• Journal of Korean Port Research
• /
• v.8 no.2
• /
• pp.1-35
• /
• 1994

The main arterial which runs through the in City of Pusan, carries about 60% of downtown traffic or more, maintains about 20% yearly increase in traffic is severely suffering from the traffic congestion because of concentrated traffic volumes regardless of peak-time periods. The purpose of this study was to grasp the traffic, geometric, and signal conditions of the main arterial through the Videologging System Techniques, perform the transportation system analyses, and finally suggest the improvements which could increase the travel capacity, reduce the average delay and fuel consumption with the optimal conditions of signal system. The following conclusions were drawn : firstly the traffic system should be shifted for the travel distribution on the arterial during the peak time periods, secondly the roadway system of the arterial reviewed for left-turn traffic during the peak time periods, and thirdly the signal system of intersection reconstructed for signal optimization or progression within the range of cycle length suggested.

• Korean Journal of Materials Research
• /
• v.12 no.11
• /
• pp.870-874
• /
• 2002

$Mg_2$$SiO_4$: Dy, Tb pellets were made by using a sintering process, including pressing and heat treatment. In the present study, the optimum parameters of the sintering for the $Mg_2$$SiO_4$: Dy, Tb pellets obtained such as the pressing pressure, the sintering temperature and the sintering time were in terms of thermoluminescence. Experimental results showed that the main peak of the glow curve for $Mg_2$$SiO_4$: Dy, Tb thermoluminescence dosimeter was clearly correlated with the energy of the UV and with the grain size. The intensity of the TL glow curve increased and its main peak position shifted to lower temperature with increasing UV irradiation time.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.12
• /
• pp.1347-1351
• /
• 2004

The ZnGa$_2$O$_4$ phosphor target was synthesized through solid-state reactions as calcine and sintering temperature in order to deposit ZnGa$_2$O$_4$ Phosphor thin film by rf magnetron sputtering system. The x-ray diffraction patterns of ZnGa$_2$O$_4$ phosphor target showed the position of (311) main peak. The cathodoluminescence(CL) spectrums of ZnGa$_2$O$_4$ phosphor target showed main peak of 370 nm to 400 nm, and maximum intensity at the calcine temperature of $700^{\circ}C$ and sintering temperature of 130$0^{\circ}C$. It was possible to prepare The ZnGa$_2$O$_4$ phosphor thin film with synthesized ZnGa$_2$O$_4$ phosphor target and The prepared ZnGa$_2$O$_4$ phosphor thin film showed the position of (311) main peak.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.1
• /
• pp.133-140
• /
• 1995

This investigation was undertaken for the purpose of studying the changes of pectic substances in alcohol insoluble solids(AIS) extracted from cucumbers pickled in salt. The preparation methods were brining the cucumbers in 10% NaCl solution (bolied, method A), 20% NaCl solution(bolied, method B) and 20% NaCl solution(cool to $25^{\circ}C$ after boiling, method C). The composition ratio of hot water soluble pectin(HWSP) in AIS decreased during brining, while that of 0.4% sodium hexametaphosphate soluble pectin(NaSP) increased remarkably. The contents of Ca and Mg in AIS increased regardless of preparation methods used. By DEAE-cellulose chromatography, HWSP from fresh and brined cucumbers were divided into six fracitons. 0.2M peak was the main fraction in fresh cucumber, whereas 0.05M and 0.2M peak were the main fraction in pickled cucumbers. On the other hands, NaSP from fresh and brined cucumbers were divided into five fractions and 0.4M peak was the main fraction. However, the composition ratios of galacturonic acid and neutral sugar of 0.4M fraction in brined cucumbers were higher than those of fresh cucumber.

• Physical Therapy Korea
• /
• v.16 no.3
• /
• pp.1-8
• /
• 2009

It is important to find the effective position for cough and sputum clearance in respiratory physical therapy. The purpose of this study was to compare the changes in peak expiratory flow (PEF), forced expiratory volume in 1 second ($FEV_1$), and peak cough flow (PCF) related to functional level and measurement position in patients with Duchenne muscular dystrophy. Twenty one subjects were classified into three functional levels, and measurements was undertaken in three different measurement positions (upright sitting, $45^{\circ}$ reclining and supine). Vitalograph PEF/FEV DIARY was used to measure PEF and $FEV_1$, and Ferraris Pocket Peak was used to measure PCF. Mixed two-way analysis of variance and Bonferroni post-hoc test were used for statistical analysis. The results of the study were as follows: 1) Significant main effects for measurement position were found. 2) PEF was the highest in upright sitting, followed by $45^{\circ}$ reclining, and supine in order. 3) $FEV_1$ in upright sitting and $45^{\circ}$ reclining were significantly greater compared with that in supine. 4) PCF in upright sitting and $45^{\circ}$ reclining were significantly greater compared with that in supine. 5) No significant main effects for functional level were found in PEF, $FEV_1$, and PCF. 6) No significant functional level by measurement position interactions were found in PEF, $FEV_1$, and PCF. Therefore, it is concluded that upright sitting and $45^{\circ}$ degree reclining positions are recommended for effective cough and sputum clearance.

