• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.07a
• /
• pp.39-42
• /
• 1999

Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.85-95
• /
• 2018

In this research, a biofilter system equipped with a biofilter process and a humidifier composed of a fluidized aerobic and an anoxic reactor, was constructed to treat odorous waste air containing hydrogen sulfide, ammonia and VOC, frequently generated from pig and poultry housing facilities, compost manufacturing factories and publicly owned facilities. Its optimum operating condition was revealed and discussed. In the experiment of complex feed, the ammonia of fed-waste air was removed by ca. 75% and more than 20% at the stage of the humidifier and the biofilter, respectively. The toluene of the fed-waste air was removed by ca. 20% and more than 70% at the stage of the humidifier and the biofilter, respectively. Therefore the water-soluble ammonia and the water-insoluble toluene were treated mainly at the stage of the humidifier and the biofilter, respectively. In addition, hydrogen sulfide was almost absorbed at the stage of the humidifier so that it was not detected at the biofilter process. In the experiment of ammonia-containing feed, the ammonia of fed-waste air was removed by ca. 65% and 35% at the stage of the humidifier and the biofilter, respectively. Its removal efficiency of ammonia at the stage of the humidifier was 10% less than that in the experiment of complex feed, due to no supply of such carbon source as toluene required in the process of denitrification. In the experiments of complex feed, ammonia-containing feed with and without (instead, glucose) the addition of yeast extract, the absorption rates of ammonia-nitrogen were ca. 0.28 mg/min, 0.23 mg/min and 0.27 mg/min, respectively. The corresponding denitrification rates in the anoxic reactor were 0.42 mg/min, 0.55 mg/min and 0.27 mg/min, respectively. In addition, in the modeling of bubble column(the fluidized aerobic reactor of the humidifier) process, the value of specific surface area(a) of bubbles multiplied by enhanced mass transfer coefficient (E $K_y$) was evaluated to be 0.12/hr.

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.600-605
• /
• 2010

'Dagreen' (Scale cereal L.), a new rye variety was developed from the open pollination among 10 rye lines at the National Institute of Crop Science in 1995 and mass selection were made at National Institute of Crop Science from 1996 to 1999. Recurrent selections were made at Dept. Rice and Winter Cereal Crop, NICS, RDA from 2000 to 2006. This new variety has erect plant type with medium size pale green leaves. The number of spike per $m^2$ was 713 and the plant height was 103cm. The heading date of 'Dagreen' was April 24 which was 7 days earlier than that of "Koolgrazer". It was adaptable for forage use at an early stage as a whole crop. Lodging resistance was higher than that of check variety 'Koolgrazer'. The chemical components and quality of forage showed 10.2 % crude protein, 36.6 % ADF, 62.4 % NDF and 59.9 % TDN. 'Dagreen' showed high resistance to powdery mildew and leaf rust than those of check variety in the field condition. The average dry matter (7,010kg $ha^{-1}$) of 'Dagreen' harvested at April 28 were 6 % higher than 'Koolgrazer'. This variety is recommended for all of the rye cultivation area in Korea.

• The Korean Journal of Archival Studies
• /
• no.21
• /
• pp.169-246
• /
• 2009

The national records management system of the Korean Government has been developed in a close relationship with changes in the administrative system. The national records management system established immediately after the establishment of the Korean Government, began to be reformed as a system with a new feature during the quick transition of the administrative system during the early 1960s. Particularly this new system holds an important meaning in that it began to cope with the mass production system of records and was established on the government level for the first time since the establishment of the government. Also this was a basic framework that defined the records management pattern of the Korean Government for the later 40 years. Therefore, this study aims to identify the origin and the meaning of the national records management system established during the early 1960s. At the time of establishing the government, the administrative system of the Korean Government was not completely free from the framework of the administrative system of the Chosen General Government. This was mainly because the Korean Government had no capability to renovate the administrative system. This was not an exception also for the national records management system. In other words, the forms and preparation methods of official document, an official document management process, and the classification and appraisal system used the records management system of the Chosen General Government without any alteration. Main factors that brought about the reform of the national records management system as well as the change in the Korean administrative system during the early 1960s, were being created in Korean society, starting from the mid 1950s. This resulted from the growth of Korean Army, public officers, and students of administrative science as being the intrinsic elites of Korean society through their respective experience of the US administration. In particular, the reform of the creation, classification, filing, transfer, and preservation system shown during the introduction of a scientific management system of the US Army in the Korean Army was a meaningful change given the historic developing process of Korean records management system history. This change had a decisive effect on the reform of the national records management system during the early 1960s. As the Korean Army, public officers, and students of administrative science, who had posted growth beginning in the mid-1950s, emerged as administrative elites during the early 1960s, the administrative system of the Korean Government brought about a change, which was different from the past in terms of its quality, and the modernization work of documentary administration pursued during the period, became extended to the reform of the national records management system. Then, the direction of reform was 'the efficient and effective control' over records based on scientific management, which was advanced through the medium of the work that accommodate the US office management system and a decimal filing system to Korean administrative circumstances. Consequently, Various official document forms, standards, and the gist of process were improved and standardized, and the appraisal system based on the function-based classification were unified on the government level by introducing a decimal filing system.

• Composites Research
• /
• v.36 no.1
• /
• pp.1-15
• /
• 2023

Demand for energy consumption reduction is increasing according to the development expectations of future mobility. Lightweight structural materials are known as a method to reduce greenhouse gas emissions and improve energy efficiency. In particular, fiber reinforced polymer composite (FRP) is attracting attention as a material that can replace existing metal alloys due to its excellent mechanical properties and light weight. In this paper, industrial applications and research trends of carbon fiber reinforced composites (CFRP, carbon FRP) and self-reinforced composites (SRC) were reviewed based on the reinforcement, polymer matrix, and manufacturing process. In order to overcome the expensive process cost and long manufacturing time of the epoxy resin-based autoclave method, which is mainly used in the aircraft field, mass production of CFRP-applied electric vehicles has been reported using a high-pressure resin transfer molding process including fast-curing epoxy. In addition, thermoplastic resin-based CFRP and interface enhancement methods to solve the recycling issue of carbon fiber composites were reviewed in terms of materials and processes. To form a perfect matrix-reinforcement interface, which is known as the major factor inducing the excellent mechanical properties of FRP, studies on SRC impregnated with the same matrix in polymer fibers have been reported. The physical and mechanical properties of SRC based on various thermoplastic polymers were reviewed in terms of polymer orientation and composite structure. In addition, a copolymer matrix strategy for extending the processing window of highly drawn polypropylene fiber-based SRC was discussed. The application of CFRP and SRC as lightweight structural materials can provide potential options for improving the energy efficiency of future mobility.