• 대한안전경영과학회지
• /
• 제9권3호
• /
• pp.15-19
• /
• 2007

This paper proposes a maintenance method to integrate worker's safety concerns into the process activities of the manufacturing system and it is to be considered as a part of the scope of maintenance engineering. The proposed method incorporates worker's health and safety considerations into maintenance engineering in each of the manufacturing process using reliability analysis. It can help to make a better planning and implementation of maintenance activities for the manufacturing system.

• Design & Manufacturing
• /
• 제9권2호
• /
• pp.6-9
• /
• 2015

The objective of manufacturing knowledge sharing platform is to convert the production experience like a worker's know-how into quantitative values, to construct database of the process technologies and to share the technologies systematically via web portal service. In addition, the knowledge sharing platform contains the total production processes of automobile and mobile products such as information of experts, facilities, and cutting-edge R&D outputs. Automobile, telecommunication mobile, and semiconductors account for a large amount of Korea's export industry rate. These industries need production technology which is a result of converting worker's know-how and R&D. Manufacturing knowledge portal aims to enable transforming production experience such as worker's know-how into standardized form for constructing database and sharing technologies systematically. Manufacturing knowledge portal can contribute to small and mid-sized manufacturing companies with further improvements.

• 한국환경보건학회지
• /
• 제14권2호
• /
• pp.13-27
• /
• 1988

Two asbestos slate manufacturing and seven asbestos textile plants in Korea were surveyed from May 20 to July 2, 1987. The purposes of this study were to evaluate 1) worker exposure to asbestos, 2) compliance to the standards and 3) the efficiency of existing local exhaust systems. Sixty-two personal samples and eighty-three area samples were collected and analyzed using "NIOSH 7400" method. Results of this study were as follows. 1. The asbesots exposure concentrations in asbestos textile plants were 1.3 - 14.3 fibers/cc(geometric mean(GM), 4.4 fibers/cc). 2. Worker exposure level to asbestos fiber in asbestos slate manufacturing industry was 0.21 fibers/cc during wet processing, which is below the Korean Standard of 2 fibers/cc. 3. Most local exhaust systems installed in asbestos textile plants were inadequately designed. 4. Ninety-six percent of the 145 samples exceeded the U.S. Occupational Safety and Health Administration (OSHA) Permissible Exposure Limit (PEL) of 0.2 fibers/cc and forty-nine percent of the samples exceeded the Korean Standatd of 2 fibers/cc.

• Journal of Preventive Medicine and Public Health
• /
• 제28권2호
• /
• pp.497-510
• /
• 1995

This study was carried out to assess work ability of manufacturing workers and managerial workers. Subjects were 446 manufacturing workers and 278 managerial workers employed in Gumi industrial complex and the observation period was for 1 month(February to March), 1995. In this study, as a questionnaire for the assessment of work ability, we used the Work Ability Index(WAI) which was developed by Institute of Occupational Health in Finland. Major findings obtained from this study were as follows ; WAI was poor in lower economic condition, shift work, irregular diet group(p<0.05). There were no evident trends of WAS in sex, educational level, obesity index, exercise, smoking, and alcohol drinking. In the groups of sensitive to perception of stress, other industrial classification except textile and electronics, the more than 9 hours work, the evident trends of poor WAS were observed(p<0.01). In the groups of $30\sim39$ years old, $40\sim49$ years old, unmarried, high school, shift work, standard body weight, and regular .diet, WAI between manufacturing workers and managerial workers was significantly different(p<0.01) and WAI of managerial worker was worse than that of manufacturing worker.

• 한국산업보건학회지
• /
• 제29권2호
• /
• pp.226-235
• /
• 2019

Objectives: The purpose of this study was to investigate whether there were differences in manufacturing industry worker's health issues depending on job stress, fatigue, and health and safety services. Methods: The purpose of the questionnaire survey and its contents were explained to manufacturing industry health personnel, and the questionnaires were collected from 666 workers from 17 manufacturing workplaces. Questionnaires with missing data were excluded from the analysis so a total of 632 questionnaires were included. Results: Overall, 74.1% of the respondents had experienced health issues during the preceding month. The factors affecting worker health were number of workers(OR=1.000034, p=.013), job demand(OR=1.82, p=.009), MFS(OR=1.85, p=.003), provision of safety & health information(OR=1.85, p=.048), wearing protector(OR=2.58, p=.021). Conclusion: It is necessary to strengthen the safety and health education to mitigate hazardous and risk factors. Employers should provide health managers in charge of safety and health education to control workplace risk factors. In case of small businesses, it may be necessary to strengthen safety and health education in existing worker health centers and government support projects.

