• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.4
• /
• pp.9-18
• /
• 2001

• Journal of the Korean Magnetics Society
• /
• v.5 no.4
• /
• pp.299-303
• /
• 1995

In order to improve the read-out signal waveform, a shielded magnetoresistive (SMR) head has been designed and studied by applying the transmission-line model. The bias and signal field distribution, the voltage output, the harmonic output signal and resistance value of MR element are simulated as functions of bias current and recording displacement. The results show that the SMR head has good linear character with respect to the medium recording signal in high recording frequency of about 2.5 MHz. The amplitude and waveform of reroduction signal have been obviously improved. The saturation effect on the symmetry and amplitude of reproducing output have also been analyzed.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.3
• /
• pp.258-265
• /
• 1991

In this paper, perpendicular magnetic recording system which consists of a single pole head and a double layer medium has been analyzed by using 2D-finite element method and preisach model for describing hysteresis characteristics. To verify the validity of this method, we compare the calculated magnetic field intensity which is above the isolated transition of magnetization with scaled up experimental data published in reference [7]. The results show good agreements within 7% error bounds and it is therefore concluded that this method will be very useful to analyze perpendicularmagnetic recording system with hysteresis characteristics.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.12
• /
• pp.1565-1571
• /
• 1995

Misalignment of recording head position results in inter-track interference (ITI), which is a primary factor limiting radial(track) density in current digital magnetic channels. This paper proposes a multi- channel adaptive PRML for digital high-density recording channels, and compares it with the conventional single-channel PRML in the presence of ITI for the per- formance evaluation. Simulation results show that the proposed method removes ITI effectively when heal-misalignment occurs, then improving its performance significantly as compared with the single- channel PRML. As a result, it is confirmed that multi-channel adaptive PRML is well suited for high-density recording in digital magnetic channels.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1C
• /
• pp.45-49
• /
• 2004

An image enhancement method using modified anisotropic diffusion filter is proposed in this paper. It employs sensor noise estimation and scale space methods based on the minimum reliable scale. Then the anisotropic diffusion filter is modified by the calculated critical value function and local gradient. Through simulation, it is verified that the proposed algorithm has the capability of little or no noise amplification in homogenous region as well as superior edge enhancement.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.12a
• /
• pp.137-137
• /
• 2003

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.261.1-261.1
• /
• 2007

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.122-126
• /
• 2001

Magnetic hard disk drive is continually being pushed to reduce head-disk spacing for higher recording densities. The current minimum spacing between the air-bearing slider and disk has been reduced to under 15 nm. In this work, it was investigated if flying height could be lowered under the height of laser bumps. With the reduction of the spinning speed, the flying height was decreased under the height of laser bumps. When a head swept between landing zone and data zone, the head-disk impact was monitored using AE and friction signals. It is demonstrated that magnetic hard disk drive could be operated without tribological failures under the height of laser bumps.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.112.1-112.1
• /
• 2007

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.180-181
• /
• 2002

수직기록매체에서 기록 밀도가 증가하기 위해서는 bit의 크기를 줄여야 하고, 이를 위해서는 writing head의 width와 thickness를 줄여야 한다. 그러나 head의 크기가 줄어들면 기록층의 자화를 반전시키기에 충분한 write field를 얻지 못한다. 이를 극복하기 위해 head의 tip부분을 trimming을 하여 작은 pole tip 크기를 가지면서도 큰 write field를 얻고, 여분의 magnetic field를 얻기 위해 soft underlayer를 도입하는 이중층 수직기록 매체가 제안되고 있다. (중략)