• 한국환경과학회지
• /
• 제16권2호
• /
• pp.203-210
• /
• 2007

The delivery load data obtained from Nakdong river basin are used for developing the model estimating the daily delivery load on the main side streams of Nakdong River. The developed model assesses the daily contamination loads of the main thirteen side streams that contribute to the main stream of Nakdong river. It is developed that the model using the simplified equation that can estimate the daily delivery loads on the side main streams of Nakdong river for a period of having no data of the water quality and flow. The developed model for estimating the daily delivery loads from the main side streams in Nakdong river basin on each item such as BOD, TN, and TP is expressed as Daily delivery load ($\frac{kg}{day}$) = Production load $(\frac{kg}{day}){\times}(1-{\alpha}){\times}(\frac{daily\;runoff}{average\;runoff\;per\;year}){\gamma}$. The estimated values obtained by using the model are almost fit to the calculated values (real data) that have been acquired from the thirteen main side streams in Nakdong river basin. The correlation coefficient values, R, that indicate the correlation between the estimated and the calculated show over 0.7 that mean the estimated values from the used model are adapted to the real data except TN values of Nam-river, Hwang-river, Gam-river, We-river. Especially, the correlation of TP values between the estimated and the calculated implies quite a creditable data to use.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권7호
• /
• pp.1050-1056
• /
• 2014

This study investigated the main factors influencing digester temperature and methods to reduce heat losses during the cold season in the subtropics. Four composite digesters (two insulated and two uninsulated) were buried underground to measure their internal temperature ($^{\circ}C$) at a depth of 140 cm and 180 cm, biogas production and methane ($CH_4$) concentration in biogas from August to February. In parallel the temperature of the air (100 cm above ground), in the slurry mixing tank and in the soil (10, 100, 140, and 180 cm depth) was measured by thermocouple. The influent amount was measured daily and the influent chemical composition was measured monthly during the whole experimental period. Seasonal variations in air temperature significantly affected the temperature in the soil, mixing tank and digester. Consequently, biogas production, which is temperature dependent, was influenced by the season. The main factors determining the internal temperature in the digesters were insulation with Styrofoam, air temperature and temperature of slurry in the mixing tank. Biogas production is low due to the cold climate conditions in winter in Northern Vietnam, but the study proved that storing slurry in the mixing tank until its temperature peak at around 14:00 h will increase the temperature in the digester and thus increase potential biogas production. Algorithms are provided linking digester temperature to the temperature of slurry in the mixing tank.

• 한국작물학회지
• /
• 제62권3호
• /
• pp.157-165
• /
• 2017

Being a staple food for more than half of the population of the world and South Korea, rice is an important crop. For the past 20 years, global paddy rice cultivation area and production have shown an annual growth of 0.46% and 1.61%, respectively. Global rice consumption for food and processing has increased by 1.37% and 3.68%, respectively. Due to the main reason for such increasing human population, it is expected that from 439 million tons in 2010, additional 116 million tons will be needed in 2035. Global rice imports and exports have doubled in the last 20 years. However, in spite of such increment, global rice exports in 2013 were 8.4% of the total production. It is thought that rice protection policies in the producing countries are the main reason for such small scale of rice trading. In the past 5 years, India recorded the largest growth rate in rice exports (51.4%), whereas China showed the largest growth rate in imports (61.0%). For global utilization of milled rice during the same period, approximately 79.4% was used as food, 7.2% as animal feeds, and 1.4% for processing. Regionally, Asia has shown a similar pattern to the global rice usage, whereas utilization for processing in America, for food in Africa, and for animal feed in Europe was relatively higher than the global rice usage. Korea's cultivation area and production since the last 5 years, are 0.5% and 0.8% of those of the world, respectively. Its annual rice export is approximately 3,000 tons, which is 0.01% of the global rice export. Korea's rice utilization is high for food and low for feed and for processing relative to global rice utilization. Therefore, a review must be conducted to increase Korea's utilization of rice for processing and for feed production.

• Fisheries and Aquatic Sciences
• /
• 제21권4호
• /
• pp.9.1-9.7
• /
• 2018

To establish a comprehensive management strategy, as part of the optimization of cultural practice for an oyster rack culture system, we used a numerical model to estimate the primary production in the waters on the eastern coast of Wando island, South Korea. The estimated primary production ranged from 17.12 to $1052.55mgC\;m^{-2}day^{-1}$ ($204.22{\pm}224.75mgC\;m^{-2}day^{-1}$ in average). Except for the times of peak phytoplankton blooms, the estimated primary production (PP) was consistently under $200mgC\;m^{-2}day^{-1}$, which is more similar to the value of PP measured off the western coast of South Korea than the southern coast. No clear relationship was observed between nitrogen content and rainfall with the exception of heavy rainfall events, indicating that precipitation might not be the main source of nutrients in these waters. No clear influence was observed from Doam tidal discharge, located 24 km north from these waters due to main tide comes in this area from the channel between Gunwe-myeon in Wando island and Pukpyeong-myeon in Haenam-gun. Because of the shallow water depth and strong tidal current, resuspension of sediments, which causes an input of nitrogen into the system, could be easily caused by even mild wind and the infrequent passing of ships. Microscopic examination of the phytoplankton composition showed additional contribution of benthic species such as Paralia sulcata into the waters, which increase the productivity of oyster farms in the waters. The availability of nitrate and phosphate for primary production was temporarily limited throughout most of the spring and autumn blooming season.

