• Journal of Korea Multimedia Society
• /
• v.4 no.4
• /
• pp.316-323
• /
• 2001

Gamut mapping is a technique that acts on cross-media color reproduction to transform a color between devices for the purpose of enhancing the appearance or preserving the appearance of an image. Gamut mapping essentially produces color conversion error which depends on the gamut mapping method, source and destination devices, and sample points for gamut modeling. For color space conversion between monitor colors and printer colors, empirical representation using sample measurements is currently widely utilized. Color samples are uniformly selected in the device space such as CMY or RGB, represented as color patches, and then measured. However, in the case of printer, these color samples are not evenly distributed inside the printer gamut and the color conversion error is increased. Accordingly, this paper introduces a equally distributed color sampling method in CIELAB space, a device- independent color space, to reduce color conversion error, and the performance is analyzed via color space conversion experiments using three-dimensional interpolation.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.4
• /
• pp.109-117
• /
• 2010

With the advent of new technologies such as HSDPA, WiBro(Wireless Broadband) and personal devices, we can access various contents and services anytime and anywhere. A location based service(LBS) is essential for providing personalized services with individual location information in ubiquitous computing environment. In this paper, we propose mapping algorithm for error compensation of indoor localization system. Also we explain filter and indoor localization system. we have developed mapping algorithms composed of a map recognition method and a position compensation method. The map recognition method achieves physical space recognition and map element relation extraction. We improved the accuracy of position searching. In addition, we reduced position errors using a dynamic scale factor.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.2 s.34
• /
• pp.49-57
• /
• 2005

In this paper. a CLB-based CPLD low power technology mapping algorithm for trade-off is proposed. To perform low power technology mapping for CPLD, a given Boolean network has to be represented to DAG. The proposed algorithm consists of three step. In the first step, TD(Transition Density) calculation have to be Performed. Total power consumption is obtained by calculating switching activity of each nodes in a DAG. In the second step, the feasible clusters are generated by considering the following conditions : the number of output. the number of input and the number of OR-terms for CLB within a CPLD. The common node cluster merging method, the node separation method, and the node duplication method are used to produce the feasible clusters. The proposed algorithm is examined by using benchmarks in SIS. In the case that the number of OR-terms is 5, the experiments results show reduction in the power consumption by 30.73$\%$ comparing with that of TEMPLA, and 17.11$\%$ comparing with that of PLAmap respectively

• The KIPS Transactions:PartD
• /
• v.19D no.1
• /
• pp.81-94
• /
• 2012

FORM(Feature-Oriented Reuse Method) is one of representative product line engineering methods. The essence of FORM is the FORM architecture models, which can be reused in the development of multiple products of a software product line. The FORM architecture models, however, have the following problems when applied in practice. First, they are not standardized models like UML(Unified Modeling Language) and therefore they can be constructed only through a specific modeling tool. Second, they do not represent architectural variability explicitly. Instead their variability is only managed through a mapping from a feature model. To address these two problems, we developed at first a method for representing the FORM architecture models using UML, which enables the FORM architecture models to be constructed through various available UML modeling tools. Also, we developed an effective method for representing as well as managing the variability of the FORM architecture models through a mapping from a feature model.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.2
• /
• pp.1-10
• /
• 2002

This paper presents the new template based human face recognition methods to improve the recognition performance against scale and in-plane rotation variations of face images. To enhance the recognition performance, the templates are generated by linear or nonlinear operation on multiple images including different scales and rotations of faces. As the invariant features to allow for scale and rotation variations of face images, we adopt the affine transformation, the log-polar mapping, and the log-polar image based FFT. The proposed recognition methods are evaluated in terms of the recognition rate and the processing time. Experimental results show that the proposed template based methods lead to higher recognition rate than the single image based one. The affine transformation based face recognition method shows marginally higher recognition rate than those of the log-polar mapping based method and the log-polar image based FFT, while, in the aspect of processing time, the log-polar mapping based method is the fastest one.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.654-659
• /
• 2001

A new non-contact method of the frost thickness measurement has been developed. The method is based on the digital image processing technique to identify the reflection edge of the image captured by a CCD camera under laser sheet light illumination. To insure the accuracy of frost layer thickness, an in-situ calibration procedure is carried out with a calibration target with 0.5mm holes. Using the mapping function obtained by the calibration procedure, the contour of frost surface can be estimated with sub-pixel resolutions. The developed method is applied to study the effect of cooling plate temperature on the frost thickness in a small low speed wind tunnel.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.340-340
• /
• 2006

Applying force-distance curve measurement by atomic force microscopy to a theoretical mechanical model gives us elastic properties of polymer surfaces. Our group focuses on force-mapping method, in which force-distance curve is performed at each lattice point on a sample surface and subsequently a variety of properties derived from analytical results are combined to construct a 2-dimensional image. With this method we succeeded in deriving Young' s modulus distribution map method of rubbery/rubbery polymer blend surfaces with ${\sim}100\;nm$ lateral resolution. We also applied force-mapping method to another theory to divide distribution of hardness from that of adhesion. We will demonstrate recent progress.

• Structural Engineering and Mechanics
• /
• v.28 no.4
• /
• pp.461-477
• /
• 2008

An adaptive finite element method for analyzing two-dimensional and axisymmetric nonlinear elastic fracture mechanics problems with cracks is presented. The J-integral is used as a parameter to characterize the severity of stresses and deformation near crack tips. The domain integral technique, for which all relevant quantities are integrated over any arbitrary element areas around the crack tips, is utilized as the J-integral solution scheme with 9-node degenerated crack tip elements. The solution accuracy is further improved by incorporating an error estimation procedure onto a remeshing algorithm with a solution mapping scheme to resume the analysis at a particular load level after the adaptive remeshing technique has been applied. Several benchmark problems are analyzed to evaluate the efficiency of the combined domain integral technique and the adaptive finite element method.

• Communications of the Korean Mathematical Society
• /
• v.25 no.4
• /
• pp.583-607
• /
• 2010

The purpose of this paper is to prove strong convergence theorems for common fixed points of two families of weak relatively nonexpansive mappings and a family of equilibrium problems by a new monotone hybrid method in Banach spaces. Because the hybrid method presented in this paper is monotone, so that the method of the proof is different from the original one. We shall give an example which is weak relatively nonexpansive mapping but not relatively nonexpansive mapping in Banach space $l^2$. Our results improve and extend the corresponding results announced in [W. Takahashi and K. Zembayashi, Strong convergence theorem by a new hybrid method for equilibrium problems and relatively nonexpansive mappings, Fixed Point Theory Appl. (2008), Article ID 528476, 11 pages; doi:10.1155/2008/528476] and [Y. Su, Z. Wang, and H. Xu, Strong convergence theorems for a common fixed point of two hemi-relatively nonexpansive mappings, Nonlinear Anal. 71 (2009), no. 11, 5616?5628] and some other papers.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.6
• /
• pp.441-451
• /
• 2007

In this paper, the method to modify a surface through three dimensional vector field technique is presented, In this method two guide surfaces are required as a shape reference. One is the shape of original surface, the other is the target shape for the result surface. Proposed method is consists of two steps. The first step is to calculate the mapping points on original and target guide surfaces so that the shape error may be minimized. The second step is to construct the smooth vector field from mapping points of the first step. The developed method is applied to shoe design system which makes the surface modeling very easy and effective.