• Journal of Ocean Engineering and Technology
• /
• v.23 no.1
• /
• pp.54-59
• /
• 2009

In this paper, the effect of the position and size of a lumped mass on the structural stability of a high speed underwater vehicle is presented. For simplicity, a real vehicle was modeled as a follower force subjected beam that was resting on an elastic foundation, and the lumped mass effect was simplified as an elastic intermediate support. The stability of the simplified model was numerically analyzed based on the Finite element method (FEM). This numerical simulation revealed that flutter type instability or divergence type instability occurs, depending on the position and stiffness of the elastic intermediate support, which implies that the instability of the real model is affected by the position and size of the lumped mass.

• Journal of Chest Surgery
• /
• v.15 no.4
• /
• pp.402-408
• /
• 1982

The primary cardiac tumor was considered as a form of disease with poor prognosis in the past and it was hardly diagnosed before post mortem autopsy. But recent development of diagnostic procedure and the cardiac surgery using extracorporeal circulation increased the accuracy of diagnosis and the opportunity of successful treatment. The authors present two cases of left atrial myxoma which experienced during recent 4 years between 1979 and 1982. A 33 year old woman admitted with severe shortness of breath, generalized edema, ascites and the evidence of hepatopathy resulted from right sided heart failure. Preoperatively, the patient was treated with conservative medication to improve general condition for a few days. The tumor mass was removed successfully under the cardiopulmonary bypass. She, however, died of myocardial dysfunction showing low blood pressure. The tumor mass weighed 22gm and measured 5.2x4.5x3.6 cm in size. A 60 year old man admitted with shortness of breath on exertion and an episode of fainting. Following the removal of tumor mass under the cardiovascular bypass, the clinical course was satisfactory with no complication. The tumor mass weighed 105gm and measured 9x4x5 cm in size.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.15 no.4
• /
• pp.218-227
• /
• 2002

Pelvic Inflammatory Disease(PID) is a spectrum of inflammatory disorders of the female genital tract involving at least the endrometrium and may include the fallopian tubes, ovaries, and pelvic cavity. Women with PID acutely experience pain and are at risk for sepsis; however, the long-term complications such as chronic pelvic pain, organic changes like chronic salpingitis, adhesions, etc., and the significant increases in ectopic pregnancy and infertility are more important and hard to control. This study is about one patient who has chronic PID with inflammatory pelvic mass. The patient was treated with retention enema therapy which use herbs effective for reducing inflammation, resolution abdominal mass, promoting blood circulation. Also, treated with herbal medication of Danchisoyosan(丹梔逍遙散) and Moxibution at Zhongwan(中脘), Guanyuan(關元). After total treatment for three months, the patient's symptoms are improved and the size of inflammatory pelvic mass is reduced. This results indicates that the combination treatment, especially the retention enema therapy is effective on reducing symptoms of PID and the size of secondary inflammatory organic changes.

• Journal of the Korean Society of Safety
• /
• v.25 no.2
• /
• pp.1-6
• /
• 2010

Flow characteristics of differential pressure flow meters which have a shape of triangular separate bar (TSB) was investigated according to the machining conditions in pressure tapping holes. Diameter of the pressure taping holes is either 1.0 mm or 1.5 mm. Also, number of the pressure tapping holes are drilled either 9 or 17. The mass flow rate of the TSB flow meters are calibrated with a laminar flow meter by connecting them in line. The mass flow rate in the TSB flow meters are plotted with a non-dimensional parameter H which includes the gas temperature, exhaust gas pressure and differential pressure at the flow meters. An empirical correlation between the mass flow rate at the TSB flow meter and the non-dimensional parameter H was obtained. The empirical correlation showed highly linear relationship between the mass flow rate and the non-dimensional parameter H. The hole size of the pressure tapping holes has a bigger effect on the flow rate than the number of the tapping holes.

• Journal of Korea Foundry Society
• /
• v.17 no.5
• /
• pp.472-479
• /
• 1997

The effect of size and mass fraction of SiC particulate on the fatigue and wear have been investigated for semi-liquid formed SiCp/AZ91HP Mg composites. In the study, different particulate sizes of 7, 20, $50 {\mu}m$ were prepared with various mass fraction for sample preparation. By tension-tension fatigue tests, whose procedures are standardized in ASTM standard 647E-93, the da/dN vs. ${\Delta}K$ curves were obtained. Also, the crack propagation paths were observed by optical microscope. As a result of wear test, specific wear loss is decreased with increasing mass fraction and particulate size. Specific wear loss of 30 mass% $50 {\mu}m$ SiC reinforced Mg composite is compared to SKD11.

