• Analytical Science and Technology
• /
• v.27 no.5
• /
• pp.248-253
• /
• 2014

This study aimed to evaluate the effects of exposure to manganese (Mn) and lead (Pb) on immune system. The subjects were 42 male workers, among whom 13 office workers (Group I) had never been occupationally exposed to heavy metals, 21 were worked in manufacturing factories (Group II) and 8 were welders (Group III). The mean blood Mn and Pb level by groups were significantly different. The numbers of CD19+ and total lymphocytes in Group I were significantly higher than those in other groups, but no significant differences were found in other T lymphocytes subpopulation. Mn and Pb concentrations showed negative correlation with T lymphocytes subpopulation, but Mn concentrations were statistical significances with T lymphocytes subpoplation except CD4+CD45RO+ and natural killer cell. Pb concentration was only statistical significance with total lymphocytes. Our results suggest that occupationally exposed to Mn and Pb can affect the cellular immune response.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.9
• /
• pp.122-129
• /
• 2004

An accurate thrust measurement is one of the critical paths to the successful test and evaluation program of small liquid propulsion engines. This study describes the design factors for the development of thrust measurement system (TMS) as well as manufacturing practice of TMS hardware. We investigate characteristics of the TMS and its performance through hot-firing test of small liquid engine in a vacuum test cell which is capable of simulating 100,000 ft of altitude or higher. For performance test of TMS, we measure thrusts by changing propellant injection pressure at steady state firing mode as well as at pulse firing mode. Measured eigen frequency of the TMS is 67 Hz. Linearity test of the TMS shows good performance with less than 0.5% of linearity error.

• Korean Chemical Engineering Research
• /
• v.58 no.1
• /
• pp.1-20
• /
• 2020

Development of efficient methods for clean energy production became a critical issue to improve the quality of human lives. Solar cells is considered as one of the alternative solutions to resolve the issue. Although Si-based solar cells are only popularly utilized for practical applications, high manufacturing cost is considered as a serious drawback for further versatile applications. Thus, different types of are being investigated aiming to replace the Si-based solar cells. Recently, perovskite solar cells (PSC) are considered as a potential replacement for Si-based solar cells due to their low production cost, high power conversion efficiency, light weight and possibility of flexible device fabrication. Thus, we have reviewed the challenges of PSC faced with practical application, particularly on stability.

• Current Photovoltaic Research
• /
• v.2 no.3
• /
• pp.115-119
• /
• 2014

$Cu(In,Ga)Se_2$ (CIGS) thin films have been used as a light absorbing layer in high-efficiency solar cells. In order to improve the quality of the CIGS thin film, often selenization step is applied. Especially when the thin film was formed by non-vacuum powder process, selenization can help to induce grain growth of powder and densification of the thin film. However, selenization is not trivial. It requires either the use of toxic gas, $H_2Se$, or expensive equipment which raises the overall manufacturing cost. Herein, we would like to deliver a new, simple method for selenization. In this method, instead of using a costly two-zone furnace, use of a regular tube furnace is required and selenium is supplied by a mixture of selenium and ceramic powder such as alumina. By adjusting the ratio of selenium vs. alumina powder, selenium vaporization can be carefully controlled. Under the optimized condition, steady supply of selenium vapor was possible which was evidently shown by large grain growth of CIGS within a thin powder layer.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.1
• /
• pp.1-9
• /
• 1998

