• Journal of Navigation and Port Research
• /
• v.29 no.3 s.99
• /
• pp.203-213
• /
• 2005

The International Maritime Organization(IMO) which is responsible for measures to improve the safety and security of international shipping and to prevent marine pollution from ships is a specialized agency of the United Nations. It is involved in legal matters, including liability and compensation issues and the facilitation of international maritime traffic as well. But the ROK has not been actively coping with the environment of the shipping industry because of the absence of the organization or researching bodies that specialized in the field related to IMO. Therefore this paper investigates the maritime administration system of the major countries such as the USA, japan and the UK. And particularly by conducting IMO research and responding system, this study gathers relevant materials from those countries for the comparison and analysis with the purpose of providing the ROK with the assistance in forming the responding measures in the shipping and shipbuilding industries.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.12
• /
• pp.2917-2923
• /
• 2015

In spite of a recent trend of container ships becoming larger in size, the current circumstance is that managing reefer containers marine transportation is being mostly dependent upon manpower. Particularly, in the case of bad weather or nighttime, reefer containers are not being monitored due to lack of safety device. For the purpose of reducing such risk, IMO is recommending a system using PLC but the system is not being used. In addition, they are still relying on manpower for control and reliability of freight in transit is decreasing due to lack of information during marine transportation for every subject related to freight as well as shipper. Accordingly, the purpose of this paper is to propose a real-time reefer container management system to effectively control all reefer containers widely being used across the world.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.1
• /
• pp.22-28
• /
• 2015

The design on a riser in 1MW OTEC system is performed. The minimum diameter of the riser is decided depending on intake quantity of deep-sea water to supply an OTEC cycle. An applicable pipe material is selected from analyzing the properties of commercial pipes. The selected HDPE pipe with the low density and strength is reinforced with a lumped block attached at the end of and wire ropes along the riser. A lumped block, connected to a floating structure by wire ropes, with 25% and 50% weight of a GFRP riser is designed to be attached the end of a riser. The structural safety of the HDPE riser with wire rope supporting axial loads induced by a lumped block is analyzed under the harsh ocean environmental condition near Hawaii ocean with the numerical method. The final dimension of the riser and accessories is determined considering the economic point of view. The designed riser will be applicable to the construction of the 1 MW OTEC pilot plant.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.3
• /
• pp.160-163
• /
• 2008

$CO_2$ ocean sequestration is being considered as a way to earn a frame of time to change other industrial life pattern to overcome the global warming crisis. The method is to dilute the captured $CO_2$ into ocean by ejecting the liquefied $CO_2$ through nozzles. The main issue of such method is the effectiveness and safety, and in both problems the rising speed of those LCO2 droplet is the key parameter. In this paper, the rising speed of LCO2 droplets is numerically studied including the effect of the surfactant which can be residing along the density interface of the droplets. A front tracking method with a simple surface tension model is developed and the rising speed of the droplets is carefully investigated with varying the various parameters. It is demonstrated that the variable surface tension can change the deformation of the droplet, the flow near the interface, and the rising speed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.681-688
• /
• 2018

As environmental regulations have been strengthened and high fuel efficiency has been in demand in recent years, the number of ships using natural gas as a fuel is increasing. The demand for ships using LPG or methanol, which are emerging as eco-friendly vessel fuels, is also increasing. In this perspective, ME-LGI engines using LPG or methanol as a fuel have attracted considerable attention. Ships equipped with an ME-LGI engine are required to check the reliability of the fuel injection valve during shipping. This means that the development of a fuel injection valve tester is essential for the commercialization of ME-LGI engine. This study conducted the conceptual design of a fuel injection valve tester for ME-LGI engines using a system engineering process in the order of requirements analysis, functional analysis, and design synthesis. In the requirement analysis stage, the operating process of fuel injection valve was analyzed, and the necessity of checking the sealing oil leakage was then derived. In the functional analysis stage, the functions and flow of them were defined at each functional level. In the design synthesis stage, the equipment for each function was set and the process block diagram based on it was derived. In addition, preliminary risk analysis was performed as a part of system analysis and control, and safety measures were added to the conceptual design. This study is expected to be a good reference material for the concept design of other systems in the future because it shows the application process of a system engineering process to the conceptual design in detail.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.35-44
• /
• 2003

