• Korean Journal of Medicinal Crop Science
• /
• v.13 no.5
• /
• pp.276-283
• /
• 2005

Ascorbic acid is a great antioxidant and helps protect the body against pollutants. GDP-mannose pyrophosphorylase (GMPase) is a key enzyme in manufacturing GDP-mannose, a glycosyl donor for ascorbate and cell wall biosynthesis as well as for protein glycosylation. In this study, we described molecular cloning of a full-length cDNA from Potato (Solanum tuberosum L. cv. Jasim), using tuber. The cDNA isolated encoded a GDP-mannose pyrophosphrylase. The nucleotide sequence of pGMPC showed about 95%, 89% and 80% homology with S. tuberosum (AF022716), N. tabacum (AB066279) and A. thaliana (AF076484) cDNAs clone known as GMPase, respectively. We detected the expression of GMPase using RT-PCR. The highest expression of GMPase was found in stems, and the largest amount of ascorbic acid was also presented in stems. In contrast, the leaf showed minimal level of GMPase transcript and ascorbic acid content. We propose that GMPase expression patterns were similar to the changes of ascorbic acid content in the leaves treated with diverse stresses.

• Applied Biological Chemistry
• /
• v.50 no.3
• /
• pp.217-223
• /
• 2007

Cosmetic products including toner and essence were manufactured to evaluate the effect of green tea polyphenols. In addition, irradiation was applied to remove an undesirable color of green tea polyphenol(GTP), which may cause a problem in marketing. The growth inhibition rates of GTP, PT, and PE on all cell lines were shown to be over 80% at 500 ppm concentration. Especially the growth inhibition rates of GTP, PT, and PE on human melanoma(G361) cells were shown to be over 80% at only 100 ppm concentration. Results indicate that the addition of irradiated green tea polyphenol may be effective in the manufacturing of functional cosmetics including toner and essence with various anti-cancer activities.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.2
• /
• pp.122-132
• /
• 2013

In this research the development of unstructured grid discretization solution techniques is presented. The purpose is to describe such a conservative discretization scheme applied for experimental validation work. The objective of this paper is to better establish the effects of mesh generation techniques on velocity fields and particle deposition patterns to determine the optimal aerodynamic characteristics. In order to achieve the objective, the mesh surface discretization approaches used the VLA prototype manufacturing tolerance zone of the outer surface. There were 3 schemes for this discretization study implementation. They are solver validation, grid convergence study and surface tolerance study. A solver validation work was implemented for the simple 2D and 3D model to get the optimum solver for the VLA model. A grid convergence study was also conducted with a different growth factor and cell spacing, the amount of mesh can be controlled. With several amount of mesh we can get the converged amount of mesh compared to experimental data. The density around surface model can be calculated by controlling the number of element in every important and sensitive surface area of the model. The solver validation work result provided the optimum solver to employ in the VLA model analysis calculation. The convergence study approach result indicated that the aerodynamic trend characteristic was captured smooth enough compared with the experimental data. During the surface tolerance scheme, it could catch the aerodynamics data of the experiment data. The discretization studies made the validation work more efficient way to achieve the purpose of this paper.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.174-181
• /
• 2004

Ultra precision positioning mechanism has widely been used on semiconductor manufacturing equipments, optical spectrum analyzer and cell manipulations. Ultra precision positioning mechanism is consisted of several actuators, sensors, guides and control systems. Its efficiency depends on each performance of components. The object of this study is to design, analysis and manufacture all of the inchworm linear motor system, which is one of the equipments embodied in ultra precision positioning mechanism. Inchworm linear motor system is consisted of a controller system and an inchworm linear motor, and its driving form is similar to a motion of spanworm. A design and manufacture of inchworm linear motor, which is consisted of three PZT actuators, a rod, two columns and a guide plate, are performed. Minimizing the von-Mises stress of the hinge using Taguchi method and simulation by FEM software optimizes the structural design in a column of flexure hinge. The designed columns and guide plates are manufactured by a W-EDM and NC-milling. A controller system, which is an apparatus to drive inchworm linear motor, can easily adjust driving conditions by varying resonance frequency and input-output voltage of actuators and amplifiers. The performance of manufactured inchworm linear motor system is verified and valuated. In the future, inchworm linear motor system will be used to make a more precision positioning by reinforcing a sensor and feedback system.

