• 방송공학회논문지
• /
• 제13권1호
• /
• pp.109-118
• /
• 2008

텍스처 영상 압축은 JPEG과 같은 영상 압축 표준을 사용한다. 일반 텍스처 영상에는 JPEG으로도 좋은 압축 성능을 내지만 패치 텍스처 영상은 이러한 영상 압축 기술로 압축했을 때 좋은 압축 성능을 보이지 못하였다. 이를 보완하고 압축 성능을 높이기 위해 기존의 패치 텍스처 영상에 주변 화소간에 색차를 줄이기 위한 전처리 기술을 소개하고, 제안된 기술과 JPEG 압축을 순서대로 적용하였을 때 압축 성능이 23%에서 45%까지 향상됨을 보이고자 한다.

• 한국재료학회지
• /
• 제10권10호
• /
• pp.715-720
• /
• 2000

MCFC 작동온도인 $650^{\circ}C$에서 음극의 creep과 소결에 의한 구조적 변형을 막기 위해 기계적 합금법에 의한 Ni-WC분말을 합금화하여 변형에 대한 저항성을 증대시키고자 하였다. 80시간동안 어트리션 밀링을 실시한 분말은 XRD 분석결과 결정규칙이 파괴된 비정질 상을 보였다. 제조된 분말은 적당한 점도의 슬러리로 제조후 테이프 캐스팅법에 의해 green sheet를 제조하였다. 제조된 박판의 두께는 0.9mm였고, 평균 기공 크기는 $3~5{\mu\textrm{m}}$, 기공율은 55%였다. 소결체의 XRD 분석결과 2차성은 생성되지 않았으며, SEM 및 dot-Mapping image를 통해 Ni matrix 안에 W 입자가 미세하고 균일하게 분포되어 있어 고용강화 및 분산강화를 통해 Ni 음극의 기계적 특성을 향상시킬 것으로 기대된다.

• 한국토양비료학회지
• /
• 제17권2호
• /
• pp.141-146
• /
• 1984

제주도(濟州道) 토양(土壤)의 약(約)93%에 해당(該當)하는 흑색토(黑色土), 농암갈색토(濃暗褐色土), 암갈색토(暗褐色土) 및 갈색토(褐色土)의 토양단면내(土壤斷面內) 변이성(變異性) 및 순수성(純粹性)을 분석(分析)하고 토색별(土色別) 토양특성(土壤特性)에 대한 특정(特定) 신뢰구간(信賴區間)에서 주어진 정도내(精度內)에 요구(要求)되는 표본(標本)크기를 결정(決定)하고자 수행(遂行)한 결과(結果)는 마음과 같다. 1. 대체(大體)로 토양화학성(土壤化學性)은 물리성(物理性)보다 변이성(變異性)이 컸으며 토심별(土深別)로는 심토(心土)가 표토(表土)보다 컸다. 2. 갈색토(褐色土)의 변이계수(變異係數)는 토양특성(土壤特性)에 관계(關係)없이 가장 낮았다. 3. 토양통(土壤統) 설정시(設定時) 순수성(純粹性)은 갈색토(褐色土) 74.1, 암갈색토(暗褐色土) 60.8, 흑색토(黑色土) 55. 6, 그리고 농암갈색토(濃暗褐色土) 46.9% 이었다. 4. 토양특성(土壤特性)을 유의수준(有意水準) 0.00에서 모평균(母平均)의 10% 정도(精度)로 추정(推定)하는데 요구(要求)되는 표본標本)크기를 결정(決定)하였다.

• 대한의용생체공학회:의공학회지
• /
• 제26권1호
• /
• pp.9-16
• /
• 2005

One of the most important roles of a brain atlas is providing a spatial reference system in which multiple images can be interpreted in a consistent way. The brain atlase based on Western populations such as the International Consortium for Brain Mapping's 452 T-1 Weighted Average Atlas was widely used; however, they may not be the optimal choice for use with brain images from other ethnic groups, because structural differences between occidental and oriental brains have been reported. Therefore, in this study, we created an average brain atlas from 100 healthy Koreans (100 cases (M/F=53/47), 39.0±17.0 years). The purpose of this study was to make a Korean average-brain atlas and to measure its differences from a widely accepted average brain atlas built on an occidental population. The average brain atlas for Koreans was developed using widely accepted tools and procedures. The comparison between the Korean and occidental averages was performed using tissue probability maps and a registration tool, and it was shown that the global pattern of differences between the two average brains found in this work agreed with previously reported differences: Korean brains are wider and shorter in size, and smaller in volume, yet no hemispheric volume asymmetry was found.

