• 한국콘텐츠학회논문지
• /
• 제13권7호
• /
• pp.38-50
• /
• 2013

영화감독 양영희의 두 편의 다큐멘터리 <디어 평양>(2005), <굿바이, 평양>(2009)과 극영화 <가족의 나라>(2013)는 재일코리안 디아스포라로서 감독의 자전적 경험을 바탕으로 제작된 영화로 남북한과 일본이라는 국민국가의 틈바구니에 선 재일코리안 디아스포라 문제를 제기하고 있다. 세 편의 영화는 제주, 오사카, 평양을 횡단하며 구축된 가족의 서사를 질문하는 것을 통해 국민국가가 부과한 경계를 의심하고 '가족의 나라'라는 새로운 탈주의 공간을 모색한다. 이 글은 양영희의 영화가 분단으로 한반도에 발생한 두 개의 국민국가가 강력하게 추구하는 통합과 일체감, 조국에 대한 획일적인 교육에 긴장을 일으키고 그것을 이질화시키면서 자신의 정체성을 재조정해가는 과정을 추적하였다. 결국 이들 영화는 국민국가의 경계를 넘나드는 혼종적 정체성에서 재일코리안 디아스포라의 미래 정체성을 예견하고 있는데 이는 동북아의 평화와 공존, 남북한의 적대성을 해체하는 작업에서 요구되는 타자 수용성, 개방성, 연대성의 가능성이 재일 코리안 디아스포라에게 있음을 보여주는 것이라 할 수 있다.

• 전기학회논문지
• /
• 제58권3호
• /
• pp.614-620
• /
• 2009

The force distribution in multi-legged robots is a constrained, optimization problem. The solution to the problem is the set points of the leg contact forces for a particular system task. In this paper, an efficient and general formulation of the force distribution problem is developed using linear programming. The considered walking robot is a quadruped robot with a locked-joint failure, i.e., a joint of the failed leg is locked at a known place. For overcoming the drawback of marginal stability in fault-tolerant gaits, we define safety margin on friction constraints as the objective function to be maximized. Dynamic features of locked-joint failure are represented by equality and inequality constraints of linear programming. Unlike the former study, our result can be applied to various forms of walking such as crab and turning gaits. Simulation results show the validity of the proposed scheme.

• Current Optics and Photonics
• /
• 제4권1호
• /
• pp.23-30
• /
• 2020

This paper presents a new method for designing a lens system stable against chromatic variation at a specified wavelength. Conventional lenses are corrected for chromatic aberration, but the new method suppresses chromatic changes of the marginal ray in the image-side. By doing so, paraxial properties of the lens system are stabilized against chromatic variation. Since the new method is based on paraxial ray tracing, the stabilizing conditions against chromatic variation are given by recurrence formulas. However, there is an analytic solution for the case of a cemented doublet in the air. A stable doublet at 405 nm wavelength is designed and analyzed.

• 한국공작기계학회논문집
• /
• 제18권2호
• /
• pp.234-240
• /
• 2009

In this study, we found that it is important to have a specific management of standards which are the $12{\pm}3{\mu}m$ of plating thickness and $2{\pm}1%$ of tuning. To verify these standards, we checked the plating thickness and density of tuning through marginal valuation of each and checked size of a plating particle, adhesion of solder and condition of reflow after a section chief.

• Restorative Dentistry and Endodontics
• /
• 제8권1호
• /
• pp.155-159
• /
• 1982

The author has studied comparatively the sealing quality of conventional Z.O.E. cement, chloropercha and FR cement by means of penetration of 2% methylene blue solution through the apex of human teeth in 112 cases as the time elapsed. The results were as follows; 1. All the specimen, of which dye immersion time is three days, showed dye penetration of low degree unrelated to the kinds of root canal cement and the degree of dye penetration was increased as the time elapsed. 2. Of all the experimental group, the Z.O.E. cement group showed the lowest degree of dye penetration and the FR filling group showed the highest degree of dye penetration. 3. The degree of dye penetration of FR cement group was higher than that of the Z.O.E. cement group but lower than that of the chloropercha group.

• 한국국방경영분석학회지
• /
• 제16권2호
• /
• pp.83-95
• /
• 1990

This paper addresses the problem of determining the optimal number of spares for a system consisting of multi-item parts. In commercial sector, the cost minimization is mainly considered as an objective functions in most inventory models. However, in the military inventory systems, it is more stressed on maximizing the system availability than minimizing the system cost because the field commander always wants the system to be in perfect working condition to prepare against an emergence case. In this point of view, this paper develops an inventory model which decides the optimal number of spares by minimizing units short and simultaneously achieving a certain level of system availability. Solution algorithms are derived using the generalized Lagrange multiplier approach and marginal analysis approach. Sample data and output results are provided and sensitivity analysis is performed as the level of system availability changes in order to decide the optimal number of spares and availability in terms of economic sense.

• 대한산업공학회지
• /
• 제18권1호
• /
• pp.47-62
• /
• 1992

This paper describes a procedure for optimizing the route selection and production conditions in alternate process plans under a cellular manufacturing environment. The type of production is mainly production-to-order which deals with unexpected products as the changes factor. The flexible cellular manufacturing can be viewed as a complete unification of both flexible manufacturing process and flexible production management. The integrated problem for designing flexible cellular manufacturing associated with determining the optimal values of the machining speeds, overtime, and intercell flow is formulated as Nonlinear Mixed Integer Programming(NMIP) in order to minimize total production change cost. This is achieved by introducing the marginal cost analysis into the NMIP, which will compute the optimal machining speed, overtime, intercell flow, and routing. The application of this procedure offers greater flexibility to take advantage of the cellular manufacturing due to the optimum use of resources. A solution procedure for this problem was developed and a numerical example is included.