This study was designed to determine the most suitable manufacturing conditions of stewed pumpkin juice(SPJ) in terms of nutrition and taste. Well ripened pumpkin was heated for 3, 4, 5, 6 and 7 hours in a pressure cooker and then extracted and packed in retort pouches. These were kept at 4$^{\circ}C$ and 28$^{\circ}C$ for 30 days, respectively and changes of the physicochemical components of SPJ were investigated. The free amino acid compositions of pumpkin and SPJ occupied asparagine, aspartic acid, glutamine, arginine and serine in increasing order of abundance. Except SPJ heated for 3 hours, SPJ stored at 28$^{\circ}C$ had the most abundant free amino acids, followed by SPJ stored at 4$^{\circ}C$, and SPJ not stored. The fatty acid composition of pumpkin occupied behenic acid, erucic acid, palmitic acid, linoleic acid, heneicosanoic aicd, in order of abundance. When SPJ was heated over 3 hours, palmitic acid and linolenic acid decreased greatly. SPJ stored at 4$^{\circ}C$ and 28$^{\circ}C$ increased contents of saturated fatty acids such as behenic acid, palmitic acid than SPJ not stored. As SPJ was heated for a long time, carotenoid was mostly destroyed and the Hunter "L", "a" and "b" values of SPJ decreased. Among the mineral constituents of SPJ, Na and Ca were dominantly occupied. It was found that the range of the total visible cell count was 3~4CFU/ml from the SPJ which was heated for 3 hours and it increased by 1$\times$109CFU/ml when the SPJ was stored at 28$^{\circ}C$. It seems that the contamination by microorganism have occurred at packing process. In sensory evaluation, the SPJ which was heated for 5 hours had the highest scores in overall preference, sweet smell and sweetness.ce, sweet smell and sweetness.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.3
• /
• pp.41-46
• /
• 2013

Efficient and inexpensive solar cells are necessary for photo-voltaic to be widely adopted for mainstream electricity generation. For this to occur, the recombination losses of charge carriers (i.e. electrons or holes) must be minimized using a surface passivation technique suitable for manufacturing. Recently it has been shown that aluminum oxide thin films are negatively charged dielectrics that provide excellent surface passivation of silicon solar cells to attract positive-charged holes. Especially aluminum oxide thin film is a quite suitable passivation on the rear side of p-type silicon solar cells. This paper, it demonstrate the interfacial microstructure and electrical properties of mono-crystalline silicon surface passivated by $Al_2O_3$ films during firing process as applied for screen-printed solar cells. The first task is a comparison of the interfacial microstructure and chemical bonds of PECVD $Al_2O_3$ and of PEALD $Al_2O_3$ films for the surface passivation of silicon. The second is to study electrical properties of double-stacked layers of PEALD $Al_2O_3$/PECVD SiN films after firing process in the temperature range of $650{\sim}950^{\circ}C$.

• Ceramist
• /
• v.23 no.2
• /
• pp.200-210
• /
• 2020

Supported catalysts are at the heart of manufacturing essential chemical, agricultural and pharmaceutical products. While the longevity of such systems is critically hinged on the durability of metal nanoparticles, the conventional deposition/dispersion techniques are difficult to enhance the stability of the metal nanoparticles due to the lack of control over the interaction between metal-support. Regarding this matter, ex-solution has begun to be recognized as one of the most promising methodologies to develop thermally and chemically robust nanoparticles. By dissolving desired catalysts as a cation form into a parent oxide, fine and uniformly distributed metal nano-catalysts can be subsequently grown in situ under reductive heat treatment, which is referred to ex-solution. Over the several years, ex-solved analog has resulted in tremendous progress in the chemical-electrochemical applications due to the exceptional robustness coupled with ease synthesis. Herein, we describe the ex-solution process in detail which therein introducing the unique characteristics of ex-solved particles that distinguish them from conventionally dispersed nanoparticles. We then go through the history of science regarding the ex-solution phenomena and summarize several major research achievements which embrace the ex-solved nanoparticles to markedly promote the catalytic performances. In conclusion, we address the remaining challenges and the future perspectives of this rapidly growing field.

