• Structural Engineering and Mechanics
• /
• v.63 no.6
• /
• pp.809-824
• /
• 2017

The accurate evaluation of wind characteristics and wind-induced structural responses during a typhoon is of significant importance for bridge design and safety assessment. This paper presents an expectation maximization (EM) algorithm-based angular-linear approach for probabilistic modeling of field-measured wind characteristics. The proposed method has been applied to model the wind speed and direction data during typhoons recorded by the structural health monitoring (SHM) system instrumented on the arch Jiubao Bridge located in Hangzhou, China. In the summer of 2015, three typhoons, i.e., Typhoon Chan-hom, Typhoon Soudelor and Typhoon Goni, made landfall in the east of China and then struck the Jiubao Bridge. By analyzing the wind monitoring data such as the wind speed and direction measured by three anemometers during typhoons, the wind characteristics during typhoons are derived, including the average wind speed and direction, turbulence intensity, gust factor, turbulence integral scale, and power spectral density (PSD). An EM algorithm-based angular-linear modeling approach is proposed for modeling the joint distribution of the wind speed and direction. For the marginal distribution of the wind speed, the finite mixture of two-parameter Weibull distribution is employed, and the finite mixture of von Mises distribution is used to represent the wind direction. The parameters of each distribution model are estimated by use of the EM algorithm, and the optimal model is determined by the values of $R^2$ statistic and the Akaike's information criterion (AIC). The results indicate that the stochastic properties of the wind field around the bridge site during typhoons are effectively characterized by the proposed EM algorithm-based angular-linear modeling approach. The formulated joint distribution of the wind speed and direction can serve as a solid foundation for the purpose of accurately evaluating the typhoon-induced fatigue damage of long-span bridges.

• Journal of Korean Foot and Ankle Society
• /
• v.11 no.1
• /
• pp.45-50
• /
• 2007

Purpose: To evaluate the short-term clinical outcomes of total ankle arthroplasty for the post-traumatic osteoarthritis. Materials and Methods: Fourteen patients who had undergone total ankle arthroplasty from February 2005 to June 2006 were reviewed. Eleven patients were male and three patients were female. The mean age was 52.8 years (range, 33 to 69 years). The mean follow-up duration was 15.9 months (range, 12 to 24 months). Primary injuries were pilon fractures in eight cases, malleolar fractures in three, ankle syndesmotic injury in one, talus fracture and dislocation in one, and distal tibial physeal injury in one. Visual analogue scale (VAS), Range of motion (ROM), American Orthopaedic Foot and Ankle Society (AOFAS) score and complications were evaluated. Results: The mean VAS improved from 8.6 preoperatively to 2.6 at last follow-up. The mean ROM improved from 24.6 degrees preoperatively to 33.1 degrees postoperatively. The mean AOFAS score improved from 44.5 points preoperatively to 75.1 points postoperatively. Radiographically, all components were stable, but there were component malpositions in two cases, including one varus malposition of tibial component and one increased anterior translation of talar component. Complications were deep infection in one case, intraoperative malleolar fracture in three, marginal wound necrosis in two, and heterotopic ossification in one. One prosthesis was revised because of deep infection. Conclusion: Total ankle arthroplasty for the post-traumatic osteoarthritis is believed to be an useful method for preservation of the motion, relief of the pain and high satisfaction of patients in short-term results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.4
• /
• pp.860-877
• /
• 2013

Cloud computing has become one of the most important technologies for reducing cost and increasing productivity by efficiently using IT resources in various companies. The cloud computing system has mainly been built for private enterprise, but public institutions, such as governments and national institutes, also plans to introduce the system in Korea. Various researches have pointed to security problems as a critical factor to impede the vitalization of cloud computing services, but they only focus on the security threats and their correspondents for addressing the problems. There are no studies that analyze major security issues with regard to introducing the cloud computing system. Accordingly, it is necessary to research the security factors in the cloud computing given to public institutions when adopting cloud computing. This research focuses on the priority of security solutions for the stepwise adoption of cloud computing services in enterprise environments. The cloud computing security area is classified into managerial, physical and technical area in the research, and then derives the detailed factors in each security area. The research derives the influence of security priorities in each area on the importance of security issues according to the identification of workers in private enterprise and public institutions. Ordered probit models are used to analyze the influences and marginal effects of awareness for security importance in each area on the scale of security priority. The results show workers in public institutions regard the technical security as the highest importance, while physical and managerial security are considered as the critical security factors in private enterprise. In addition, the results show workers in public institutions and private enterprise have remarkable differences of awareness for cloud computing security. This research compared the difference in recognition for the security priority in three areas between workers in private enterprise, which use cloud computing services, and workers in public institutions that have never used the services. It contributes to the establishment of strategies, with respect to security, by providing guidelines to enterprise or institutions that want to introduce cloud computing systems.