• 대한원격탐사학회지
• /
• 제26권3호
• /
• pp.347-359
• /
• 2010

Ortho-photos provide valuable spatial and spectral information for various Geographic Information System (GIS) and mapping applications. The absence of relief displacement and the uniform scale in ortho-photos enable interested users to measure distances, compute areas, derive geographic locations, and quantify changes. Differential rectification has traditionally been used for ortho-photo generation. However, differential rectification produces serious problems (in the form of ghost images) when dealing with large scale imagery over urban areas. To avoid these artifacts, true ortho-photo generation techniques have been devised to remove ghost images through visibility analysis and occlusion detection. So far, the Z-buffer method has been one of the most popular methods for true ortho-photo generation. However, it is quite sensitive to the relationship between the cell size of the Digital Surface Model (DSM) and the Ground Sampling Distance (GSD) of the imaging sensor. Another critical issue of true ortho-photo generation using high resolution satellite imagery is the scan line search. In other words, the perspective center corresponding to each ground point should be identified since we are dealing with a line camera. This paper introduces alternative methodology for true ortho-photo generation that circumvents the drawbacks of the Z-buffer technique and the existing scan line search methods. The experiments using real data are carried out while comparing the performance of the proposed and the existing methods through qualitative and quantitative evaluations and computational efficiency. The experimental analysis proved that the proposed method provided the best success ratio of the occlusion detection and had reasonable processing time compared to all other true ortho-photo generation methods tested in this paper.

• 한국측량학회지
• /
• 제39권5호
• /
• pp.279-288
• /
• 2021

In the era of the 4th industrial revolution, smart construction, in which new technologies such as UAV (Unmanned Aerial Vehicle) are fused, is attracting attention in the construction field. However, the method of estimating earthwork volume using DEM generated by UAV survey according to practical regulations such as construction design guidelines or standard product counting is not officially recognized and needs to be improved. In this study, different types of UAV were measured and DEM was obtained using this data. The DEM (Digital Elevation Model) thus obtained was analyzed for changes in the amount of earthworks according to the size of the GSD (Ground Sample Distance). In addition, the amount of earthwork by DEM and the amount of earthwork by existing design drawings were compared and analyzed. As a result of the study, it was suggested that images with a GSD of 5cm or less are effective to generate a high-quality DEM. Next, as a result of comparing the earthwork volume calculation method using DEM and the earthwork volume based on the existing 2D design drawings, a difference of about 1% was shown. In addition, when the design earthwork amount calculated by the double-section averaging method was compared with the designed earthwork amount using DEM data by UAV survey, a difference of about 1% was found. Therefore, it is suggested that the method of calculating the amount of earthworks using UAV is an efficient method that can replace the existing method.

• 식물분류학회지
• /
• 제48권4호
• /
• pp.260-277
• /
• 2018

The evolution of chromosome numbers and the karyotype structure is a prominent feature of plant genomes contributing to or at least accompanying plant diversification and eventually leading to speciation. Polyploidy, the multiplication of whole chromosome sets, is widespread and ploidy-level variation is frequent at all taxonomic levels, including species and populations, in angiosperms. Analyses of chromosome numbers and ploidy levels of 252 taxa of Korean non-commelinid monocots indicated that diploids (ca. 44%) and tetraploids (ca. 14%) prevail, with fewer triploids (ca. 6%), pentaploids (ca. 2%), and hexaploids (ca. 4%) being found. The range of genome sizes of the analyzed taxa (0.3-44.5 pg/1C) falls well within that reported in the Plant DNA C-values database (0.061-152.33 pg/1C). Analyses of karyotype features in angiosperm often involve, in addition to chromosome numbers and genome sizes, mapping of selected repetitive DNAs in chromosomes. All of these data when interpreted in a phylogenetic context allow for the addressing of evolutionary questions concerning the large-scale evolution of the genomes as well as the evolution of individual repeat types, especially ribosomal DNAs (5S and 35S rDNAs), and other tandem and dispersed repeats that can be identified in any plant genome at a relatively low cost using next-generation sequencing technologies. The present work investigates chromosome numbers (n or 2n), base chromosome numbers (x), ploidy levels, rDNA loci numbers, and genome size data to gain insight into the incidence, evolution and significance of polyploidy in Korean monocots.

