• 대한간호학회지
• /
• 제27권3호
• /
• pp.563-576
• /
• 1997

This study was carried out to identify basic data for more efficient operation of comprehensive health check-up centers in the national health care system. The researcher reviewed and analyzed the main symptoms of the subjects according to sex, age, occupation and positive rate in the screening tests of a comprehensive health check-up, performed at one comprehensive health check-up center in located in a hospital. The subjects were 512 persons who had a check-up at the comprehensive health check-up, center in K university hospital in Seoul from October 2, 1996 to March 30, 1997. A questionaire developed by the researcher to obtain subject's general characteristics, main symptoms, medical examination, diagnosed disease was used as the tool for the study. The researcher analyzed the data with SPSS PC/sup +/ program. : the distribution of the subject's general characteristics and main symptoms was described with percentages and the difference between main symptoms and screening tests analyzed with X²-test, t-test, ANOVA. The result of this study are as follows : 1. For the distribution of diagnosis in males. liver disease was most frequent and hypertension was second : in females, hypertention and liver disease were not common in that order. 2. The most common complaints were indigestion in the digestive system, sputum in the respiratory system, irregular heart beat in the cardiovascular system, frequent urine in the urinary system vertigo in the hematologic system. 3. The main symptoms according to sex were for females, a statistically siguificant higher rate of complaints in the digestive system, cardiovascular system, urinary system, hematologic system, musculoskeletal, mental & nervous system as compared to males. 4. The main symptoms according to age were that in the the second decade there wara higher rate of complaints in the digestive system, and cardiovascular system than in the older age groups : and in the fifth decade more in the musculoskeletal system. 5. The main symptoms according to occupation were that formers and fishers had a higher rate of complaints in the mental and nervous system as compared to other occupation groups : and office workers, in gynecology. 6. The main symptoms according to diagnosis, were symptoms of the digestive system, frequent in liver disease : symptoms of the cardiovascular system in allergic disease. 7. The screening tests which showed the highest rates were UGI /FGS, PFT : In males a higher rate of abnormality was seen in abdominal ultrasono- graphy and in, females, in mammography. 8. In screening tests according to sex, males showed a higher positive rate for chest X-rays, and LFT, and females, in mammography, pap smear, CBC. 9. In screening tests according to age, higher positive rates of obesity, high blood pressure, chest X-ray, mammography, pap smear, FBS, CBC, urine test were seen in the fifth decade : PFT and abdominal ultrasonography in the third decade. The subjects who wanted comprehensive health check-up were not asymptomatic but had an illness with several symptoms. It is found that the most frequent diagnosed diseases were hypertention and liver disease. So proper observations must be done for them. Comprehensive health check-ups should be changed to a comprehensive examination including treatment beyond examination for those subjects with positive results.

• 현장농수산연구지
• /
• 제14권1호
• /
• pp.23-45
• /
• 2012

본 연구는 고랭지배추의 생산·유통체계에 대한 문제점을 분석하고 개선과제를 제시하는 데에 목적이 있다. 이를위해 고랭지배추를 생산하는 생산자, 산지유통인, 도매시장 종사자, 대형마트 구매담당자에 대한 심층적인 인터뷰를 통해 유용한 정보들을 수집하여 분석하였고 또한 고랭지배추 주산지의 생산과 도매시장의 유통체계 현황에 대한 자료들을 분석하여 고랭지배추의 생산·유통체계에 대한 매우 유용한 시사점을 얻을 수 있었다. 결론적으로 고랭지배추의 생산·유통체계에 대한 현황분석을 통해 개선방안들이 제시되었는 데 첫째는 고랭지배추 비가림재배 방법의 도입을 통해 생산의 안정성을 도모하고, 둘째는 고랭지배추 유통정보에 대한 투명성을 제고시키며, 셋째는 고랭지배추의 주산지로부터 소비자에 이르기까지의 물류체계 개선을 위해 단계적으로 콜드체인시스템을 구축하는 방안을 제시하였다.

• Journal of Biosystems Engineering
• /
• 제19권4호
• /
• pp.343-357
• /
• 1994

Current commercial dairy feed has various problems in low feed productivity, inadequate formulation and higher feeding cost due to excessive capital investment and non-specialized system for the end product. To solve those problems, 6 TMR terminal models were developed in this study. The developed TMR terminal system consists of TMR terminal, TMR main center and combined system linked TMR terminal and TMR main center. 15 TMR main center models were developed to support 10, 20, 30, 40, 50 TMR terminal(30 ton/day basis) by 3 different types, and evaluated for capital investment and operation cost by the analysis of the newly developed computer program. Optimum model size is analyzed and suggested for each model. Followings are summary of this study : 1. The capital investment costs of TMR main centers were 1,600 to 3,800 million won for type 1, 2,200 to 4,500 million won for type 2 and 2,200 to 4,800 million won for type 3. Also model MACE30 or bigger were justified as the economical models. 2. The feed production costs of TMR main center models were 3,166 to 4,824 won/ton for type 1, 3,816 to 6,182 won/ton for type 2 and 3,990 to 6,263 won/ton for type 3. So feed production cost range was 3,166 to 6,263 won/ton. 3. The bigger production capacity, the less TMR main center production cost. The feed production cost of the biggest model MACE50 was 62~65% of smallest model MACE10.

