• 한국세라믹학회지
• /
• 제29권7호
• /
• pp.539-543
• /
• 1992

The continuous growth method was developed for Mn-Zn Ferrite single crystals. It is a new process that the polycrystalline MnχZn1-χFe2O4 raw materials are supplied continuously from the powder feeding system to the crucible heated by R.F. induction and melted in the crucible, and after the single crystals seed is attached to crucible's hole, the crystals are pulled downward with rotation. Growing the crystals by using the growth method different from the conventional Bridgman or Floating Zone method, we defined the factors having effect on the crystal growing through the pre-experiments. They are temperature distribution in the crucible, melt velocity according to its height, wettability between the crucible's bottom and melt. Therefore, Mn-Zn Ferrite single crystals were to be grown by attaining the appropriate melt height in the crucible, powder feeding rate, temperature gradient between the crucible and interface, crystal growing speed, and this method was confirmed to have possibility for single crystal growing.

• 한국토양환경학회지
• /
• 제1권2호
• /
• pp.51-60
• /
• 1996

본 연구에서는 산업폐기물로 버려지는 hematite와 ferrite를 이용하여 Mn-EDTA와 불소의 제거에 대한 실험을 행하였다. 제거율을 비교, 평가하기 위하여 무기오염물에 대하여 우수한 흡착능을 가지는 것으로 알려진 Na-bentonite를 실험에 포함하였다. Batch형태의 실험 결과, 망간에 대하여 여러 초기농도에서 ferrite-A는 48∼65 %, ferrite-B는 46∼57 %, hematite 의 경우 17∼26%o의 제거율을 갖는 것으로 나타났으며, Na-bentonite의 경우, 10∼23%의 제거율을 나타냈다. 불소의 경우에는 hematite가 53∼63%의 제거율을, ferrite-A가 54∼63%, ferrite-B는 20∼38%를 보였다. 연구 결과 Hematite와 Ferrite가 가지고 있는 특히 complex ion을 형성하는 무기 오염 물질 제거능이 Na-bentonite 보다 우수한 것으로 나타났다. 결론적으로 이러한 산화 광물과 Na-Bentonite 의 혼합을 통하여 차수재로서의 Na-bentonite의 역할을 증진시킬 수 있을 것이다.

• 자원리싸이클링
• /
• 제11권1호
• /
• pp.3-8
• /
• 2002

고탄소페로망간을 중저탄소페로망간으로 제조하는 AOD공정에서 발생되는 분진은 약 90%가 $Mn_3$$O_4$이므로, 이를 이용하여 soft ferrite의 원료인 고순도 $Mn_3$$O_4$분말을 제조하기 위해서는 침출한 액의 Mn을 더욱 정제하여야 한다. 분진을 활성탄으로 배소하여 MnO로 환원시키고, 상온의 4N 염산수용액에 180g/L의 환원된 분진을 첨가하면 용액의 pH가 5이상이 되고 Fe와 Si가 침전으로 제거된 약 10%의 망간침출액이 얻어진다. Mn의 농도가 약 15000 ppm이 되도록 희석한 $70^{\circ}C$의 침출액에 F의 농도가 3000ppm이 되도록 $NH_4$F를 첨가하면 Ca가 침전하여 약14 ppm이하로 제거된다. Ca를 침전시킨 상징액에(NH$ 1.5M_4$)$_2$$CO_3$수용액을 2L/min으로 Mn의 당량만큼 첨가하면 미립의 고순도 $MnCO_3$가 침전한다. 침전을 여과하고 건조한 후에 $1000^{\circ}C$에서 2 시간 소성하면 median size가 $8.2mu$m인$ Mn_3$O$_4$를 얻을 수 있다. 제조된 산물은 99%이상의 순도로 soft ferrite용 Mn$O_3$$_4$분말의 규격을 만족한다.

• Journal of Magnetics
• /
• 제18권1호
• /
• pp.21-25
• /
• 2013

Nickel substituted manganese ferrites, $Mn_{1-x}Ni_xFe_2O_4$ ($0.0{\leq}x{\leq}0.6$), were fabricated by sol-gel method. The effects of sintering and substitution on their crystallographic and magnetic properties were studied. X-ray diffractometry of $Mn_{0.6}Ni_{0.4}Fe_2O_4$ ferrite sintered above 523 K indicated a spinel structure; particles increased in size with hotter sintering. The M$\ddot{o}$ssbauer spectrum of this ferrite sintered at 523 K could be fitted as a single quadrupole doublet, indicative of a superparamagnetic phase. Sintering at 573 K led to spectrum fitted as the superposition of two Zeeman sextets and a single quadrupole doublet, indicating both ferrimagnetic and paramagnetic phase. Sintering at 673 K and at 773 K led to spectra fitted as two Zeeman sextets due to a ferrimagnetic phase. The saturation magnetization and the coercivity of $Mn_{0.6}Ni_{0.4}Fe_2O_4$ ferrite sintered at 773 K were 53.05 emu/g and 142.08 Oe. In $Mn_{1-x}Ni_xFe_2O_4$ ($0.0{\leq}x{\leq}0.6$) ferrites, sintering of any composition at 773 K led to a single spinel structure. Increased Ni substitution decreased the ferrites' lattice constants and increased their particle sizes. The M$\ddot{o}$ssbauer spectra could be fitted as the superposition of two Zeeman sextets due to the tetrahedral and the octahedral sites of the $Fe^{3+}$ ions. The variations of saturation magnetization and coercivity with changing Ni content could be explained using the changes of particle size.