• Current Photovoltaic Research
• /
• v.3 no.4
• /
• pp.121-125
• /
• 2015

BIPV system is one of the best ways to harness PV module. The BIPV system not only produces electricity, but also acts as a building envelope. Thus, it has the strong point of increasing the economical efficiency by applying the PV modules to the buildings. Bifacial solar cells can convert solar energy to electrical energy from both sides of the module. In addition, it is designed as 3 busbar layout which is the same with ordinary mono-facial soalr cells. Therefore, many of the module manufacturers can easily produce the bifacial solar cells without changing their manufacturing equipment. Moreover, bifacial BIPV system has much potential in building application by utilizing glass to glass structure. However, the performance of bifacial solar cells depends on a variety of factors, ranging from the back surface to surrounding conditions. Therefore, in order to apply bifacial solar cells to buildings, an analysis of bifacial PV module performance should be carried out that includes a consideration of various design elements, and reflects a wide range of installation conditions. As a result it found that the white insulation reflector type can improve the performance of the bifacial BIPV system by 16%, compared to the black insulation reflector type. The performance of the bifacial BIPV was also shown to be influenced by inclination angle, due to changes in both the amount of radiation captured on the front face and the radiation transmitted to the rear face through the transparent space. In this study is limited design condition and installation condition. Accordingly follow-up researches in this part need to be conducted.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.7
• /
• pp.600-605
• /
• 2007

Process variables for manufacturing the $CuInSe_2$ thin film were established in order to clarify optimum conditions for growth of the thin film depending upon process conditions (substrate temperature, sputtering pressure, DC/RF Power), and then by changing a number of vapor deposition conditions and Annealing conditions variously, structural and electrical characteristics were measured. Thereby, optimum process variables were derived. For the manufacture of the $CuInSe_2$, Cu, In and Se were vapor-deposited in the named order. Among them, Cu and In were vapor-deposited by using the sputtering method in consideration of their adhesive force to the substrate, and the DC/RF power was controlled so that the composition of Cu and In might be 1 : 1, while the surface temperature having an effect on the quality of the thin film was changed from $100^{\circ}C\;to\;300^{\circ}C$ at intervals of $50^{\circ}C$. The diffract fringe of X-ray, which depended upon the substrate temperature and the Annealing temperature of the manufactured $CuInSe_2$ thin film, was investigated. scanning electron microgaphs of represents a case that a sample manufactured at the substrate temperature of $100^{\circ}C$ was thermally treated at $200{\times}350^{\circ}C$. As a result, at $500^{\circ}C$ of the Annealing temperature, their chemical composition was measured in the proportion of 1 : 1 : 2. It could be known that under this condition, the most excellent thin film was formed, compared with the other conditions.

• Food Science of Animal Resources
• /
• v.33 no.1
• /
• pp.75-82
• /
• 2013

This study aimed to isolate lactic acid bacteria (LAB) from Kimchi and to identify suitable probiotic strain for application in fermented dairy product as a commercial starter culture. A total of 106 (LAB) strains were isolated from Kimchi collected from different regions in Korea and their phenotypic characteristics were assayed. Four isolates from MRS agar plates were selected and designated as DKL109, DKL119, DKL121 and DKL128. They were identified first by API 50 CHL kit and then 16S rRNA gene sequencing. DKL121 and DKL128 were identified as Lactobacillus paracasei and Lactobacillus casei, respectively. Other two isolates (DKL109 and DKL119) were identified as Lactobacillus plantarum. To estimate their applicability in dairy products, the characteristics including acid and bile tolerance, cold shock induced cryotolerance and enzymatic activities were determined. There was wide variation in ability of strains to acid tolerance, but no significant differences in bile tolerance, cold shock induced cryotolerance within selected strains. DKL119 and DKL121 showed the highest resistance to acid and bile and the highest ${\beta}$-galactosidase activity, respectively. When these two strains were used for yogurt preparation as a single starter culture, their viable cell counts reached to $1.0{\times}10^9CFU/mL$. Lactobacillus plantarum DKL119 showed faster acid development than commercial starter culture. Also storage trials at $10^{\circ}C$ showed that the viability of these strains was retained over 15 d. With these results, it was indicated that probiotics isolated from Kimchi can be used in yogurt manufacturing as a starter culture.