• Proceedings of the KIEE Conference
• /
• 2007.11c
• /
• pp.146-148
• /
• 2007

In this paper, we designed the bay control unit that is based on the microprocessors and integrates with the new technology of electrical, electronic, and mechanical fields. Nowadays the customers have required much more integrates multi protection relay, monitoring, control devices and power management for better and easier maintenance, performance, electrical system analysis and communication according to new trend of switchboard. This bay controller supplies those requirements of customers with easy handling and operation. This bay controller provides a graphic display with rear-lit liquid crystal LCD and push buttons as kinds of HMI. This bay controller provides the parameter setting program, various editors and fault recording and analysis program on Windows/95/98/NT/2000/XP for HMI. In addition, this bay controller can be set manually and this manual setting function helps user to interface easily.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.11a
• /
• pp.371-376
• /
• 2002

자동화된 생산시설에도 불구하고, 아직도 여러 현장에는 사람이 직접 bag, box, carton 등을 들고, 내리고, 옮기는 등의 인력운반 (Manual Materials Handling, MMH) 작업으로 생산활동이 이루어지고 있다. 상자 운반 작업에서 있어서 손잡이는 최대허용무게에 영향을 미친다는 연구 결과들이 많이 나왔지만, 자세에 따른 손잡이 형태의 영향에 관한 연구들은 미흡한 실정이다. 따라서 본 연구에서는 MMH 작업시 흔히 사용되는 3가지 자세(구부린 자세, 팔을 편 자세, 팔을 90$^{\circ}$로 굽혔을 때 자세)에서 손잡이 형태에 따라 tote box를 들 때, 작업자세와 손잡이 형태에 따른 Maximum Voluntary Contraction (이하 MVC)를 측정하고 MVC에 대한 작업자세와 손잡이 형태의 상관관계의 통계적 분석, 주관적 평가방법(Borg법)과 MVC와의 유의성을 검증하였다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.1
• /
• pp.9-13
• /
• 2002

The objective of this study was to analyze and make comparison between the physical responses such as oxygen consumption rate, heart rate, and EMG-measurement for lifting tasks. Lifting activities with three different working frequencies(5, 8, 11 lifts/min) and two different weights(10, 20kg) for a lifting range(from floor to 76cm height) were studied. It was found that theme are positive correlations between the oxygen consumption rate and the EMG-measurements on the region of law back. Even though these physical responses were influenced by work weights and work frequency, it was found that the work frequency plays more important role in making muscle fatigue than the work weight. From these finding it is suggested that the work frequency should be considered as a more influencing factor than the work weight as long as the weight belongs to the permissible range based on the viewpoint of the biomechanical criterion for designing a job of manual materials handling tasks.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.07a
• /
• pp.141-143
• /
• 2013

본 연구에서는 인력물자취급시 역사적 관점에서 생리학적 연구방법, 생체역학적 연구방법, 인체심리학적 연구방법들을 검토하여 보병용 무기체계의 휴대성 및 이동성을 분석하였다. 본 연구에서는 휴대성과 이동성 간의 관계를 도식하였다. 단거리의 짧은 기동거리에서는 생체역학적 기준치를, 1-2시간의 중간인 이동에서는 인체심리학적 기준치를, 4시간 혹은 그 이상의 장거리에서는 생리학적 기준치를 적용하여 각각의 가이드라인들을 상호 절충하는 것이 필요한 것으로 판단된다. 본 연구에서는 보병의 물자취급시 4가지 연구방법을 제안하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.07a
• /
• pp.149-151
• /
• 2013

