• Imaging Science in Dentistry
• /
• v.50 no.1
• /
• pp.1-7
• /
• 2020

Purpose: This study was performed to evaluate the magnitude of artifacts produced by gutta-percha and metal posts on cone-beam computed tomography (CBCT) scans obtained with different tube currents and with or without metal artifact reduction (MAR). Materials and Methods: A tooth was inserted in a dry human mandible socket, and CBCT scans were acquired after root canal instrumentation, root canal filling, and metal post placement with various tube currents with and without MAR activation. The artifact magnitude was assessed by the standard deviation (SD) of gray values and the contrast-to-noise ratio (CNR) at the various distances from the tooth. Data were compared using multi-way analysis of variance. Results: At all distances, a current of 4 mA was associated with a higher SD and a lower CNR than 8 mA or 10 mA (P<0.05). For the metal posts without MAR, the artifact magnitude as assessed by SD was greatest at 1.5 cm or less (P<0.05). When MAR was applied, SD values for distances 1.5 cm or closer to the tooth were reduced (P<0.05). MAR usage did not influence the magnitude of artifacts in the control and gutta-percha groups(P>0.05). Conclusion: Increasing the tube current from 4 mA to 8 mA may reduce the magnitude of artifacts from metal posts. The magnitude of artifacts arising from metal posts was significantly higher at distances of 1.5 cm or less than at greater distances. MAR usage improved image quality near the metal post, but had no significant influence farther than 1.5 cm from the tooth.

• Journal of KIISE:Databases
• /
• v.35 no.6
• /
• pp.481-494
• /
• 2008

In this paper we propose Fourier magnitudes based privacy preserving clustering on time-series data. The previous privacy-preserving method, called DFT coefficient method, has a critical problem in privacy-preservation itself since the original time-series data may be reconstructed from privacy-preserved data. In contrast, the proposed DFT magnitude method has an excellent characteristic that reconstructing the original data is almost impossible since it uses only DFT magnitudes except DFT phases. In this paper, we first explain why the reconstruction is easy in the DFT coefficient method, and why it is difficult in the DFT magnitude method. We then propose a notion of distance-order preservation which can be used both in estimating clustering accuracy and in selecting DFT magnitudes. Degree of distance-order preservation means how many time-series preserve their relative distance orders before and after privacy-preserving. Using this degree of distance-order preservation we present greedy strategies for selecting magnitudes in the DFT magnitude method. That is, those greedy strategies select DFT magnitudes to maximize the degree of distance-order preservation, and eventually we can achieve the relatively high clustering accuracy in the DFT magnitude method. Finally, we empirically show that the degree of distance-order preservation is an excellent measure that well reflects the clustering accuracy. In addition, experimental results show that our greedy strategies of the DFT magnitude method are comparable with the DFT coefficient method in the clustering accuracy. These results indicate that, compared with the DFT coefficient method, our DFT magnitude method provides the excellent degree of privacy-preservation as well as the comparable clustering accuracy.

• Publications of The Korean Astronomical Society
• /
• v.23 no.2
• /
• pp.65-71
• /
• 2008

It has been considered that 'exhausted eclipses' (日食旣) were total eclipses. However, modern precise calculations show that a significant fraction of such records are not realized to be total. Thus we doubt that the two concepts are equivalent. Here we investigate the meaning of 'exhausted eclipses' in the east-Asian history. We first find that eclipses of magnitude greater than 0.8 were regarded as 'exhausted eclipses' by a Korean astronomer of the 18th-century Choson dynasty. His notion was based upon the definition of 'exhausted eclipses' in the ephemerides of pre-modern Chinese dynasties. According to those ephemerides, the 'exhausted eclipses', whose magnitude is greater than 0.8, have the first contact at the western part of the solar disk and the fourth contact at the eastern part of the solar disk. A simple geometrical calculation shows that such cases really occur when the magnitude of eclipse is greater than 0.7. We pointed out that such an ancient definition might not be impractical for ancient astronomers, because the uncertainty of eclipse magnitude estimated by ancient Chinese ephemerides was 10% and the human sight has a spatial resolution of 1.2 arcmin, which is approximately one twentieth of the Sun's angular diameter.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.10
• /
• pp.990-999
• /
• 2007

We deal with second order NMP(Non-Minimum Phase) systems which are difficult to control with conventional methods because of their inherent characteristics of undershoot. In such systems, reducing the undesirable undershoot phenomenon makes the response time of the systems much longer. Moreover, it is impossible to control the magnitude of undershoot in a direct way and to predict the response time. In this paper, we propose a novel two sliding mode control scheme which is capable of determining the magnitude of undershoot and thus the response time of NMP systems a priori. To do this, we introduce two sliding lines which are in charge of control in turn. One is used to stabilize the system and achieve asymptotic regulation eventually like the conventional sliding mode methods and the other to stably control the magnitude of undershoot from the beginning of control until the state meets the first sliding line. This control scheme will be proved to have an asymptotic regulation property. The computer simulation shows that the proposed control scheme is very effective and suitable for controlling the second order NMP system because it can decide the magnitude of undershoot in a direct and stable way and reduce the response time compared with the conventional ones.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.5
• /
• pp.427-433
• /
• 2016

This paper proposes a new method for the current ripple reduction of a three-phase interleaved bidirectional DC-DC converter. Usually, the three-phase interleaved bidirectional DC-DC converter is used for battery charging and discharging to reduce battery current ripple. In V2G application, a PWM AC-DC converter is used to connect the AC power grid and three-phase interleaved bidirectional DC-DC converter for battery charging and discharging. The magnitude of DC link voltage affects the battery current ripple magnitude. Therefore, the magnitude of the battery ripple current is analyzed with variations of battery and DC link voltages. The ripple current magnitude is found to be minimized by controlling the DC link voltage. Simulation and experimental results show the usefulness of the proposed method.