• Plant Breeding and Biotechnology
• /
• 제6권4호
• /
• pp.354-362
• /
• 2018

Maize has high food and industrial value, whereas has difficulties in research because of their complex and huge size genome. Nested association mapping (NAM) was constructed to better understand maize genetics. However, most studies were conducted using the reference genome B73, and only a few studies were conducted on tropical maize. Ki3, one of the founder lines of the NAM population, is a tropical maize. We analyzed the genetic characteristics of Ki3 by using RNA sequencing and bioinformatics tools for various genetic studies. As results, a total of 30,526 genes were expressed, and expression profile were constructed. A total of 1,558 genes were differentially expressed in response to drought stress, and 513 contigs of them come from de novo assemblies. In addition, high-density polymorphisms including 464,930 single nucleotide polymorphisms (SNPs), 21,872 multiple nucleotide polymorphisms (MNPs) and 93,313 insertions and deletions (InDels) were found compared to reference genome. Among them, 15.0 % of polymorphisms (87,838) were passed non-synonymous test which could alter amino acid sequences. The variants have 66,550 SNPs, 5,853 MNPs, and 14,801 InDels, also proportion of homozygous type was higher than heterozygous. These variants were found in a total of 15,643 genes. Of these genes, 637 genes were found as differentially expressed genes (DEGs) under drought stress. Our results provide a genome-wide analysis of differentially expressed genes and information of variants on expressed genes of tropical maize under drought stress. Further characterization of these changes in genetic regulation and genetic traits will be of great value for improvement of maize genetics.

• Smart Structures and Systems
• /
• 제29권2호
• /
• pp.301-309
• /
• 2022

Protective coatings are most widely used anticorrosive structures for steel structures. The corrosion under the coating damages the host material, but this damage is completely hidden. Therefore, a field-applicable under-coating-corrosion visualization method has been desired for a long time. Laser ultrasonic technology has been studied in various fields as an in situ nondestructive inspection method. In this study, a comparative analysis was carried out between a guided-wave ultrasonic propagation imager (UPI) and pulse-echo UPI, which have the potential to be used in the field of under-coating-corrosion management. Both guided-wave UPI and pulse-echo UPI were able to successfully visualize the corrosion. Regarding the field application, the guided-wave UPI performing Q-switch laser scanning and piezoelectric sensing by magnetic attachment exhibited advantages owing to the larger distance and incident angle in the laser measurement than those of the pulse-echo UPI. Regarding the corrosion visualization methods, the combination of adjacent wave subtraction and variable time window amplitude mapping (VTWAM) provided acceptable results for the guided-wave UPI, while VTWAM was sufficient for the pule-echo UPI. In addition, the capability of multiple sensing in a single channel of the guided-wave UPI could improve the field applicability as well as the relatively smaller size of the system. Thus, we propose a guided-wave UPI as a tool for under-coating-corrosion management.

• 센서학회지
• /
• 제32권2호
• /
• pp.110-117
• /
• 2023

Reconstructing underwater geometry in real time with forward-looking sonar is critical for applications such as localization, mapping, and path planning. Geometrical data must be repeatedly calculated and overwritten in real time because the reliability of the acoustic data is affected by various factors. Moreover, scattering of signal data during the coordinate conversion process may lead to geometrical errors, which lowers the accuracy of the information obtained by the sensor system. In this study, we propose a three-step data processing method with low computational cost for real-time operation. First, the number of data points to be interpolated is determined with respect to the distance between each point and the size of the data grid in a Cartesian coordinate system. Then, the data are processed with a nonlinear interpolation so that they exhibit linear properties in the coordinate system. Finally, the data are transformed based on variations in the position and orientation of the sonar over time. The results of an evaluation of our proposed approach in a simulation show that the nonlinear interpolation operation constructed a continuous underwater geometry dataset with low geometrical error.