• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.473-478
• /
• 2008

In this experimental, selective catalytic reduction (SCR) of NO with NH3 over manganese sulfates and manganese sulfates was investigated with catalytic activity, kinetics, temperature programmed reduction (TPR) and TGA. Manganese oxides showed high catalytic activity for SCR at temperature below $200^{\circ}C$. In case of manganese sulfates, the temperature at which SCR of nitric oxide appears shifted to high temperature with sulfation degree, and the maximum catalytic efficiency decreased. The temperature of the onset of reduction for manganese oxides and manganese sulfates is about $160^{\circ}C$ and over $280^{\circ}C$, respectively. We suggest that the onset of reduction in TPR correlates with the onset of SCR activity. Because the pre-exponential factor of manganese sulfates is lower as 1/1000 times than that of other catalysts, catalytic activity of manganese sulfates for NO showed low. The reduction temperature of natural manganese ore which consists of various metal oxides showed lower than that of pure manganese oxides.

• Journal of the Korean Chemical Society
• /
• v.29 no.4
• /
• pp.390-396
• /
• 1985

The manganese was extracted from ferromanganese slag with 6N ammonium sulfate and purified with ammonium sulfide. The current efficiencies were substantially increased when small amounts of selenious acid is used as an additive. Stainless steel was used as cathodic electrode and lead (+1% Ag) as anodic electrode. The effects of several variables were investigated, and the optimum conditions were found to be; 40g/l Mn in electrolyte at pH 7.0 with 1$20g/l (NH_4)_2SO_4$, Cathode current density 60mA/cm$^2$, Current efficiency 90% and up at the temperature about $25^{\circ}C.$ The metal produced has been consistantly of high quality.

• Journal of Food Hygiene and Safety
• /
• v.9 no.4
• /
• pp.229-235
• /
• 1994

It is very important to investigate the sanitary chemical conditions of farmwaters used for cattle breeding in the dairy farms. For this purpose we examined pH, KMnO4 consumption, total hardness, chloride, sulfate, NH3-N, NO3-N, fluoride, lead, iron, manganese, cadmium, copper, zinc and chrome in the farmwaters sampled 2 times(spring and summer)in Choongcheongnam and Kangwon Province. The pH of farmwaters in Choongcheongnam and Kangwon Province was 6.49$\pm$0.09, 6.70$\pm$0.06, total hardness 90.21$\pm$7.07, 64.53$\pm$6.38 mg/ι, consumption of KMnO4 4.13$\pm$0.62, 4.34$\pm$0.26mg/ι, NO3-N 6.51$\pm$0.55, 3.61$\pm$0.58 mg/ι, chloride ion 20.51$\pm$1.99, 5.41$\pm$1.36 mg/ι and sulfate ion 6.61$\pm$1.02, 7.28$\pm$1.30 mg/ι, respectively. But NH3-N was scarcely detected. Fluoride, iron, lead, cadmium, zinc, manganese and chrome were not detected from the tested farmwaters. There was high significance between each other in total hardness, NO3-N, chloride ion and sulfate ion. There was regional and seasonal significance in only NO3-N but only regional significance in total hardness and chloride ion.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.245-250
• /
• 2016

Manganese dioxide is the material which has a good characteristic property for a secondary cell. We have surveyed on rechargeable battery of zink-manganese dioxide using aqueous solution and we also surveyed on redox reversibility of zink-manganese dioxide for checking up possibility for a secondary cell. We have found out to be active for charging and discharging of those.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.2
• /
• pp.211-217
• /
• 2013

Corynebacterium glutamicum is one of the well-studied industrial strain that is used for the production of nucleotides and amino acids. Recently, it has also been studied as a possible producer of organic acids such as succinic acid, based on its ability to produce organic acids under an oxygen deprivation condition. In this study, we conducted the optimization of medium components for improved succinate production from C. glutamicum under an oxygen deprivation condition by Plackett-Burman design and applied a response surface methodology. A Plackett-Burman design for ten factors such as glucose, ammonium sulfate, magnesium sulfate, potassium phosphate ($K_2HPO_4$ and $KH_2PO_4$), iron sulfate, manganese sulfate, biotin, thiamine, and sodium bicarbonate was applied to evaluate the effects on succinate production. Glucose, ammonium sulfate, magnesium sulfate, and dipotassium phosphate were found to have significant influence on succinate production, and the optimal concentrations of these four factors were sequentially investigated by the response surface methodology using a Box-Behnken design. The optimal medium components obtained for achieving maximum concentration of succinic acid were as follows: glucose 10 g/l, magnesium sulfate 0.5 g/l, dipotassium phosphate ($K_2HPO_4$) 0.75 g/l, potassium dihydrogen phosphate ($KH_2PO_4$) 0.5 g/l, iron sulfate 6 mg/l, manganese sulfate 4.2 mg/l, biotin 0.2 mg/l, thiamine 0.2 mg/l, and sodium bicarbonate 100 mM. The parameters that differed from a normal BT medium were glucose changed from 40 g/l to 10 g/l, dipotassium phosphate ($K_2HPO_4$) 0.5 g/l changed to 0.75 g/l, and ammonium sulfate ($(NH_4)_2SO_4$) 7 g/l changed to 0 g/l. Under these conditions, the final succinic acid concentration was 16.3 mM, which is about 1.46 fold higher than the original medium (11.1 mM) at 24 h. This work showed the improvement of succinate production by a simple change of media components deduced from sequential optimization.