• 한국재료학회지
• /
• 제30권1호
• /
• pp.44-49
• /
• 2020

The effect of intercritical annealing temperature on the microstructure and mechanical properties of Fe-9Mn-0.2C-3Al-0.5Si medium manganese steels containing Cu and Ni is investigated in this study. Six kinds of medium manganese steels are fabricated by varying the chemical composition and intercritical annealing temperature. Hardness and tensile tests are performed to examine the correlation of microstructure and mechanical properties for the intercritical annealed medium manganese steels containing Cu and Ni. The microstructures of all the steels are composed mostly of lath ferrite, reverted austenite and cementite, regardless of annealing temperature. The room-temperature tensile test results show that the yield and tensile strengths decrease with increasing intercritical annealing temperature due to higher volume fraction and larger thickness of reverted austenite. On the other hand, total and uniform elongations, and strain hardening exponent increase due to higher dislocation density because transformation-induced plasticity is promoted with increasing annealing temperature by reduction in reverted austenite stability.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.82.2-82.2
• /
• 2008

• Journal of Magnetics
• /
• 제14권2호
• /
• pp.93-96
• /
• 2009

The Mn-substituted M-type Ba-ferrite ($BaFe_{12-x}Mn_xO_{19}$; x = 0, 2, 4, 6) powders were prepared by the HTTD (High Temperature Thermal Decomposition) method. The effect of $Mn^{3+}$ Jahn-Teller ions on the magnetic properties has been studied by x-ray diffraction, vibrating sample magnetometry, and $M{\ddot{o}}ssbauer$ spectroscopy. With increasing Mn substitution, the lattice parameter $a_0$ increases while $c_0$ decreases. The magnetocrystalline anisotropy constants ($K_1$) were determined as 2.9, 2.2, 1.8, and, $1.3{\times}10^6\;erg/cm^3$ for x = 0, 2, 4, and 6, respectively, by the LAS method. We have studied the change of cation distribution by $M{\ddot{o}}ssbauer$ spectroscopy which is closely related to $K_1$.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.245-248
• /
• 2001

Nomura Kohsan Corp. is producing oxides, such as ZnMn$_2$O$_4$, ZnFe$_2$O$_4$, and ZnO, by burning the used dry manganese cells and by sorting out the remnant materials. It is possible to use the recycled materials of the spent dry batteries as the raw materials of deflection yoke cores. Making hish roasting temperature in the recycling system has an effect in reduction of the impurities. As a result, the loss of the cores using the recycled materials is lower. When using the recycled materials, it is required to add Mg (OH)$_2$. ZnO, and Fe$_2$O$_3$in order to rectify the composition of the MnMgZn ferrite for deflection yoke core applications. Furthermore, in order to disappear ZnMn$_2$O$_4$in the formation, it is necessary to control at higher calcining temperatures. The MnMgZn ferrite of using the recycled materials becomes Toss equivalent to the conventional material. TDK Corp. is manufacturing the deflection yoke cores from 1996 using the material recycled from the spent dry batteries.

• 한국세라믹학회지
• /
• 제32권9호
• /
• pp.1033-1039
• /
• 1995

The current experiment has quantitatively investigated the effect of the content of CaO and SiO2 on the microstructure, density, electrical resistivity, power loss and initial permeability of manganese zinc ferrites. The density increased initially with CaO and SiO2 content and the further addition showed an adverse effect. The excess addition of CaO and SiO2 developed a discontinuous grain growth with numerous pores inside grains and lowered the electrical resistivity. The initial permeability decreased with increasing the content of SiO2. The samples with relatively low power loss showed that half of the total loss at 10$0^{\circ}C$, 100 kHz and 2000 Gauss was due to the eddy current loss.

• 한국세라믹학회지
• /
• 제40권1호
• /
• pp.1-4
• /
• 2003

To study the effect of aggregates on the microstructure of sintered bodies, Mn-Zn ferrite powders were prepared by an alcoholic dehydration method. Aggregate powders and reground powders were used as seeds and matrices, respectively. The mixing ratios for the aggregate and reground powders were varied with the sintering temperatures. Green densities were measured with changes in forming pressure and they were related to the microstructures of the sintered bodies. The aggregates proved to be capable of acting as seeds for abnormal grain growth. When the green density difference between the aggregate and the matrix was large, the aggregate could become the seed of abnormal grain growth. As the forming pressure increased, the more aggregates became seeds of abnormal grain growth.