• Asian-Australasian Journal of Animal Sciences
• /
• 제5권4호
• /
• pp.653-658
• /
• 1992

Crossbred dairy does were fed a roughage diet (IVOMD 56%, N 2.27%) ad libitum, and supplemented with urea-molasses (3% W : W) (UM) at levels on an air dry basis of 1.5% or 3% of liveweight or an iso-energetic, iso-nitrogenous mixture of cottonseed meal and molasses (25 : 75 w : w) (CM). Eight does, four lower-producers and four higher-producers (1.9 and 2.5 kg/day respectively in week 7 of lactation) arranged in two Latin Squares, received each of the four diets for three weeks. Dry matter, digestible organic matter and N intakes were higher for high-producers and high levels of supplement but did not differ between nitrogen sources. Milk production was higher by high-producers; interactions were significant between level of supplement and production group and between level of supplement and N-source, with maximum production by high producers on high levels of CM. The main effects of level of supplement were only significant for production or composition. and total solids; N-source did not have significant effects on liveweight, milk production or composition. We conclude that does of moderate capacity for milk production, receiving a diet of two-thirds moderate quality roughage, one third urea-molasses, will not respond to increased level of supplementation or to replacement of urea with cottonseed meal.

• 수산해양교육연구
• /
• 제28권6호
• /
• pp.1792-1800
• /
• 2016

This study is aimed to analyze the profitability of flatfish fry production farms in the Republic of Korea. The continuous and stable production of flatfish fries is one of important factors that increases the possibility of flatfish aquaculture's success. It is also the basis of aquaculture industry that estimates the quantity and quality of fishery products from aquaculture. Based on the surveyed data, production values and costs of flatfish fry production are estimated and compared to determine the profitability of flatfish fry production by farm. Results show that average return on sales of farms is 21.2%(12.4~26.3%), indicating that flatfish fry production would be profitable under the current production and market conditions. Sensitivity analyses of main variables (survival rate and selling price) indicate that the profitability of flatfish fry production farms can be significantly decreased when the survival rate and selling price would be slightly decreased.

• 품질경영학회지
• /
• 제32권3호
• /
• pp.109-125
• /
• 2004

This paper deals with an optimal process control problem in production of hull structural steel plate with high defective rate. The main quality characteristic(dependent variable) is the internal quality(defect) of plates and is dependent on process parameters(independent variables). The dependent variable(quality characteristics) has three categorical ordinal data and there are 35 independent variables(29 continuous variables and 6 categorical variables). In this paper, we determine the main factors and to develop the mathematical model between internal quality predicted probabilities and the main factors. Secondly, we find out the optimal process condition of main factors through analysis of variance(ANOVA) using simulation. We consider three models to obtain the main factors and the optimal process condition: linear, quadratic, error models.

• International Journal of Computer Science & Network Security
• /
• 제21권3호
• /
• pp.141-144
• /
• 2021

Modern concepts of management of construction production systems require solving the problems of harmonization of the distribution of structural elements on the way to overcoming global destabilization processes. An effective ratio of functional subsystems of production in an environment of mutual influence create sustainable opportunities for production management and contribute to the logical development of the system as a whole in achieving the main goal of harmonious management. The purpose of the study is to develop the concept of effective management of production systems in construction with the harmonious formation of organizational structures. The results of the study allowed to reveal the harmonization approach in improving the interaction of structural elements of production and accelerating their functional sensitivity to changes in the environment. Harmonious production system more effectively adapts to the diversity of interests, goals and actions at all levels of management of different subsystems in any environment.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권3호
• /
• pp.171-177
• /
• 2002

The metabolic flux pattern for L-histidine production was analyzed when glucose and/or acetate were used as carbon sources. Total L-histidine production was enhanced when mixed substrate (glucose and acetate) was used, compared wish that when either glucose or acetate was used as the sole carbon source. Theoretical maximum carbon fluxes through the main pathways for L-histldine production, cell growth, and ATP consumption for cell maintenance were obtained by the linear programming (LP) method. By comparison of the theoretical maximum carbon fluxes tilth actual ones, it was found that a large amount of glucose was actually used for maintenance of cell viability. On the other hand, acetate was used for cell growth. After depletion of acetate in the mixed substrate culture, the flux for glucose to L-histldine synthesis was markedly enhanced. A strategy for effective L-histidine production using both carbon sources was proposed.

• 한국생활과학회지
• /
• 제9권1호
• /
• pp.107-116
• /
• 2000

The purpose of this study was to suggest the data of base for automated underwear manufacture by analyzing the technology of the automated underwear manufacturing facilities in the area of Jeonbuk with a focus on Jeonju and Iksan. The case study samples were 6 underwear firms. The results were as follows : 1. Automated underwear manufacturing systems in the area of JeonBuk introduced over the entire period between 1990 and 1997. Most of Their production type was multi-kind and small-quantity production. 2. They were using Gerber, Assyst, Lectra, Microdynamics and Investronica systems as the CAD/CAM system, of which the Gerber system was mostly used by them. 3. In the stage of production planning and in the stage of preparation for production, most of them realized automation, but in the stage of main production, every firm did not realize automation. In most cases, they used both the stage of mechanization and the stage of unit process automation.