• Textile Coloration and Finishing
• /
• v.35 no.1
• /
• pp.1-7
• /
• 2023

In this study, the influence of pre-treatment(bleaching, mercerization by liquid ammonia and caustic soda) on cotton fabrics were investigated on dyeing Rubia cordifolia extracts. Aluminium Sulfate, Iron(Ⅱ) Sulfate Heptahydrate, Copper(Ⅱ) Sulfate Pentahydrate, Tin(Ⅱ) Sulfate, Manganese(Ⅱ) Chloride Tetrahydrate were used as mordanting agents. K/S value and washing fastnesses of the dyed cotton fabrics pretreated under different conditions were investigated. The K/S values were increased in the order of bleaching, liquid ammonia and mercerization pre-treatment. It was found that the pre-treatment conditions did not significantly affect the color change. The colorfastness to washing of most of all dyed fabrics were over grade 4 regardless of pre-treatment condition.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.29.1-29.1
• /
• 2011

The selective catalytic reduction (SCR) of $MnO_x$ with $NH_3$ is an effective method for the removal of $MnO_x$ from stationary system. The typical catalyst for this method is $V_2O_5-WO_3(MoO_3)/TiO_2$, caused by the high activity and stability. However, This catalyst is active within $300{\sim}400^{\circ}C$ and occurs the pore plugging from the deposition of ammonium sulfate salts on the catalysts surface. It needs to locate the SCR unit after the desulfurizer and electrostatic precipitator without reheating of the flue gas as well as deposition of dust on the catalyst. The manganese oxides supported on titania catalysts have attracted interest because of its high SCR activity at low temperature. The catalytic activity of $MnO_x/TiO_2$ SCR catalyst with different manganese precursors have investigated for low-temperature SCR in terms of structural, morphological, and physico-chemical analyses. The $MnO_x/TiO_2$ were prepared from three different precursors such as manganese nitrate, manganese acetate (II), and manganese acetate (III) by the sol-gel method and then it calcinated at $500^{\circ}C$ for 2 hr. The structural analysis was carried out to identify the phase transition and the change intensity of catalytic activity by various manganese precursors was analyzed by FT-IR and Raman spectroscopy. These different precursors also led to various surface Mn concentrations indicated by SEM. The Mn acetate (III) tends to be more suppressive the crystalline phase (rutile), and it has not only smaller particle size, but also better distributed than the others. It was confirmed that the catalytic activity of MA (III)-$MnO_x/TiO_2$ was the highest among them.

• Food Engineering Progress
• /
• v.14 no.1
• /
• pp.65-74
• /
• 2010

Culture conditions of L. plantarum TJ-LP-002, the garlic resistant strain isolated from pakimchi (green onion kimchi), were investigated for the use of feed additives. Acetic acid, citric acid, lactic acid, and tartaric acid were detected in the culture supernatant, and especially the concentrations of lactic acid and acetic acid significantly increased during cultivation. The antimicrobial activity of L. plantarum TJ-LP-002 was not affected by proteases, calatase or cellulase, which showed that the antimicrobial activity might be due to the production of acids rather than proteinaceous antimicrobial substances. L. plantarum TJ-LP-002 was resistant to neomycin sulfate, spectinomycin dihydrochloride, and lincomycin hydrochloride, sensitive to streptomycin sulfate, and intermediate resistant to ampicillin trihydrate, chloramphenicol, erythromycin, tetracycline hydrochloride, and kanamycin sulfate. The optimum initial pH of medium, fermentation temperature and time for the cell growth and antibacterial activity were pH 7.0, 30${^{\circ}C}$ and 24hr, respectively. The optimal composition of culture medium for the cell growth and antimicrobial activity was 3%(w/v) glucose as a carbon source, 3%(w/v) yeast extract as a nitrogen source, and manganese sulfate and ammonium citrate as inorganic salts. The combinatorial supplementation of these inorganic salts, rather than sole addition as an inorganic salt, resulted in better antibacterial activity.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.483-486
• /
• 2021

Catalytic ozonation of methyl ethyl ketone (MEK) has been examined over mesoporous MnO_x/Al₂O₃ (MA) catalysts developed by a solvent deficient method using two different manganese precursors including manganese chloride (C) and manganese sulfate (S) at room temperature. The maximum catalytic activities of MA with C (MEK removal efficiency and ozone decomposition of 98.4 and 93.7%, respectively) were higher than those of MA with S (MEK removal efficiency and ozone decomposition of 96 and 68%, respectively). Also the catalytic stability of MA with C was much higher than that of MA with S. The physico-chemical properties of catalysts are well correlated with the activity results, which confirmed that fine dispersion of MnO_x species with high ratios of Mn³⁺/Mn⁴⁺ and more acid sites are attributed to the higher catalyst stability for the MA-C catalyst.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.2
• /
• pp.151-157
• /
• 2005

A one-dimensional numerical model was developed to simulate vertical profiles of electron acceptors and their reduced species in benthic sediments. The model accounted for microbial degradation of organic matter and subsequent chemical reactions of interest using stoichiometric relationships. Depending on the dominant electron acceptors utilized by microorganisms, the benthic sediments were assumed to be vertically subdivided into six zones: (1) aerobic respiration, (2) denitrification, (3) manganese reduction, (4) iron reduction, (5) sulfate reduction, and (6) methanogenesis. The utilizations of electron acceptors in the biologically mediated oxidation of organic matter were represented by Monod-type expression. The mass balance equations formulated for the reactive transport of organic matter, electron acceptors, and their corresponding reduced species in the sediments were solved utilizing an iterative multistep numerical method. The ability of model to simulate a freshwater sediments system was tested by comparing simulation results against published data obtained from lake sediments. The simulation results reasonably agreed with field measurements for most species, except for ammonia. This result showed that the C/N ratio (106/16) in the sediments is lower than what the Redfield formula prescribes. Since accurate estimates of vertical profiles of electron acceptors and their reduced species are important to determine the mobility and bioavailability of trace metals in the sediments, the model has potential application to assess the stability of selected trace metals in the sediments.