• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.3
• /
• pp.394-410
• /
• 1993

This study was accomplished for appreciation of the mandibular moments according to antero- posterior movement of pivot placed on the lower natural dentition. For this study, 20 subjects(male, $21\sim30$ yrs., average age 24) in the category of normal occlusion were selected, and the intraoral Vitallium clutches were cast and fabricated for each subjects. A 2-dimension PSD(Position Sensitive Detector, Hamamatsu Photonics Co., Japan) was attached to maxillary clutch in a mode of three dimensional control and LED (Light Emit Diode, Hamamatsu Photonics Co., Japan) was set up on mandibular clutch. Both clutches were set into oral cavity of each subjects and adjusted. Then the subjects were allowed to intercuspated with maximal bite force while the pivoting ball in the mid-line moving from anterior toward posterior position. The displacement scales were recorded by CCD camera(Sony, CCD-TR-705) and VCR, The conclusions were as follows : 1. When the subject was allowed to bite the metal pivoting ball in the midline of lower dentition with maximal bite force voluntarily while moving from lower central incisor to canine, 1st premolar, End premolar, 1st molar and 2nd molar. The lever actions on the pivot were revealed in all subjects. The equilibrium of moment were revealed on the pivots of 1st premolar(14 subjects), End premolar(4 subjects), and canine(2 subjects) areas. 2. The changes of loading on the TMJ according to antero-posterior positional changes of metal pivoting ball were able to recognize as follow. Compression on the TMJ was increased when the pivot moves anteriorly from the equilibrium point, and tension on the TMJ was increased when posteriorly. 3. 13 subjects were recognized their habitual chewing sides(Rights, Left8), and 7 subjects were not. During maximal biting, mandible was displaced toward their habitual chewing sides on the metal pivoting ball in the frontal plane. 4. In cephalometric analysis, the average genial angle of 20 subjects was $116.75^{\circ}$ and the average mandibular body length was 79.77mm. The equilibrium points of mandibular moment were positioned more posteriorly in the subjects having larger Genial angle than in the smaller(p<0.05). Relationships among the angle between FH plane and occlusal plane, the angle between occlusal plane and mandibular plane , and mandibular body length were not significant(p>0.05).

• Journal of Technologic Dentistry
• /
• v.34 no.4
• /
• pp.473-482
• /
• 2012

Purpose: The purpose of this study was to investigate the stress distribution of the surrounding tissues according to 3 proximal plate types of the RPI clasp. Methods: The removeable partial denture which mandibular right and left second premolars and mandibular molars were lost was attached to a three dimensional photo elastic epoxy resin model. Then 120N of vertical load was applied. After 3-dimensional photoelastic stress analysis was used to record the isochromatic fringe patterns. Results: Kratochvil type guiding plane exhibited little uniform stress distribution on load center and alveolar ridge, but higher stress concentration on buccal surface of second premolar. Krol type guiding plane exhibited the stress concentration on the front of load center and relatively higher stress concentration on buccal surface of first premolar. However, this type had no effect on canine. Researcher type guiding plane showed the stress concentration on second premolar and molar, but the little stress distribution on first premolar. Conclusion: In all types, excessive stress concentration was appeared and three types were not significant different.

• Restorative Dentistry and Endodontics
• /
• v.49 no.1
• /
• pp.2.1-2.12
• /
• 2024

Objectives: This study aimed to determine the effects of 1-rooted mandibular second molar (MnSM) teeth on root canal anatomy complexities of the mandibular central incisor (MnCI), mandibular lateral incisor (MnLI), mandibular canine (MnCn), mandibular first premolar (MnFP), mandibular second premolar (MnSP), and mandibular first molar (MnFM) teeth. Materials and Methods: Cone-beam computed tomography images of 600 patients with full lower dentition were examined. Individuals with 1-rooted MnSMs were determined, and the complexity of root canal anatomy of other teeth was compared with individuals without 1-rooted MnSMs (Group-1; subjects with at least one 1-rooted MnSM, Group-2; subjects with more than a single root in both MnSMs). A second canal in MnCIs, MnLIs, MnCns, MnFPs, and MnSPs indicated a complicated root canal. The presence of a third root in MnFMs was recorded as complicated. Results: The prevalence of 1-rooted MnSMs was 12.2%, with the C-shaped root type being the most prevalent (9%). There were fewer complicated root canals in MnCIs (p = 0.02), MnLIs (p < 0.001), and MnFPs (p < 0.001) in Group 1. The other teeth showed no difference between the groups (p > 0.05). According to logistic regression analysis, 1-rooted right MnSMs had a negative effect on having complex canal systems of MnLIs and MnFPs. Left MnSMs were explanatory variables on left MnLIs and both MnFPs. Conclusions: In individuals with single-rooted MnSMs, a less complicated root canal system was observed in all teeth except the MnFMs.