• Industrial Engineering and Management Systems
• /
• v.13 no.1
• /
• pp.52-66
• /
• 2014

Promotion of a closed-loop supply chain requires disassembly systems that recycle end-of-life (EOL) assembled products. To operate the recycling disassembly system, parts selection is environmentally and economically carried out with non-destructive or destructive disassembly, and the recycling rate of the whole EOL product is determined. As the number of disassembled parts increases, the recycling rate basically increases. However, the labor cost also increases and brings lower profit, which is the difference between the recovered material prices and the disassembly costs. On the other hand, since the precedence relationships among disassembly tasks of the product also change with the parts selections, it is also required to optimize allocation of the tasks in designing a disassembly line. In addition, because information is required for such a design, the recycling rate, profit of each part and disassembly task times take precedence among the disassembly tasks. However, it is difficult to obtain that information in advance before collecting the actual EOL product. This study proposes and analyzes an optimal disassembly system design using integer programming with the environmental and economic parts selection (Igarashi et al., 2013), which harmonizes the recycling rate and profit using recyclability evaluation method (REM) developed by Hitachi, Ltd. The first stage involves optimization of environmental and economic parts selection with integer programming with ${\varepsilon}$ constraint, and the second stage involves optimization of the line balancing with integer programming in terms of minimizing the number of stations. The first and second stages are generally and mathematically formulized, and the relationships between them are analyzed in the cases of cell phones, computers and cleaners.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1096_1097
• /
• 2009

Aluminium doped zinc oxide(ZnO:Al) thin film, which is mainly used as a transparent conducting electrode in electronic devices, has many advantages compared with conventional indium tin oxide(ITO). In this paper in order to investigate the possible application of ZnO:Al thin films as a transparent conducting electrode for flexible film-typed dye sensitized solar cell (FT-DSCs), ZnO:Al and ITO thin films were prepared on the polyethylene terephthalate (PET) substrate by r. f. magnetron sputtering method. Specially one-inched FT-DSCs using either a ZnO:Al or ITO electrode were also fabricated separately under the same manufacturing conditions. Some properties of both the FT-DSCs with ZnO:Al and ITO transparent electrodes, such as conversion efficiency, fill factor, and photocurrent were measured and compared with each other. The results showed that by doping the ZnO target with 2 wt% of $Al_2O_3$, the film deposited at discharge power of 200W resulted in the minimum resistivity of $2.2\times10^{-3}\Omega/cm$ and at ransmittance of 91.7%, which are comparable with those of commercially available ITO. Two types of FT-DSCs showed nearly the same tendency of I-V characteristics and the same value of conversion efficiencies. Efficiency of FT-DSCs using ZnO:Al electrode was around 2.6% and that of fabricated FT-DSCs using ITO was 2.5%. This means that ZnO:Al thin film can be used in FT-DSCs as a transparent conducting layer.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1272_1274
• /
• 2009

$MgF_2$ is a current material for the optical applications in the UV and deep UV range. Process variables for manufacturing the $MgF_2$ thin film were established in order to clarify optimum conditions for growth of the thin film depending upon process conditions, and then by changing a number of vapor deposition conditions and substrate temperature, Annealing conditions variously, structural and Optical characteristics were measured. Thereby, optimum process variables were derived. Nevertheless, modern applications still require improvement of the optical and structural quality of the deposited layers. In the present work, the composition and microstructure of $MgF_2$ single layers grown on slide glass substrate by Electro beam Evaporator(KV-660) processes, were analyzed and compared. The surface Substrate temperature having an effect on the quality of the thin film was changed from 200[$^{\circ}C$] to 350[$^{\circ}C$] at intervals of 50[$^{\circ}C$]. and annealing temperature an effect on the thin film was changed from 200[$^{\circ}C$] to 400[$^{\circ}C$] at intervals of 50[$^{\circ}C$]. Physical properties of the thin film were investigated at various fabrication conditions substrate temperature, annealing and temperature, annealing time by XRD, FE-SEM.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.1
• /
• pp.1-5
• /
• 2005