본 연구의 목적은 휴대용 보병무기체계의 배낭 설계를 위하여 인체공학적인 물자취급 중량을 검토하는데 있다. 제품설계시 인체공학적 설계 가이드라인과 운용현황을 조사분석하여 효율적인 운용성능을 위한 기초자료를 제공하고자 한다. 기존의 설계 가이드라인을 분석한 결과, 병사의 인체사이즈 측면에서는 5%tile의 경우 -091kg으로 여유중량이 부족하지만, 95%tile에서는 34.17kg까지 여유중량이 발생하는 것으로 판단된다. 이러한 연구결과는 물자취급시 편하고, 효율적인 운용성능을 창출하기 위해서 휴대중량과 이동거리에 따라 여유중량을 관리해야 할 것으로 판단된다.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.11a
• /
• pp.425-432
• /
• 2007

In the policy management of the safety&health, the environment and the quality, the documentation of the management system is required in every international regulatory guides. In case of 3 level classification of the system documents, it generally will be identified such name as the manual, the procedure and the job instruction. Each document has the unique role and usage though, the job instructions, especially, would be developed to support the practical job worker. So, the job instructions should be reflect the latest know-how of the job-handling methods. And that, it should be used at any times by the practical job worker. This study is planned to survey the actual usage status of the job instructions of the domestic enterprises, and tried to suggest the effective way of maintaining the documents.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.435-444
• /
• 2010

To identify and evaluate the risk factors in WMSD work, a number of ergonomic workload evaluation methods have been developed. In the legal examination of WMSD risk factors, simple observational workload evaluation methods are widely used instead of using costly measurement equipments such as EMG and motion analyzer. The simple workload evaluation methods can be categorized into three groups; risk factor checklist methods, posture observation methods, and manual material handling task evaluation methods. In terms of the categories, this survey summarized several representative workload evaluation methods and compared them each other. Then some industrial application cases referring each the workload evaluation methods were surveyed. Due to the characteristics of each method, the selection and application procedure of workload evaluation method should be appropriate for the corresponding work. Therefore, some guidelines for the selection and application procedure of workload evaluation method were suggested.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.393-404
• /
• 2010

The purpose of this study is to identify the trends and features of existing articles on work-related musculoskeletal disorders (WMSD), and to suggest the direction for future work. Articles on WMSD were reviewed and analyzed by research objects and characteristics. This paper describes a number of issues related to strategies and practices which were done in order to prevent work-related musculoskeletal disorders; 1) trends and characteristics of work-related musculoskeletal disorders, 2) legal enforcement related to systems preventing WMSD, 3) workplace assessment methods and guidelines for manual material handling, 4) ergonomic intervention, ergonomics program and its effectiveness. A list of recommendations presented in this study can be used to provide a baseline for the prevention of work-related musculoskeletal disorders.

• Journal of the Korea Furniture Society
• /
• v.19 no.5
• /
• pp.403-410
• /
• 2008

This study is a background for developed woodworking educational program. To achieve the propose of this research, related to handwork to figure out the concept, changes and characteristics of handwork and the products of handwork. The areas of woodworking needs basic hand function of gripping and hooking, strong hands and stability of hand operation. Activities of this area can enhance the ability of controlling the strength of hand and the stability of hand operation. The use of both hands in woodworking promotes the coordination of both hands and handling ability. In the woodworking, diverse functions of hands are used with various tools. Each hand may be move differently, and the hand operation is elaborated. These features of woodworking help growing coordinations and hand function, and developing brain and creativeness.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.9 no.2
• /
• pp.67-72
• /
• 1989

In nuclear power plants, nondestructive examinations(NDE) plays an important role in ensuring the integrity and reliability operation. As the number of plants and operational time increased, manual handling of voluminous data associated with PSI/ISI(preservice/inservice inspection) could result in many errors or mistakes in writing the examination plan or other reports. Several new approaches to process the data have been attempted and DBMS(Data Base Management System) has been well known concept with a faster and more accurate data processing. This paper proposes an application program, called NDTSYS designed with DBMS in micro computer. The program could be used for a tool to add new records to a data base, change existing records, delete records and request reports with the data base. It would be helpful to the user who manage the PSI/ISI data with minimal time and effort.