• Restorative Dentistry and Endodontics
• /
• 제32권5호
• /
• pp.437-444
• /
• 2007

이 연구는 거친 입자와 미세한 입자의 다이아몬드 포인트로 형성한 5급 와동에서 서로 다른 2단계 접착시스템 사용시 법랑질과 상아질 변연에서의 미세누출 차이를 상호 비교하기 위하여 시행하였다. 40개의 발거한 대구치의 협면 치경부에 각각 $106-205\;{\mu}m$의 거친 다이아몬드 포인트 (EX-41)와 $53-63\;{\mu}m$의 미세한 다이아몬드 포인트 (TF-21F)를 이용하여 20개씩 5급 와동을 형성한 후 사용된 접착시스템과 복합레진에 따라 다음과 같이 4개의 군으로 분류하였다; 1군은 EX-41 포인트로 형성한 와동에 Single Bond와 Z 250을 사용한 군, 2군은 TF-21F 포인트로 형성한 와동에 Single Bond와 Z 250을 사용한 군, 3군은 EX-41 포인트로 형성한 와동에 Clearfil SE Bond와 Clearfil AP-X를 사용한 군, 4군은 TF-21F 포인트로 형성한 와동에 Clearfil SE Bond와 Clearfil AP-X를 사용한 군으로 분류하였다. 각 군은 $5^{\circ}C$와 $55^{\circ}C$의 증류수에서 500회 열 순환한 후 2% methylene blue용액에 1일 동안 침적하였다. 각 군의 치아를 협설로 절단하여 광학 입체현미경 하에서 법랑질과 상아질 변연에서의 색소침투 정도를 관찰하여 미세누출 점수를 평가하고, 각 군 간의 유의성을 검정하여 다음과 같은 결과를 얻었다. 이 연구를 종합하면, 5급 와동에서 Single Bond는 이 연구에 사용한 다이아몬드 포인트의 종류에 따른 변연 미세누출 차이를 보이지 않았으나 Clearfil SE Bond는 거친 다이아몬드 포인트 보다는 미세한 다이아몬드 포인트를 사용하는 것이 법랑질과 상아질 변연 모두에서 낮은 미세누출을 보였다.

• 설비공학논문집
• /
• 제7권2호
• /
• pp.184-195
• /
• 1995

A theoretical one-dimensional model for the charging process in stratified thermal storage tanks is established presuming that the fluid ensuing from the tank inlet creates a perfectly mixed, layer above the thermocline. Both the generic and asymptotic closed-form solutions are obtained via the Laplace transformation. The asymptotic solution describes the nature of the charging pertaining to the case of no thermal diffusion, whereas the generic solution is of practical importance to understand the role of operating parameters on the stratification. The present model is validated through comparison with available experimental data, where they agree well with each other within a reasonable limit. An interpretation of the exact solution entails two important features associated with the charging process. The first is that an in-crease in the mixing depth $h_m$ causes a relatively slow temperature rise in the perfectly mixed region, but on the other hand it results in a faster decay of the overall temperature gradient across the thermocline. Next is the predominance of the mixing depth in the presence of the prefectly mixed region. In such a case the effect of the Peclet number is marginal and there-fore the thermal characteristics are solely dependent on the mixing depth paticularly for large $h_m$. The Peclet number affects significantly only for the case without mixing. Variation of the storage efficiency in response to the change in the mass flow rate agrees favorably with the published experimental results, which confirms the utility of the present study.

• Journal of Plant Biology
• /
• 제23권1호
• /
• pp.17-25
• /
• 1980

Kidneybean(Phaseolus vlgaris L.) and buckwheat(Fagopyrum esculentum M$\"{O}$nch) seedlings cultured with Hoagland solution to the height of 7 to 10cm in the earthern pot containing sand were used for experimental plants. One group of the plants was irrigated with Hoagland solution composed of various Al concentrations of 0 to 1,000 ppm containing 50ppm Ca, and the other group was irrigated with Hoagland solution composed of various Ca concentrations of 0 to 1,000ppm containing 100ppm Al for a month during June and July. By Al-surplus over 100ppm, the margins of backwheat leaves were curied down and turned into yellow-brown necrosis simialr to Ca-deficiency, and the old kidney bean leaves showed marginal and veinal chlorosis in addition to the early shedding of leaves. With Al-surplus of 100ppm the content of chlorophyll a and b in both plants was decreased by 30~40%. The ratio 3/1 of chlorophyll a/b was not altered by Al-surplus and Ca-deficienty at an early stage, but it was affected markedly at a final stage of growth. Leaf respiration with 100ppm Al containing 50pm Ca was slightly affected in buckwheat, but decreased by 20% in kidneybean. With Al-surplus of 100ppm the ATP content was decreased by 32% in the kidneybean leaves and by 80% in buckwheat leaves, whereas with Ca-deficiency it was decreased by 72% in kidneybean and by 90% in buckwheat. The rhythm of ATP level showed self-relience without being affected by light or temperature under the green house condition although by Al-s rplus and Ca-deficiency the ATP level of the rhythm was lower than that of control.trol.