• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.7-7
• /
• 2007

Laser-irradiation-induced crystallization of as-deposited amorphous precursor films constitutes an integral step in fabricating LTPS TFTs. Consideration of various factors leads one to conclude that, for display manufacturers, choosing how to crystallize the films can be identified as being tactically and strategically significant. This paper will begin by reviewing the fundamental aspects of laser crystallization, and then present noteworthy advances and progress, which have recently been accomplished in the field. In particular, we will focus on communicating the evolving status associated with the sequential lateral solidification (SLS) method, which can be presently identified as the most strategically enabling crystallization method.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.4
• /
• pp.34-38
• /
• 2019

Multilayered high-temperature superconductor coated conductor (CC) tapes are used in an extensive range of applications and are exposed to many stresses such as hoop stress, radial/transverse tensile stress under large Lorentz forces, and thermal stress while cooling if thermal expansion properties differ. Loads induced transversely at the tape surface inevitably create delamination phenomena in the multilayered CC tapes. Thus, delamination behaviors of CC tapes along the c-axis under transverse loading conditions, which can vary based on manufacturing process and constituent layers, must be characterized for applications. The anvil test method was used to mechanically investigate the delamination characteristics of various commercially available Ag-stabilized CC tapes at room temperature and 77 K, finding superior strength at the latter. The wide variations found depended on tape structure and fabrication technique. Fractographic morphologies of delaminated tapes supported the findings under transverse loading conditions.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.17-18
• /
• 2015

In manufacturing industry, image scanning technique has made enormous progress in past decades. 3D models have been also very important to continuously monitor the related spatial information for freeform buildings. The process of shape making of 3D scanning is as follows: mesh surface segmentation, NURBS surface generation, and parametric solid model generation. We will review the process and applying process. Especially in the construction industry, 3D data collection by laser scanning has become an high quality 3D models. Therefore, in this research, we have an effort to review construction of reverse design process for freeform envelope using 3D scanning. The technology enables many 3D shape engineering and design parameterization of reverse engineering in the construction site.

• Journal of computational fluids engineering
• /
• v.12 no.4
• /
• pp.38-43
• /
• 2007

Owing to the rapid progress in manufacturing technology of microscale devices, there are active research works in developing microscale propulsion systems. In this study, gas flows in nozzles with size of milli and sub-millimeter are investigated by using a CFD code based on the Navier-Stokes equations. The prediction results were compared with theoretical results of quasi-one-dimensional nozzle flow and experiment data. In general, theoretical values agree very well with the CFD results. However, theoretical values begin to deviate from the CFD and experimental data for relatively small Reynolds numbers and the nozzle shape with rectangular cross section. The primary reason for this discrepancy is due to the existence of the thick boundary layer at the wall in low Reynolds flows.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.43
• /
• pp.393-408
• /
• 1997

In the early 1990s, as Korean automobile industry has made rapid progress due to favorable trend in domestic demand and steady increase of export it is very important to analyze the extents of competitiveness and the trends of change in the field of production. In this dissertation, the current situation of our competitiveness and its changes in the field of production are synthetically reviewed through examining productivity and quality, that is output, as well as other overall factors related in the process of production. And this analysis reassures that first of all, our prior tasks lie in the quality and volume of production, and we should develope competitiveness through multilateral innovation of management Now in order to meet these prior tasks, we must secure our own technology design and ability for innovaton ; enlarge overseas local production technical tie-up with leading companies and develop M&A for globalization ; improve price competitiveness, construct cooperation of labor and capital, and improve the structure of finance for innovation of management saving the cost ; establish the new method of production for the preparation of increasing overseas investment in near future.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.737-740
• /
• 2006

A cement which is used in construction and a concrete which is a hydration product of cement is considered anti-environmental materials because of lots of $CO_2$ emission in progress of producing and making them. But a concrete absorbs the $CO_2$ gas in atmosphere after hydration and in its lifetime. Based on Papadakis' theses, this research is carried on calculation of the $CO_2$ absorption quantity in concrete. Also, the emission of $CO_2$ was calculated by cement manufacture. As a result, It is said that the $CO_2$ which was emitted during cement manufacturing, was absorbed the 53% of emission quantity by the carbonation of concrete.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2140-2142
• /
• 2003

Recently, TCP/IP on Ethernet protocol is in use environment of LAN have developed a single chip by hardware. Therefore, the study about the single chip applies to the system control application like information electronic appliances, manufacturing automation machine has been made progress. This paper is the development of experimental Client node and Serve node that can transfer input-output data needed on Network Control System Client node is a sensor part of control system, that is, an analog signal is applicable to output data convert AD through LAN. Server node data sended in client convert DA, and then it is applicable to driver of Control System, so it achieves its part. In this study, is prove that using TCP/IP construct Network Control System.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.555-560
• /
• 2008

Korean Train Express (KTX) has been commercially operating and achieving elevation on transport capacity since 2004. And HSR-350x was developed and succeeded in testing of running over 350km/h. The new high-speed train development project, HEMU-400x project, has started since last year. To develop the train system, it is important how we progress the configuration of the system, design, manufacturing and test verification. The authors devised the performance estimate and verification process of the HEMU-400x and the project is performed following the developed processes.

• Progress in Superconductivity and Cryogenics
• /
• v.22 no.4
• /
• pp.24-30
• /
• 2020

The test results of the ITER toroidal field conductors demonstrated a decrease of the current sharing temperature (Tcs) with an increase in the number of electromagnetic cycles in general. This is associating with several factors. One of them is the superconducting Nb3Sn filaments cracking and another one is the redistribution of the relative deformation of the Nb3Sn strands under Lorentz forces. Despite these factors, some conductors have shown the absence or significantly less degradation of Tcs during electromagnetic cycling. This article considers another possible reason for a more stable conductors Tcs behavior, namely, the local compression of Nb3Sn wires in the cross section of a conductor. In this article presents the results of a quantitative analysis Nb3Sn superconducting filaments cracking of strands extracted from a conductor that has passed electromagnetic cycling and the model of a conductor compaction, as well as calculation results based on this model are presented also.

• Journal of the Korean Chemical Society
• /
• v.67 no.3
• /
• pp.165-174
• /
• 2023

The development of all-solid-state batteries (ASSBs) has been gaining attention in recent years due to their potential to offer higher energy densities, improved safety, and longer cycle life compared to conventional lithium-ion batteries. However, several challenges must be addressed to achieve the practical application of ASSBs, such as the development of high-performance solid-state electrolytes, stable electrode-electrolyte interfaces, and cost-effective manufacturing processes. In this review paper, we present an overview of the current state of ASSB research, including recent progress in solid-state electrolyte and cathode/anode materials, and cell architecture. We also summarize the recent advancements and highlight the remaining challenges in ASSB research, with an outlook on the future of this promising technology.