• Journal of Technologic Dentistry
• /
• v.42 no.3
• /
• pp.220-227
• /
• 2020

Purpose: This study aims to investigate the cusp variation pattern of the Korean mandibular second premolar and to determine the difference in tooth diameter and surface area using a virtual three-dimensional model. Methods: Dental casts from 69 students were scanned as a virtual dental models with a three-dimensional dental model scanner. Tooth diameter, absolute and relative individual areas, total crown area, the number of lingual cusps and central groove pattern were analyzed using RapidForm 2004. The Mann-Whitney U-test and the Kruskal-Wallis test were performed to verify sexual dimorphism, the difference in tooth diameter and surface according to the cusp variation pattern (α=0.05). Results: There was no significant difference except in buccolingual diameter (p<0.05) and buccolingual diameter at the cervix (p<0.05). The relative surface area of the total clinical crown was 65.76% for the buccal half and 34.24% for the lingual half, with a ratio of 2:1. In the case of the presence of two lingual cusps, the ratio was 21.47% for the mesiolingual half and 14.12% for the distaolingual half, with a ratio of 3:2. The dominant central groove patterns of the second premolar were the H-pattern (42.0%), followed by the Y-pattern (37.7%), then the U-pattern (20.3%). The relative buccal half was largest in the U-pattern central groove and the relative lingual half was largest in the Y-pattern central groove (p<0.05). Conclusion: This study is significant in that it measured quantitative surface areas and the findings could be a meaningful reference to comprehend dental anatomy in Koreans.

• Restorative Dentistry and Endodontics
• /
• v.7 no.1
• /
• pp.41-45
• /
• 1981

A 19-year-old Korean woman presented with left mandibular dental pain and swelling. Periapical radiolucencies were associated with the mandibular left first molar, second molar and the mandibular right second molar. The mandibular right second molar root developed incompletely and has the open apex. Clinical examination revealed worn accessory occlusal cusps of premolars. A diagnosis of dens evaginatus with associated periapical lesion secondary to pulpal necrosis was made. The root canal of the lower right second premolar was sealed with Calcium hydroxide paste for apexification. About two months later Calcium hydroxide paste was removed and the canal was resealed with new Calcium hydroxide paste. After four months the canal was sealed permanently with guttapercha and zinc oxide-eugenol sealer. The root canals of the lower left premolars were irrigated every week with 3.5% NaOCl solution for and half month. And the canals were sealed with gutta-percha and ZOE sealer. Preventive endodontic treatment for the lower right first premolar was undertaken.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.1
• /
• pp.161-173
• /
• 1999

This study was performed to compare the bone mineral densities measured at mandibular premolar area by copper-equivalent image and hydroxyapatite phantom with those measured at radius by dual energy absorptiometry and to evaluate the clinical usefulness of Digital system with slide scanner, copper-equivalent image, and hydroxyapatite phantom. For experiment. intraoral radiograms of 15 normal subjects ranged from 20 years old to 67 old were taken with copper-step wedge at mandibular premolar area and bone mineral densities calculated by conversion equation to bone mineral density of hydroxyapatite were compared with those measured at radius distal 1/3 area by Hologic QDR-1000. Obtained results as follows: 1) The conversion equation was Y=5.97X-0.25 and its determination coefficient was 0.9967. The coefficient of variation in the measurement of copper-equivalent value ranged from 4％ to 8％ and showed high reproducibility. 2) The coefficient of variation in the measurement of bone mineral density by the equation ranged from 7％ to 8％ and showed high reproducibility. 3) The bone mineral densities ranged from 0.35 to 0.79g/cm2 at mandibular premolararea. 4) The correlation coefficient between bone mineral densities at mandibular premolar area and those at radius distal 1/3 area was 0.8965. As summary, digital image analyzing system using copper-equivalent image and hydroxyapatite phantom appeared to be clinically useful to measure the bone mineral density at dental area.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.278-283
• /
• 2017