Considering possible legal and policy problems with regard to the Cheju Strait, a central issue is whether the Cheju Strait should be treated as Korean territorial sea or an international strait The claim that the strait is territorial sea has been based on the use of a straight baseline method of dermarcation With the use of straight baseline, Korea claims that the breadth of the Cheju Strait is only 20.7 miles at its narrowest point and therefore the strait becomes the territorial sea of Korea. The consideration cf marine pollution has weighed heavily in claiming the Cheju Strait as territorial sea. Pollution resulting from the accidents cf tankers caused by fire, collision, or stranding in the Cheju Strait and the Korea Strait would be enormous, affecting the entire coastal waters of the south coasts cf Korea's mainland and Japan's Tsushima Islands areas. Catastrophic pollution in the Cheju Strait could also come from the accidents cf large-size oil tankers passing through the Korea Strait from the Malacca Strait Although the Korean government considers the geographic and socioeconomic conditions sufficient to justify Korea's claim of the Cheju Strait as territorial sea, it believes that declaring it so would raise considerable legal conflicts with maritime states. In view of the legal difficulties and the need to meet the problems arising from the growing vessel traffic in the Cheju Strait, the sea lanes and traffic separation schemes may be considered an alternative to the internationalization of the Cheju Strait Even if the Korean government dose not do so, the regime of innocent passage should be applied to vessels passing through the Strait and should not suspend innocent passage through the Strait. Therefore, the Korean government needs to have a more legal, pragmatic, functional and managerial approach than a purely sovereign and selfish approach to the solution of legal matters of the Cheju strait For this purpose, the UN Convention on the Law of the Sea would serve as a guide and also self-restraint and cooperative approaches would become norms governing the resolution of the law of the sea issues in the Cheju Strait.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.165-170
• /
• 2005

A basic study for the development of a disk type oil skimmer for a tank lorry, compares via experiments to the oil recovery differences by material between the existing oil skimmer disk and several discs which oil adhesion are possible. The experiment results in this study are summarized as follows: In all the disks, the mass of recovery of bunker-A oil was greater than light oil. In light oil, there was nearly no differences in the mass of oil recovery by disk material, but in the case of bunker A oil, recovery efficiency showed big differences depending on the disk materials. For light oil, the differences in the mass of oil recovery per unit of operation time from the initial time zone were hardly shown. However, the mass of recovery of bunker-A oil linearly increased from the initial operation time in all the disks and the increase shaped a slow moving trend as time went on; therefore, the mass of oil recovery per unit of operation time showed differences depending on time. This result shows that oil viscosity has an effect on the disk recovery efficiency. When comparing the mass of pure oil recovery and the mass of water recovery in the total mass of recovery by bunker-A oil, there was no difference in the mass of oil recovery between the window-aluminum material disk and the disks consisting of other materials, but the mass of water recovery of the former was relatively very small. This shows the most ideal result in view of oil recovery efficiency that considers the mass of water recovery. In conclusion, it was found that aluminum is the most advantageous as the material for tank lorry oil skimmer disk.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.97-104
• /
• 2006

Though stringent guidelines are in place to protect the harbor environment, pollution from ships, from the ports terminals. Discharge from the ballast tanks of ships, though illegal, does occur. Such vessels, arriving from distant ports of call, can introduce exotic species of plants and animals, causing disruption of the local food web. Discharges rich in nitrogen can generate the rapid growth of plankton, eventually leading to a condition known as red tide that is lethal to some coastal organisms. In addition to the harbor's negative effects on marine organisms, the diesel engines of the ships and the trucks that haul cargo to and from the ports release large volumes of diesel exhaust into the atmosphere. IMO(International Maritime Organization) is strongly proceeding with adoption of a new maritime environment convention and coming into effect for regulation enhancement about the pollutants which are happened in a ship recently. Study about the conventions that our country currently comes into effect, and there is during forwarding and correspondence must be performed effectively. In this paper, International convention on the control of harmful Anti-Fouling system on ship, Ballast water management, Prevention of air pollution from ships, treat a main pending problem in ocean related environmental regulation convention.

