overseas airports to determine whether the application of the Horon-jeff formula is appropriate.