• The Korean Journal of Petroleum Geology
• /
• v.4 no.1_2 s.5
• /
• pp.12-19
• /
• 1996

Directional sedimentary structures (channel structure, cross stratification, and current ripple) were observed in fine to gravelly ye.y coarse sandstones of the Cretaceous Mayans Group (lljig, Hupyeongdong, and Jeomgok formations) in the northeastern part of Euiseong subbasin of Kyongsang basin, Southeast Korea. Large and small scale channel structures are common in all formations. Trough cross-stratification and channel structure frequently occur in the lljig formation (proximal fluvial deposit), whereas planar cross- stratification, cross lamination, and current ripple occur abundantly in the Hupyeongdong and Jeomgok formations (distal braided fluvial to marginal lacustrine deposits). The paleocurrent directions inferred from a statistical analysis of total 43 directional sedimentary structures show a mean azimuth of $290^{\circ}C$ with a standard deviation of $\pm68$. It suggests that the main flow of the paleocurrents moved toward the WNW direction and the source area of the sediments would be located somewhere in the ESE direction beyond the study area.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.2
• /
• pp.135-151
• /
• 2013

This study has been carried out to analyze the sensitivity of ozone concentrations by employing different options of cumulus parameterization schemes (CPSs) and microphysics schemes in MM5 models. These sensitivity tests were applied to long-range transport case of higher ozone over Northeast Asia. Employed CPS schemes are Betts-Miller (BM), Grell (GR), Kain-Fritsch2 (KF2), Anthes-Kuo (AK), None scheme (grid scale physics only), and four microphysics used here are Simple ice, Reisner1, Reisner2, Schultz scheme in MM5. We chose two cases of high ozone long range transport case by employing both concentrations ozone level and backward trajectory model. The results showed that modeled ozone concentrations indicated about 10% differences among CPSs. Of the all options, GR and KF2 (for CPS), and Rersiner-1 and Resiner-2 (for microphysics) showed relatively good and stable variations against ensemble mean values. For both CPS and microphysics schemes, the difference of precipitation arising from different parameterization schemes was significant by itself, but the resultant ozone variations showed only marginal. But the cloud fraction differences arising from different parameterization schemes showed better correlation with ozone variations than precipitation differences, indicating that the photochemical ozone generation variations is more dominant by cloud fraction than wet removal process for high and long-ranged transported ozone cases over Northeast Asia.

• Journal of Korean Society of Rural Planning
• /
• v.1 no.2
• /
• pp.77-92
• /
• 1995

The initiative to determine farmland use has been transferred to local side under the decentralized government system in Korea. New Land Act and Rural Development Act support it. Changes in external and internal environments of Korean agriculture require to diversify farmland use. Lpcal development plan may be implemented when specific farmland use plan is prepared. However, (armland use planning has not been prepared by the local governments yet. This study aims to identify problems encountered in current farmland use and suggest directions of effective and reasonable farmland use planning relevant to local conditions. Questionnaire method was used to prove topographical differences of community land demand, Statistical analyses show that farmers desire to utilize marginal farmland for income increase. Growing grass(42.0%) and cash crops(41.7%) was greatly demanded by them. They were generally eager for developing touristic farm (52.1 % ). By topographical characteristics, the eager was greatest in coastal areas, on the contrary, it was relatively low in mountainous areas. There were more farmers who want to expand their farmland in rice farming(48.4%) or rice-horticulture farming(46.9%) areas. Potential retirer among farmers were most in suburban areas, However, it was expected that there would be the highest retirement rate in rice farming areas because of the high rate of aged farmers. Farmland use planning should be incorporated into food production policies and community people's needs for income increase and life improvement. Agriculture promotion areas must be maintained for scale optimized farming and cash crop farming as much as possible. However, minimum portion for other uses in each village or farming community unit should be adopted. Less favored areas will have to be utilized for both agriculture and non-agriculture uses. Priority can be put into touristic resorts as a non-agriculture use. Furthermore, such areas can be used for sustainable agriculture as well as for residence, industry, animal breeding.

• Journal of Environmental Science International
• /
• v.13 no.4
• /
• pp.339-347
• /
• 2004

This paper asks the question: what choice of environmental policy instruments is efficient to reduce sulfur dioxide from stationary sources\ulcorner: In Korea, command and control has been a common way of controlling $SO_2-emissions.$ When compared to the non-incentive environmental policy instrument such as command and control, economic incentive environmental policy instrument has been the advantage of making polluter himself flexibly deals with in marginal abatement cost to develop environmental technology in the long view. Therefore, the application possibility of the incentive environmental policy instrument was studied in this research to realize the countermeasure for controlling of $SO_2-emissions.$ As a result, enforcement of the countermeasure such as flue gas desulfurizer by command and control would be suitable because power generation is performed by the public or for the public in source of air pollution and thus, economic principle is not applied to the polluter. In the source of industrial pollution, enforcement of fuel tax is found to be suitable for the countermeasure for the use of low sulfur oil in terms of the flexibility of demand for the price in the long tenn. For the permissible air pollution standards applicable to all air pollutant emitting facilities, enforcement of incentive environmental policy such as bubble, off-set, banking policy or tradeable emission penn its would be ideal in long terms according to the regional characteristics and the number and scale of air pollutant emitting facilities.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.52-52
• /
• 2014