• Journal of Broadcast Engineering
• /
• v.19 no.6
• /
• pp.967-970
• /
• 2014

An efficient peak detection algorithm in magnitude spectrum is proposed to distinguish the M-frequency shift keying(FSK) signals from other digitally modulated signal. In addition, recognition of the modulation order estimation of FSK signals is also studied based on the fact that the magnitude spectrum of FSK signals reveals the number of peaks equal to the modulation order. When no a priori information about the signals, we utilize the histogram of the magnitude spectrum to determine the threshold which is important factor in peak detection algorithm. The simulation results show high probability of classification under 500 symbols and signal-to-noise ratio(SNR) higher than 4dB.

• The Journal of the Korea Contents Association
• /
• v.15 no.4
• /
• pp.342-349
• /
• 2015

The objective of this study was to compare the unimanual and bimanual complementary movements of the affected upper extremity. Thirty participants living in Busan area with post-stroke hemiparesis were involved in this study. They were selected according to twelve criteria. We used the Fitmeter accelerometer to measure Signal Vector Magnitude, peak acceleration and peak deceleration. The movement time and Signal Vector Magnitude of bimanual complementary movement were less than those of unimanual movement(p<0.05). Therefore, we suggest that bimanual complementary movement is more useful, as for the kinematic aspect, than unimanual movement when a person with stroke perform activities of daily living.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.1
• /
• pp.67-73
• /
• 2017

In this paper, we investigate the observations of Venus in daytime that are recorded in the Goryeosa (History of the Goryeo Dynasty, A.D. 918-1392). There are a total of 167 accounts of such observations in this historical book, spanning a period of 378 yr (from 1014 to 1392). These include six accounts where the days of the observation are not specified and two accounts where the phase angles are outside the calculation range of the equation used in our study. We analyze the number distribution of 164 accounts in 16 yr intervals covering the period from 1023 to 1391. We find that this distribution shows its minimum at around 1232, when the Goryeo dynasty moved the capital to the Ganghwa Island because of the Mongol invasion, and its maximum at around 1390, about the time when the dynasty fell. In addition, we calculate the azimuth, altitude, solar elongation, and apparent magnitude of Venus at sunset for 159 observations, excluding the eight accounts mentioned above, using the DE 406 ephemeris and modern astronomical algorithms. We find that the average elongation and magnitude of Venus on the days of those accounts were ${\sim}40^{\circ}$ and -4.5, respectively, whereas the minimum magnitude was -3.8. The results of this study are useful for estimating the practical conditions for observing Venus in daylight with the naked eye and they also provide additional insight into the corresponding historical accounts contained in the Goryeosa.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.1
• /
• pp.44-51
• /
• 2000

In this paper, using a wide-band AE sensor with the frequency range from 100[kHz] to 1.5[kHz], the frequency spectra of AE signals generated from the corona discharges of the needle-plane gap and from the partial discharges of an epoxy void were analyzed to determine the proper ultrasonic sensor with optimum frequency range according to the patterns of corona discharges. We also examined the propagation characteristics of AE signals in oil and the relationship between the magnitude of corona discharge and the magnitude of AE signals in peak-to-peak value under the application of 60[Hz] ac high-voltage. From these results, the main frequency spectra of AE signals emitted from the corona discharges of the needle-plane gap were about 130[kHz] by the fast fourier transform, but the main frequency spectra appeared to be 230[kHz] in the partial discharges of an epoxy void. The magnitude of AE signals was proportional to the magnitude of corona discharge and discharge current pulse with increasing the applied voltages.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.1
• /
• pp.114-119
• /
• 2006

This paper reports the investigation results on the leakage currents (LC) on polymeric outdoor insulators. The samples used were EPDM (ethylene prophylene diene monomer) insulators used at 20 kV distribution lines. AC voltage was applied and the LC waveforms were measured under various environmental conditions (humidity and pollution). Digital data of the LC was transferred from a digital storage oscilloscope to a computer for further analysis. The LC waveform parameters such as magnitude and harmonic content (as indicated by the total harmonic distortion (THD)) were analyzed. The experimental results showed that 3rd, 5th and 7th harmonics and higher odd harmonics were observed for symmetrical-distorted LC waveforms while for unsymmetrical-distorted LC waveforms, odd and even harmonics were observed. The LC analysis indicated that there are 5 stages of insulator conditions from normal condition up to flashover correlated with different kind of LC waveforms. The results also showed that in general the magnitude of LC was good enough to show the condition of the insulators. However, under discharge condition (for example as a result of dry band arching) the LC magnitude should be combined by the THD to show a better correlation with the insulator condition. The product between THD and LC magnitude may be used as a diagnostic parameter.