• 항공우주시스템공학회지
• /
• 제13권4호
• /
• pp.50-59
• /
• 2019

플랩제어시스템의 주요 구성품인 주제어밸브의 설계는 실제 제작 경험을 바탕으로 반복-오차 방법에 의존하여 수행하였다. 본 논문에서는 모델 기반의 부품 설계 방법을 제안하였다. 플랩제어시스템은 주제어 밸브, 고장-안전 밸브, 솔레노이드 밸브, LVDT, 구동 모터 등으로 구성된다. 주제어밸브는 주로 스풀과 슬롯으로 구성된다. 주제어밸브의 중요한 설계변수는 슬롯의 폭 (Slot Width), 오버 랩(Overlap) 및 간극(Clearance)이다. AMESim을 활용하여 주 제어 밸브의 유로를 모델링하고 해석하였다. 제안된 설계절차를 적용한 결과 허용된 가공오차 범위 내에서 요구 성능을 충족함을 확인하였다.

• 한국인쇄학회지
• /
• 제12권1호
• /
• pp.99-115
• /
• 1994

This styudy analyzed the main bodies, marginal space, Position of the main bodies of curent textbooks in high schools and "the eriteria of reading system for textbooks" which was sugested the Department of Education and Provided some sugestions for the improvement. The research methods used for the study were both literature review and survey rdsdarch with a questionaire. Inorder to research for the main body of textbook, space of margin, the optimum position fo the main body, sizes of litters, spaces between letters, words, lines length of lines, sizes of main body and margin, and margin, and postitionof main body were checked through a related literature review. For the questionaire experiment, a questionaire based on data drawn from analysis of textbooks, "criteria for reading system of textbook" sugested by the Department of Education, and some suggestions for improvement by the researcher was made and used for the test, targetting 384 body and girl students in high schools.

• International journal of advanced smart convergence
• /
• 제1권2호
• /
• pp.26-29
• /
• 2012

Recently, to efficiently support the real-time requirements of RTLS( Real Time Location System) services, interest in the main memory DBMS is rising. In the main memory DBMS, because all data can be lost when the system failure happens, the recovery method is very important for the stability of the database. Especially, disk I/O in executing the log and the checkpoint becomes the bottleneck of letting down the total system performance. Therefore, it is urgently necessary to research about the recovery method to reduce disk I/O in the main memory DBMS. Therefore, In this paper, we analyzed existing log techniques and check point techniques and existing main memory DBMSs' recovery techniques for recovery techniques research for main memory DBMS.

• 한국생산제조학회지
• /
• 제24권3호
• /
• pp.278-286
• /
• 2015

The effects of the main bearing stiffness combined with vertical non-torque force on the input load and shaft deflection of a gearbox were investigated for the three-point suspension drive train of a wind turbine. A finite element analysis model for the drive train was studied experimentally, and its applicability to the present study was verified. The results show that, as the main bearing stiffness is increased, the input load of the gearbox decreases, whereas the input shaft deflection increases. The stiffness component for the pitch moment has the largest influence on the gearbox input load. Although the gearbox life increases at a higher main bearing stiffness, the economic efficiency and durability of the entire drive train system should also be considered in the selection of the main bearing stiffness.

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.134-140
• /
• 2016

Main Spindle System has effect on performance of machine tools and working quality as well as is required of high reliability. Especially, it takes great importance in producing automobiles which includes a large number of working processes. However, main spindle unit in Machine tools are often cases where damage occurs do not meet the design life due to driving in harsh environments. This is when excessive maintenance and repair of machine tools or for damage stability has resulted in huge economic losses. Therefore, this studying propose a method of accelerated life test for diagnosing and prognosis the state of life assessment main spindle system. Time status monitoring of diagnostic data - through the analysis of the frequency band signals were carried out inside the main spindle bearing condition monitoring and fault diagnosis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.307-309
• /
• 2002

This paper proposes an expert system, which is able to determine the problem-solving strategy for diversity events occurred on the distribution system. The events include events related to the fault, scheduled outage and optimal operating task such as feeder line fault, line scheduled outage, line overload, system load balancing, system loss minimization, main transformer fault, main transformer scheduled outage, main transformer overload, main transformer protection control. The expert system enhances the reliability of software designed by the integrated concept for the diversity events.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2195-2196
• /
• 2006

This study is for implementation of PC based Motor fault diagnosis system. By using harmonics and current signals of the motor, this system diagnoses the motor condition by accumulated harmonic contribution rate. In this proposed system that was composed of 5 parts. A sensor, connection box, evaluation board, device server, and main computer are those. There were two types of sensor, one was harmonic sensor the other was current sensors. The signal was acquired by sensor, and transferred to evaluation board. Second one is connection box. Because the output type of sensor and input type of evaluation board is different, connection box was necessary. Third one was evaluation board. The signal from the sensor was converted to digital signal in evaluation board. And this signal was transferred to device server. Fourth one was device server. Device server transferred the data from evaluation board to main computer. And the last one was other parts controlled by main computer. In main computer, there were communication and diagnosis algorithms. The result was derived by main computer. In the result, there were 12 categories and 5 levels of motor conditions. The proposed system had some advantages comparing with stand alone type commercial motor fault diagnosis system. The first, by using remote access it was easier to get the conditions of motor. The second, there was no need to handle the sensors when users measured the motor signals. By this property, no one was necessary at motor location site. The third, this system was less restricted by times and places than commercial stand alone type diagnosis system. Therefore users can operate this system only using the main computer. Once the sensors are installed at the motor, users doesn't need to move to check up the condition of motors. Moreover, if there is ethernet hub, many motors can be not only diagnosed at once but also decreased its cost.