It is widely accepted that the evolution of galaxies is accelerated in dense environments. According to recent studies, however, the evolution by direct interactions between galaxies is known to be most active in a galaxy group rather than in a galaxy cluster. In particular, the central galaxy in a group is closely related to its satellites in the properties such as morphology, color and star formation rate, because those galaxies evolve together in a small-scale environment. Currently, however, it is not yet studied well whether such conformity between bright galaxies and their faint companions remains after a galaxy group falls into a galaxy cluster. Recently, Lee et al. (2014) have found that the colors of bright galaxies show a measurable correlation with the mean colors of faint companions around them in WHL J085910.0+294957, a galaxy cluster at z = 0.3, which may be the vestige of infallen groups in the cluster. As a follow-up study, we study Abell 2744, an ongoing cluster-cluster merger at z = 0.308, using the HST Frontier Fields Survey data. The cluster members are selected based on the distributions of color, size and concentration along magnitude. The correlation in color between bright galaxies and their companions is not found in the full area of Abell 2744. However, when the area is limited to the southeastern part of the Abell 2744 image, the mean color of faint companions shows marginal dependence (> $2{\sigma}$ to Bootstrap uncertainties) on the color of their adjacent bright galaxy. We discuss the implication of these results, focusing on their dependence on local environments.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.263-269
• /
• 1996

In indian agricultural , the energy use pattern has played dominant role in influencing the level of mechanization . Besides that the agro-climatic factors as well as the size of holdings do affect the degree of mechanization . Nearly 30 percent of total cultivated area is owned by l76 percent of the small and tiny land holders each owning even less than a hectare. On the other hand, about 2 percent of land owners cultivate land. These variabilitieshave greatly influenced the ownership of power sources on Indian farms. Small farmers, employ human and animal energies with the use of hand tools and animal drawn equipments. Whereases, the use of tractors, power tillers, electric motors, etc. on small farms is on a marginal scale. There are few pockets and also extensive wheat growing regions where mechanical and electrical power sources are extensively used in production agriculture leading to about 185% of cropping intensity . In that region, the animal energy is employed for on the farm transport of fertilizers, fodders and fuel to support milch animals and other household activities . Inspite of high degree of mechanization, the harvesting of crops is done by human labour with few exceptions of harvesting wheat crops by combines in few pockets. In overall assessment of mechanization, the following conclusions are drawn : ⅰ) Farm operation which show a growing trend of mechanization are (a) tillge, (b) seedling (c) Irrigation (d) Plant protection application (e) Threshing and (f) Transport . ⅱ) Crop cultivation system in respect of wheat, maize and sorghum have been greatly mechanized. ⅲ) The least mechanized cropping systems are (a) vegetable production and (b) cultivation of sugarcane, cotton, rice and pulses. ⅳ) Annual production of tractor has touched the figure of 280.000 by 1995 and the total number has crossed 1.5million on Indian farms.

• Restorative Dentistry and Endodontics
• /
• v.14 no.2
• /
• pp.5-19
• /
• 1989

The purpose of this study was to observe the microleakage of composite resin filling using several glass ionomer cements. The Class V cavities of eighty noncarious human molars were prepared at the cementoenamel juction on the facial and lingual surfaces of each tooth with a No.330 carbide bur in a high speed handpiece. The cavity dimensions were $3.0{\pm}0.5mm$ wide, $2.0{\pm}0.5mm$ high, and $1.5{\pm}0.5mm$ deep and all enamel cavosurface margins were beveled with a No.558 carbide bur in low speed handpiece. The bevel was approximately $45^{\circ}$ and 0.5-1.0mm in width. A total of the 160 cavities was divided into four groups, and then 144 cavities among them were three experimental groups and remaining sixteen cavities were control group. All of the prepared cavities were restored as follows: group 1 : Preparations were restored with there three glass ionomer cements. group 2 : Preparations were restored with a composite resin with three glass ionomer cement bases placed $0.2{\pm}0.1mm$ short of the cavosurface margin. group 3 : Preparations were restored with a composite resin with three glass ionomer cement bases extened to the cavosurface margin. group 4 : As control group, preparations were restored with a composite resin, PALFIQUE. The specimens were then thermocycled in a range of $6^{\circ}C-60^{\circ}C$ and immersed in a bath of 2.0% aqueous basic fuchsin solution for 24 hours. Dye penetration was read on a scale of 0 to 4 by Tani and Buonocore's method. The following conclusions were derived from the results obtained; 1. All groups showed significantly more leakage at the gingival margins than at the occlusal margins(p<0.0005). 2. At the gingival margins, group 1 showed less leakage than group 3(p<0.01) and group 4(p<0.0005), while group 3 exhibited less leakage than group 2(p<0.01) and group 4(p<0.0005). 3. At the occlusal margins, group 4 showed less leakage than group 3(p<0.1) and group 1(p<0.005), while group 3 exhibited less leakage than group 2(p>0.1) and group 1(p<0.025).