Purpose: The aim of this study was to evaluate the interdental distances of anterior, premolar, and molar teeth at the cementoenamel junction (CEJ) and 2 mm below the CEJ in healthy natural dentition with cone-beam computerized tomography (cone-beam CT) in order to provide valuable data for ideal implant positioning relative to mesiodistal bone dimensions. Materials and Methods: Two hundred patients who visited Dental Hospital, Wonkwang University, who had natural dentition with healthy interdental papillae, and who underwent cone-beam CT were selected. The cone-beam CT images were converted to digital imaging and communication in medicine (DICOM) files and reconstructed in three-dimensional images. To standardize the cone-beam CT images, head reorientation was performed. All of the measurements were determined on the reconstructed panoramic images by three professionally trained dentists. Results: At the CEJ, the mean maxillary interdental distances were 1.84 mm (anterior teeth), 2.07 mm (premolar), and 2.08 mm (molar), and the mean mandibular interproximal distances were 1.55 mm (anterior teeth), 2.20 mm (premolar), and 2.36 mm (molar). At 2mm below the CEJ, the mean maxillary interdental distances were 2.19 mm (anterior teeth), 2.51 mm (premolar), and 2.60 mm (molar), and the mean mandibular interproximal distances were 1.86 mm (anterior teeth), 2.53 mm (premolar), and 3.01 mm (molar). Conclusion: The interdental distances in the natural dentition were larger at the posterior teeth than at the anterior teeth and also at 2 mm below the CEJ level compared with at the CEJ level. The distances between mandibular incisors were the narrowest and the distances between mandibular molars were the widest in the entire dentition.

• Imaging Science in Dentistry
• /
• v.33 no.3
• /
• pp.131-135
• /
• 2003

Purpose: To determine whether the mandibular radiomorphometric indices in panoramic radiography are correlated with the bone mineral density of Cu-equivalent images in intraoral film. Materials and Methods: The bone mineral density (BMD) of the mandibular premolar area was measured in the Cu-equivalent image of intraoral film. The Panoramic Mandibular Index (PMI) and Mandibular Cortical Width (MCW) were measured in panoramic radiographs of six dry mandibles, and the Pearson correlation between PMI, MCW, and BMD were tested. Results: There were no significant correlations between PMI and BMD (r = 0.280), nor between MCW and BMD (r =0.237). Conclusion: The results show that PMI and MCW were poor diagnostic indicators of mandibular BMD in the six dry mandibles used in this study. The correlationship between the mandibular radiomorphometric indices (PMI and MCW) and mandibular BMD needs to be researched further using large in vivo patient samples.

• Journal of Periodontal and Implant Science
• /
• v.38 no.1
• /
• pp.15-22
• /
• 2008

Purpose: The attachment level is strongly associated with tooth loss and provides useful information on patterns of destruction of the periodontium. The presence of horizontal attachment loss would not be detected in clinical measurement. Therefore, the purpose of the present study was to estimate the patterns of periodontal destruction based on the attachment area and horizontal attachment loss in extracted teeth due to severe periodontitis. Materials and Methods: 307 teeth satisfied the criteria for assessment. An indirect method, based on digital images obtained from a digital camera and an image analysis program, was used to calculate the area of root surface and attachment loss and the extent of horizontal attachment loss. The data were analysed using SPSS. Results: No statistically significant differences among root surfaces were observed in anterior teeth on the loss of attachment area. However, in posterior teeth statistically significant differences in palatal surfaces of maxillary and mandibular premolar and molar surfaces compared with buccal surfaces were observed. Horizontal attachment loss was observed in 21.5% of the teeth examined. Frequency of horizontal attachment loss was highest in the maxillary first premolar (34.8%), followed by the maxillary second premolar (27.3%) and maxillary canine (25%). The mean length of horizontal attachment loss was 1.5mm. Conclusion: More meticulous examination will be needed of the palatal surfaces of maxillary and mandibular premolar and molar teeth. The percentage of teeth with horizontal attachment loss greater than 2.1 mm was 5.2%. Considering the length of curette blades, about 5.2% of teeth were not properly debrided. Therefore, Additional supportive therapy such as local drug delivery has to be considered in treatment of the first maxillary, second premolar and canine due to the high prevalence of horizontal attachment loss.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.21 no.2
• /
• pp.533-539
• /
• 1994

The mandibular buccal frenum is a fold of mucous membrane at the posterior labial vestibule, that attaches the lips and the cheeks to the alveolar mucosa, gingiva, and underlying periosteum. The buccal frenum becomes a problem if its attachment is too close to the marginal gingiva. It may then pull on healthy gingiva, encourge plaque formation and interfere with tooth brushing. Heavy buccal frenum mucogingivally results in insufficient attached gingiva, inadequate vestibular depth and high frenum attachment and also difficulty in eruption of mandibular second premolar. Frenectomy in various forms has been used for many years to remove the influence of the frenum. Unfortunately, the results are not always ideal and there is often postoperative relapse because of muscle pull. In this treatment, frenotomy was used in conjuction with autogenous free gingival graft with the object of removing the influence of the buccal frenum and creating an adequate and stable width of attached gingiva. We observed decrease in muscle pull, adequate width of attached gingiva and increased vestibular depth in addition to progressive eruption of second premolar. Periodic follow-up is needed for evaluation of relapse, grafting gingiva and also space regaining for second premolar.