• Microbiology and Biotechnology Letters
• /
• v.38 no.3
• /
• pp.278-282
• /
• 2010

In this study, the antibacterial activity and component analysis of Persicaria perfoliata extracts were investigated. MIC (Minimum Inhibitory Concentration) values of ethyl acetate fraction from P. perfoliata on Escherichia coli, Propionibacterium acnes, and Staphylococcus aureus were 0.25%, equally. The results showed that the antibacterial activity of the ethyl acetate fraction was the highest in the S. aureus and P. acnes. Ethyl acetate fraction from P. perfoliata extracts showed 5 bands in TLC and 8 peaks in HPLC (320nm). In HPLC chromatogram of ethyl acetate fraction, first main peak 2 (24.99%) and peak 3 (22.65%) were identified as quercetin-3-o-glucuronide and isoquercitrin in the order of elution time. Also, in HPLC chromatogram of deglycosylated fraction, main peak 2 (76.93%) was identified as quercetin in the order of elution time. And these components are very effective as antioxidants. Thus, these results indicate that extract/fractions of P. perfoliata can be applicable to new functional cosmetics for antioxidant, antibacterial activity.

• Journal of radiological science and technology
• /
• v.21 no.1
• /
• pp.59-64
• /
• 1998

[ $CaSO_4$ ] thermoluminescent phosphors was made by sintring the $CaSO_4$ after doping the transition elements Tm, Pd, Dy, V, Mo, Zr. The maximum Peaks are found in the measured $CaSO_4$(Tm, Pd, Dy, V, Mo, Zr) TL glow curve at $130^{\circ}C,\;110^{\circ}C,\;140^{\circ}C,\;100^{\circ}C$, and $120^{\circ}C$ when the heating rate is $5^{\circ}C/sec$. The activation energy of the main peak has been estimated by the peak shape method. The estimated activation energies are 1.02eV, 1.32eV, 1.12eV, 0.80eV, and 1.17eV, respectively. The thermoluminescence process in $CaSO_4$(Tm, Pd, Dy, V, Mo, Zr)are found to the 2nd order when the main peak of the glow curve is analyzed by peak shape method. The dose responses of $CaSO_4$(Tm, Pd, Dy, V, Mo, Zr) phosphors are linear within $4{\times}10^{-4}{\sim}1Gy$ of X-rays.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.431-434
• /
• 2005

Generally, noise in a reciprocating compressor is attributed to the driving force of a pump. However, close examination shows that the noise heard by customers finally results from radiation of a shell in a compressor, the noise caused by both transmission through a shell and resonance with the natural frequency of a shell. Therefore, the peak frequencies contributing to the overall level of a compressor' noise are closely concerned with vibration of a shell. That's why radiated noise by vibration can be reduced by changing the mode of a shell and by shifting the peak frequencies to other ranges, which are not globally related with the overall noise level. In this paper, the main peak frequencies are analyzed to reduce the radiated noise of a shell, and the vibration characteristics of a shell are examined through Frequency Response Function and Finite Element Analysis. Moreover, the Operational Deflection Shape for a shell is measured with consideration of real driving force of a pump. Finally, the optimum position on a shell, closely related to the main peak frequencies, is found, and the overall noise level caused by radiated noise of a shell is noticeably reduced by mass or stiffness modification of the position.

• Structural Engineering and Mechanics
• /
• v.53 no.5
• /
• pp.1031-1049
• /
• 2015

This paper highlights the role of innovative vibration control system based on two promising properties in a parallel configuration. Hybrid device consists of two main components; recentering wires of shape memory alloy (SMA) and steel pipe section as an energy dissipater element. This approach concentrates damage in the steel pipe and prevents the main structural members from yielding. By regulation of the main adjustable design parameter, an optimum performance of the device is obtained. The effectiveness of the device in passive control of structures is evaluated through nonlinear time history analyses of a five-story steel frame with and without the hybrid device. Comparing the results proves that the hybrid device has a considerable potential to mitigate the residual drift ratio, peak absolute acceleration and peak interstory drift of the structure.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.3
• /
• pp.208-213
• /
• 1998

Microwave dielectric properties of $BiNbO_4$ containing CuO and $V_2O_5$(BN ceramics). BN ceramic with 0.07wt% $V_2O_5$ and 0.03wt% CuO (BNC3V7) was sintered at $900^{\circ}C$ where it is possible for these to be co-fired with Ag electrode. The dielectric constant of 44.3, TCF (Temperature Coefficient of resonance Frequency) of 2 ppm/$^{\circ}$ and Q${\times}f_o$ value (product of Quality value and resonance Frequency) of 22,000GHz could be obtained from those ceramics. It is observed that orthorhombic structure was stable $1000^{\circ}C$. As sintering temperature increases, the dielectric properties decreased. The main reasons were abnormal grain growth and the main peak of triclinic moved from the main peak of orthorhombic.