• 대한안전경영과학회지
• /
• 제16권2호
• /
• pp.71-80
• /
• 2014

The occupational injury and illness(OII) was influenced by the various factors. This study was planned to investigate the pathway of the activities of OSHM on the rate of OII via worker's participation. The survey on the trend of the activities of OSHM was used. The sample size of manufacturing industry was 3,000 enterprises and that of construction was 1,000 enterprises. The survey was done by interview method with structure questionnaire. Questions about the activities of OHSM were integrated into one category using factor analysis. The enterprises with OII has more activities of OSHM than that without OII. Among enterprises with OII, the level of the activities of OSHM was positively correlated with the rate of OII. The activities of OSHM has influenced on the rate of OII directly and indirectly via worker's participation and the activities of prevention of accident. Worker's participation also has the direct effect and indirect effect on the rate of OII. Worker's participation in construction sector has more effect on OII than that in manufacturing sector.

• 한국산업보건학회지
• /
• 제31권4호
• /
• pp.295-303
• /
• 2021

Objective: Paint manufacturing industry workers are exposed to various lung cancer carcinogenic substances including hexavalent chromium and crystalline silica. Studies have been conducted on lung cancer in Paint manufacturing industry workers and the concentration of hexavalent chromium in paint industry; however, the concentration of crystalline silica and hexavalent chromium and cases of lung cancer in a single Paint factory has never been reported in Korea. Methods: To determine whether the cancer was related to his work environment, we assessed the level of exposure to carcinogens during pouring and mixing talc and pigment. In addition, a mask fit test was performed for the worker. Results: Analysis of talc and silica bulk powder materials showed that crystalline silica (quartz) was 5% in talc and 100% in silica. The green and yellow pigments contained 87% and 92% of lead chromate, respectively. Our quantitative analysis of pigment powder samples showed that the hexavalent chromium contents quantified in the green and yellow pigment samples were 87% and 92%, respectively. In order to estimate his exposure level of hexavalent chromium, we measured a personal exposure level of hexavalent chromium for a worker in accordance with the National Institute for Occupational Safety and Health #7605 method. The results showed that the worker was exposed to the high level of hexavalent chromium (0.033 mg m-3). In addition, the talc powder also contained 5% quartz, and the worker's exposure level to respirable quartz exceeded OEL. As a result of the respiratory protection fit test for workers, the overall Fit Factor was '15' when wearing a second-grade mask and '25' when wearing a first-grade mask, significantly lower than the US Occupational Safety and Health Agency (OSHA) pass value of "100". Conclusion: Workers who pouring and mixing powder materials such as talc or colored pigments in paint manufacturing company may be exposed to high concentrations of carcinogenic substances. These findings indicate that it is necessary to local ventilation system inspection, safety and health education for employers and workers, and periodically monitoring and manage the working environment.

• 한국산업보건학회지
• /
• 제23권2호
• /
• pp.57-64
• /
• 2013

Objectives: Skin exposure to diisocyanates may be an important risk factor for respiratory sensitization to leading asthma. However little is known about the extent of worker's diisocyanates skin exposure and the effectiveness of personal protective equipments in polyurethane foam manufacturing companies. This study provides data on diisocyanates skin exposure, surface diisiocyantes contamination of foams and the effectiveness of personal protective gloves in five polyurethane foam manufacturing companies. Materials and methods Colorimetric SWYPE pads are used for the determination of diisocyanates on surfaces of workers skin and polyurethanes foams. Results: The forearms, necks and faces of workers in polyurethane foam manufacturing companies were found to be contaminated with diisocyanates. Heavy contamination with uncured diisocyanates at large block foams surfaces were found. Personal gloves of workers for skin protection showed significant penetrations by diisocyanates. Conclusions: We found that all workers in polyurethane foam manufacturing companies could be exposed to diisocyanates by skin exposure. Also further researches which would better quantify skin exposure are needed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.11-21
• /
• 1992

Modern manufacturing process requires machine intelligence to meet the demands for high technology products as well as intelligence-based operating skills to lessen human worker's intervene. To meet this trend there has been wide spread interest in applying artificial neural network(ANN) to the areas of manufacturing process monitoring and control. This paper addresses application problems in such processes as welding, assembly, hydroforming process and inspection of solder joints.

• Journal of Preventive Medicine and Public Health
• /
• 제25권3호
• /
• pp.269-286
• /
• 1992

The purpose of this study is to investigate the present state of worker's recognition and attitude about hazard materials and occupational disease in his workplace. In general worker's view of hazard materials and occupational disease that sis recognition and attitude is related to worker's health behavior for preventing occupational disease and improving his health status. The study subject is composed of workers in the asbestos related industry for example brake lining manufacturing industry, asbestos fiber manufacturing industry, and asbestos slate manufacturing industry. The result of the study are follows : 1. The most of workers in the asbestos related industry have taken health education and safety education, and the more than half of workers recognized the usefulness of preventive device, and ventilatory device in workplace. 2. About 70% of workers have always taken the preventive device. 3. About 80% of workers have recognized occupational disease in the asbestos related industry, and about 64% of workers have recognized that hls workplace have harmful effect on his health. 4. Recognition about the usefulness of ventilatory device in work place has not related with any variables. But recognition about the usefulness of repiratory protector has related with recognition of hazard materials in his workplace, for example asbestos. 5. Attitude about severity and susceptability of occupational disease in the asbestos related industry have related with knowledge about hazard materials and occupational disease.