• Journal of Fisheries and Marine Sciences Education
• /
• v.20 no.1
• /
• pp.127-134
• /
• 2008

The purpose of this study was to determine content of biogenic amines (Histamine, Cadaverine, Putrescine) in the salted mackerel, canned mackerel, mackerel pike, and freeze dried mackerel pike (Guamegi) collectively, all were purchased in the market. Salted mackerel was purchased at five markets (A, B, C, D, and F market) and stored for 10 days at $4{^{\circ}C}$. At the time of purchase, salted mackerel purchased at markets A, B and C was tested for biogenic amine, yet nothing was detected. However, salt mackerel purchased at market D was tested and the histamine concentration was 0.5 mg/100g. Mackerel from market F, exhibited content levels of 0.5 mg/100g histamine and 1.6 mg/100g cadaverine. Those make certain safety during self-life but that purchased F market gradually increased biogenic amine during storage. Prepared salted mackerel of varying levels of freshness and processing methods were analyzed for biogenic amines. Salting process was performed using functional brine salt. VBN (volatile basic nitrogen) was used to establish freshness levels of salted mackerel. Analyses of mackerel muscle determined the values of freshness to be 9.2 mg/100g (good freshness), 18.2 mg/100g (bad freshness), respectively. After 40 days of storage, the content of histamine, cadaverine, putrescine in the freshness of salted mackerel was 2.0 mg/kg, 2.4 mg/kg and 0 mg/kg, respectively. The content of histamine, cadaverine, putrescine in salted mackerel of poor freshness was 71.3 mg/kg, 22.9 mg/kg and 17.8 mg/kg, respectively. It was concluded the presence of biogenic amines during the salting process of salted mackerel significantly effected freshness of materials. The presence of biogenic amines were detected in mackerel that underwent the salting process after 1 month of storage at $4{^{\circ}C}$. The levels of biogenic amines in the brine salted mackerel were higher than those found in dry, salted mackerel; however, the freshness of fish had an insignificant effect on biogenic amines. The presence of histamine was detected in small quantities in canned mackerel and mackerel pike from three companies. Alternatively, cadaverine and putrescine were not detected. Guamegi, vacuumed packed or sealed with a rope was purchased from three markets (A, B, C seafood company). Guamegi was stored and observed for 180 days at $-20{^{\circ}C}$. Histamine was detected in small quantities in all products stored at $-20{^{\circ}C}$. Levels of histamine was dependent on the types of packaging, rope packaging yielded the highest level. However, other amines were not detected.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.688-697
• /
• 2014

In this study, electrode bonding technology needed for high density of rechargeable battery is studied, which is recently researched for electric vehicle, the small leisure vessel. For the alternative overcoming the limit of stacking amount able to be stacked by conventional ultrasonic welding, the low temperature bonding method, eligible for minimum of degeneration of chemical activator on the electrode surface which is generated by thermal effect as well as the increase of conductivity and tension strength caused by electrode bonding using filler metal, not using conventional direct heating on the electrode material method, is studied. Specifically to say, recently used more generally the ultrasonic welding and spot welding method are not usable for satisfying stable electric conductivity and bonding strength when much electrode is stacking bonded. If the electrical power is unreasonably increased for the welding, due to the effect of welding temperature, deformation of electrode and activating material degeneration are caused, and after the last packaging, decline of electrical output and generating heat cause to reduce stability of battery. Therefore, in this study, induction heating system bonding method using high frequency heating and differentiated electrode method using filler metal pre-treatment of hot dipping are introduced.