• Archives of Craniofacial Surgery
• /
• v.22 no.4
• /
• pp.214-217
• /
• 2021

Fibrofolliculoma is a benign tumor characterized by a smooth, dome-shaped papule of size 2-4 mm. Most fibrofolliculomas occur as multiple lesions, and very rarely, they are solitary. Herein, we report a case of solitary fibrofolliculoma found in the alar rim, without the typical characteristics of a fibrofolliculoma. A 42-year-old man visited the hospital with a protruding lesion that had occurred 1 year previously. A mass of size 5×7 mm was observed on the left alar rim. The tumor was dome-shaped and palpable. The patient did not have any similar lesions elsewhere. No family member was known to have such a lesion. An incisional biopsy was performed before surgery, and pathological examination revealed hyperkeratosis and dyskeratosis; however, an accurate diagnosis was not made. Complete resection was planned for the mass on the alar rim. The resected mass was subjected to permanent biopsy, and the pathological examination results led to the diagnosis of fibrofolliculoma. Therefore, when diagnosing a dome-shaped mass in the alar rim, despite the suspicion of a very rare disease, it is necessary to suspect fibrofolliculoma and consider the process from diagnostic examination to treatment.

• Journal of Veterinary Clinics
• /
• v.18 no.1
• /
• pp.88-92
• /
• 2001

A subcutaneous mass foud in a nine-year-old male Iguana (Iguana iguana) was pathologically and microbiologically examined. Grossly, this mass, measuring $2 cm{\times}1.5 cm{\times}1 cm$ in size, contained white to yellow caseous-crumbly material which was surrounded by the thin connective tissue. Histopathologically, a mass consisted of central caseous necrotic debri in which heterophils and macrophages were scattered, and peripheral fibrous connective tissue in which scattered heterophils, macrophages and lymphoid cell aggregates were present. This mass composed of central necrotic core and peripheal connective tissue did not have any detectable microorganisms including acid-fast bacteria and fungi. Histopathologically, severe atrophy of seminiferous tubules in both testicles was observed. In addition, peripheri of ductus deferens was thickened by fibrous connective tissue. This is the first report of subcutaneous caseous necrotic mass of an Iguana in Korea. In addition, the bilateral severe atrophy of seminiferous tubules may be due to fibrosis of ductus deferens.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.819-824
• /
• 2012

This paper presents the wideband vibration system of an electromagnetic vibration energy harvester that obtained electric power for wireless sensor applications from the ever-change vibrations of bridge. It is a system with two degree of freedom vibrations that are composed of two mass and two spring respectively. One system is housing mass and spring, the other is the magnetic mass and spring that is the vibration system construction's element of electromagnetic vibration energy harvester. In other words, it is called dynamic vibration absorber. This paper show that the ratio of housing mass to magnetic mass decides the bandwidth and the size of amplitude of magnetic mass in electromagnetic vibration energy harvester. Therefore, it is necessary to improve the efficiency of energy in electromagnetic vibration energy harvester for wireless sensor applications.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.3
• /
• pp.414-421
• /
• 1999

Falling film rectification involves simultaneous heat and mass transfer between vapor and liquid interface. In the present work, the adiabatic rectification process of ammonia-water vapor on the vertical plate was investigated. The continuity, momentum, energy and diffusion equations for the solution film and vapor mixture were formulated in integral forms and solved numerically. The model could predict the film thickness, the pressure gradient, and the mass transfer rate. The effects of Reynolds number and ammonia concentration of solution and vapor mixture, rectifier length, and the enhancement of mass transfer in each phases were investigated. The stripping of water in vapor mixture occurred new the entrance of ammonia solution, which imposed the proper size of an adiabatic rectifier. Rectifier efficiency increased as film Reynolds number increased and as vapor mixture Reynolds number decreased. The improvement of rectifier efficiency was significant with the enhancement of mass transfer in falling film.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.8 no.2
• /
• pp.69-79
• /
• 2000

Falling film rectification involves simultaneous heat and mass transfer between vapor and solution film. In the present work, the adiabatic rectification process of ammonia-water vapor by the falling solution film on the vertical plate was investigated. The continuity momentum, energy and diffusion equations for the solution film and the vapor mixture were formulated in integral forms and solved numerically, The model could predict the film thickness, the pressure gradient, and the mass transfer rate. The effects of Reynolds number and ammonia concentration of solution and vapor mixture, rectifier length, and the enhancement of mass transfer coefficient in each phases were investigated. The stripping of water in vapor mixture occurred near the entrance of ammonia solution, which imposed the proper size of an adiabatic rectifier. Rectifier efficiency increased as film Reynolds number increased and as vapor mixture Reynolds number decreased. The improvement of rectifier efficiency was significant with the enhancement of mass transfer coefficient in falling film.