ABSTRACT -Ipriflavone is a synthetic flavonoid derivate that improves osteoblast cell activity inhibiting bone resorption. In order to improve the bioavailability, solid dispersions of ipriflavone with PVP (poly-N-vinylpyrrolidone, MW=40,000 g/mole) were prepared by a spray-drying method. During the manufacturing of solid dispersion, various solvents [ethanol (EtOH), acetonitrile, methylene chloride and cosolvent-EtOH:acetone=1:1] were used to dissolve the ipriflavone and PVP. Scanning electron microscopy (SEM) and differential scanning calorimetry (DSC) were used to evaluate the physicochemical interaction between ipriflavone and PVP. Particle size, crystallinity and the area of the endotherm $({\Delta}H)$ of solid dispersed ipriflavone using the acetonitrile as solvent were much smaller than those of the other preparation types. Bioavailability of ipriflavone in vivo was changed by solvents. When considering the result of in vivo test, solid dispersion of ipriflavone using the acetonitrile as solvent showed the best choice.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.11
• /
• pp.1823-1833
• /
• 2018

Fluorescence in-situ hybridization (FISH) is a common and popular method used to investigate microbial communities in natural and engineered environments. In this study, two specific 16S rRNA-targeted oligonucleotide probes, CLZ and KCLZ, were designed and verified to quantify the genus Clostridium and the species Clostridium kluyveri. The optimal concentration of hybridization buffer solution for both probes was 30% (w/v). The specificity of the designed probes was high due to the use of pellets from pure reference strains. Feasibility was tested using samples of Chinese liquor from the famed Luzhou manufacturing cellar. The effectiveness of detecting target cells appears to vary widely in different environments. In pit mud, the detection effectiveness of the target cell by probes CLZ and KCLZ was 49.11% and 32.14%, respectively. Quantitative analysis by FISH technique of microbes in pit mud and fermented grains showed consistency with the results detected by qPCR and PCR-DGGE techniques, which showed that the probes CLZ and KCLZ were suitable to analyze the biomass of Clostridium spp. and C. kluyveri during liquor fermentation. Therefore, this study provides a method for quantitative analysis of Clostridium spp. and C. kluyveri and monitoring their community dynamics in microecosystems.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.3
• /
• pp.297-307
• /
• 2020

This study investigated the cosmetic effects of enzymatic hydrolytes of an aquatic by-product, fish skin. The skins of olive flounder Paralichthys olivaceus (PO) and Alaska pollock Gadus chalcogrammus (AP) were hydrolyzed using pepsin, Alcalase, and Protemax. Three enzymatic hydrolytes were obtained and the inhibitory effects of these hydrolytes on the aging-related enzymes tyrosinase, elastase, and collagenase were determined. The results indicated that the pepsin hydrolytes of PO and PA had stronger activities than the other hydrolytes. PO and PA also significantly reduced the intracellular reactive oxygen species levels in and improved the viability of H₂O₂-treated Vero cells; decreased nitric oxide production by and increased the cell viability of lipopolysaccharide-treated RAW 264.7 cells; and reduced intracellular reactive oxygen species levels and improved the viability of ultraviolet B irradiated HaCaT cells and human dermal fibroblasts. Furthermore, PO and PA remarkably reduced the intra- and extracellular melanin contents of alpha-melanocyte-stimulating hormone-stimulated B16F10 cells. These results demonstrate that PO and PA have potential for use in the cosmetic industry.