• 한국CDE학회논문집
• /
• 제21권2호
• /
• pp.204-214
• /
• 2016

Shipbuilding process takes a long time for producing final products, and needs many different resources. Because of these characteristics, it has been studied about shipyard simulation and virtual manufacturing that is able to implement the virtual manufacturing process. However, among the previous researches, it requires considerable time and effort to construct simulation model since the systematic methodology has not been used for simulation modeling. Also, reusability of constructed simulation model was low. Therefore, this research defines the method to construct shipyard simulation system using the process-centric simulation modeling methodology and shipyard simulation framework. This paper also validates the utility of this methodology through applying to construct simulation model for the shipyard master plan validation.

• 산업공학
• /
• 제10권1호
• /
• pp.15-22
• /
• 1997

In semiconductor manufacturing, the probe process between fabrication and assembly process is constrained mostly by the equipment capacity because most products pass through the similar procedures. The probe process is usually performed in a batch mode with relatively short cycle times. The capability of the probe process can be determined by the optimal combination of the equipments and the products. A probe line usually has several types of equipment with different capacity. In this study, the probe line is modeled in terms of capacity to give the efficient planning and control procedure. For the practical usage, the hierarchical capacity planning procedure is used. First, a monthly capacity plan is made to meet the monthly production plan of each product. Secondly, the daily capacity planning is performed by considering the monthly capacity plan and the daily fabrication output. Simple heuristic algorithms for daily capacity planning are developed and some experimental results are shown.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 1999년도 학술대회지 vol.2
• /
• pp.607-614
• /
• 1999

In this paper, we demonstrate the implementation case using component based development tool under development process for application developments. The tool suggested provides the programming environment for the development of distributed manufacturing applications primarily. The development tool is classified into visual component, logic component, data component, knowledge component, neural net component, and service component which is a core component for the support component edit and execution. We applied the tool to the domain of the design and routing plan to retrieve existing similar design models in database, initiate a model, generate a process plan, and store the new model in the database automatically. Utilizing the tool, it integrates a geometric modeler, engineering/manufacturing database, and knowledge sources over the Internet.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2003년도 학술대회지
• /
• pp.19-26
• /
• 2003

담배 제조공장의 노후화에 직면하여 경쟁력 확보, 현대화, 합리화, 환경친화 둥을 실현하고자 신제조창 사업이 구상되었으며, 이러한 목표 실현을 위해 사업 초기단계의 적절한 계획 및 검토가 필요하게 되었고, 이에 따라, 초기단계에 CM을 도입하게 되었다. 건물, 대지 등에 대한 타당성 검토, 공장건설 기본계획 수립 및 제조시설의 선정, 건설공사 발주용 입찰안내서 작성 등의 설계 전 업무부터 준공 후 유지관리까지 사업 전반에 걸쳐 CM업무를 수행하였다. 영주 신 제조창 CM은 다른 턴키프로젝트와는 달리 기본설계 이전에 분야별 전문성이 확보된 CM단이 조직되어 활동을 시작하였다. 이에 따라 본 연구에서는 사례프로젝트의 설계 전 단계에서 실제 수행된 CM업무들을 분석${\cdot}$평가한다. 이를 통해 설계 전 단계 CM업무의 중요성을 강조하고, 향후 CM 투입 시점이 설계 전 단계로 변화하는데 일조하고자 한다.

• 산업경영시스템학회지
• /
• 제25권5호
• /
• pp.22-30
• /
• 2002

Our study emphasizes the importance of the review of the manufacturing industry in order help them make right decision and despite many previous methods for analyzing productivity, we were coming to analyze the efficiency of the industry with Date Envelopment Analysis(DEA). Conclusively, only 4 companies is found to manage their companies effectively among 20 top-ranking companies and there was no any correlation and through the result we could realize that the result analyzed by "DEA" don't exactly match financial rates which means that corporation's management is inefficient. We are quite sure that our study can be approved materials for Benchmarking and Management establishing strategic plan.egic plan.

• Industrial Engineering and Management Systems
• /
• 제7권2호
• /
• pp.113-125
• /
• 2008

This paper presents a model for designing cellular manufacturing systems (CMS) by integrating system cost, machine reliability, and preventive maintenance (PM) planning. In a CMS, a part is processed using alternative process routes, each consisting of a sequence of visits to machines. Thus, a level of 'system reliability' is associated with the machines along the process route assigned to a part type. Assuming machine reliabilities to follow the Weibull distribution, the model assigns the machines to cells, and selects, for each part type, a process route which maximizes the overall system reliability and minimizes the total costs of manufacturing operations, machine underutilization, and inter-cell material handling. The model also incorporates a reliability based PM plan and an algorithm to implement the plan. The algorithm determines effective PM intervals for the CMS machines based on a group maintenance policy and thus minimizes the maintenance costs subject to acceptable machine reliability thresholds. The model is a large mixed integer linear program, and is solved using LINGO. The results point out that integrating PM in the CMS design improves the overall system reliability markedly, and reduces the total costs significantly.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2000년도 춘계공동학술대회 논문집
• /
• pp.534-537
• /
• 2000

Recently, A manufacturing formula centered of the customer is one of the most important parts for the company competition. Especially, it is the matters of weight and importance that Make to Order(MTO) and Make to stock(MTS) is considered at the same time for designing manufacturing system based the order effectly. This paper suggests a alternative Available to promise(ATP) and capable to promise(CTP) to confirm the delivery time to customer, how to link mid-long term production plan with short term daily based scheduling, how to relate middle processes of device based industry to mid-long term plan through the example of S company in a manufacturing formula mixed MTO and MTS

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 춘계학술대회 논문집
• /
• pp.359-363
• /
• 1992

As the demands of manufacturing automation is increasing, lots of efforts are devoted to the applications of Computer Integrated Manufacturing(CIM) concept in manufacturing shop floor. A workstation is a computer which controls differnet machines in the low level of factory(shop floor). A workstation can be utilized efficiently to enhance the coopetative work of machines. A scheduler is a component program in a workstation and it controls the operation of machines according to a fixed plan. A scheme for the scheduler has been developed for selected machines and software has been made. The fixed plan is stored in a schedule file which keeps machine names, communications methods, information for communications and time for the usages, etc. The scheduler carries out its role by the information in the schedule file. Although the developed software has some Iimitations, the test results show that the scheduler can be applied easily to the automation of the low level of factory.

• 대한안전경영과학회지
• /
• 제18권2호
• /
• pp.1-8
• /
• 2016

This study organizes not only the middle-long term developing plan of safety health education to put emphasis on a manufacturing industry, but also the developing plan of activating the domestic safety health education. On the basis of this study, current safety health education can be developed. To achieve a goal of implementing domestic safety health education, this study is carried out more deeply as follows.

• 한국산업정보학회논문지
• /
• 제8권1호
• /
• pp.1-8
• /
• 2003

There are many statistical evaluation methods, A more technical Perspective is needed in estimating the effect of the Manufacturing Process for improving the Productivity, Process network analysis is a technique which has the potentiality for a wire use to improve the manufacturing process which other techniques can't be used to analyze effectively. The concept of six sigma plan was developed and pursued by Motorola to improve the process control. The goals of six sigma plan are established on the foundation of customer satisfaction such as Quality, Cost Delivery and Service This paper presents how to improve the manufacturing process by statistical process control for the evaluation of six sigma level.