• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.618-621
• /
• 2008

The magnetic recording system shows the difference of the magnetic recording density according to the direction of the magnetic field. The yoke shape of the recording system affects the magnetic field direction; therefore, the recording density may be raised by changing the shape. This paper intends not only to increase the magnetic flux density of the record region but also to reduce the recording loss of a specific region through the simultaneous design of the yoke and the magnet. The recording loss can be reduced by minimizing the magnetic flux of the adjacent area to the recording region. The topology optimization method is used to obtain the optimal shape both of the yoke and the magnet. And the commercial package, Maxwell is used to verify the result.

• 한국통신학회논문지
• /
• 제37A권10호
• /
• pp.821-826
• /
• 2012

Two-dimensional magnetic recording (TDMR) is treated as the next generation magnetic recording method, but because of its high channel bit error rate, it is difficult to use in practices. In this paper, we introduce a new writing method that can decrease the nonlinear media error effectively, and it can also achieve 10 Tb/$in^2$ of user bit density on a magnetic recording medium with 20 Teragrains/$in^2$.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2732-2741
• /
• 2000

Combination of magnetic recording technology and optical recording technology such as Near Field Optical Recording is watched recently. In order to accomplish this technology, the development of an electromagnetic driven mm-sized mirror shifting laser beam in track direction have to needed. In Near Field Optical Recording System, shifting laser beam in track direction mean as fine tracking and means as coarse tracking. Therefore in Near Field Optical Recording, 2-stage actuator is composed of servo controller in reading or recording information on disc layer. In our research, through design and simulation process of driven mm-sized mirror, we arrange systematically design process of driven mm-sized mirror having good frequency transfer characteristics. Design and simulation processes included modal analysis of spring, calculation of magnetic moment according to the number of turns and geometric configuration of coil and magnetic circuit analysis meaning that calculation of magnetic flux density in air gap of magnetic circuit. After that we design and make parts of driven mm-sized mirror, assemble and evaluate our electriomagnetic driven mm-sized mirror. we compared design values with actual characteristic values and present solution scheme. Through these processes we performed manufacturing of an electromagnetic driven mm-sized mirror having good frequency-domain characteristics and high sensitivity characteristics.

• Journal of Magnetics
• /
• 제2권4호
• /
• pp.147-156
• /
• 1997

An artificially modulated magnetic Co/Pd multilayer is one of the promising candidates for high density magneto-optic (MO) recording media, due to a large Kerr rotation angle in the wavelength of a blue laser beam. However, since multilayer structure, as well as amorphous structure, is a non-equilibrium state in terms of free energy and a MO recording technology is a kind of thermal recording which is conducted around Curie temperature (Tc) of the recording media, when the Co/Pd mulilayer is used for the MO recording media, changes in the magnetic properties are occurred as the amorphous structure do. Therefore, the assessment of the magnetic properties in the Co/Pd multilayer during interdiffusion is crucially important both for basic research and applications. As the parameter of the magnetic properties in this research, saturation magnetization and perpendicular magnetic anisotropy energy of the Co/Pd multilayer are measured in terms of Ar sputtering pressure and heat treatment temperature. Form the results of the research, we find out that the magnetic exchange energy between Co and Pd sublayers strongly affects the changes in the magnetic properties of the Co/Pd multilayers during the interdiffusion in ferromagnetic state. This discovery will provide the understanding of the magnetic exchange energy in the Co/Pd multilayer structure and suggest the operating temperature range for MO recording in the Co/Pd multilayer for the basic research and applications, respectively.

• 한국자기학회지
• /
• 제1권2호
• /
• pp.74-78
• /
• 1991

수치해석을 이용하여 자기기록장치를 구성하는 여러 요소들이 정보의 기록 또는 재생에 미치는 영향을 해석할 수 있는 방법을 기술하고 이것을 수직자기기록장치에 적용하여 기록밀도의 변화에 따른 재생전압의 형태을 구하였다. 자기기록장치에서 정보가 기록되는 것은 기록매체의 히 스테리시스현상에 기인하는 것이므로 수치해석시 히스테리시스 특성을 고려해 주어야 한다. 본 논 문에서는 Preisach 모텔과 유한요소법을 이용하여 히스테리시스 특성을 포함하는 자기기록장치의 기록 및 재생의 전과정을 해석할수 있는 수치해석 기법을 확립하고, 이 방법으로 자기기록장치의 여러요소에 대한 영향을 구할수 있음을 보이기 위하여 이것을 수직자기 기록장치에 적용하여 기록 밀도가 17[KFRP]에서 254[KFRPI]까지 증가할때 기록과정에서 주어진 전류파형에 대하여 매체에 기록된 자화량을 구하고, 재생과정에서 헤드에 유기되는 전압을 기록밀도 증가에 따른 재생전압크기 의 변화를 구하였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.41.1-41.1
• /
• 2007

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.463-465
• /
• 2002

In order to increase perpendicular magnetic anisotropy of magnetic layer and prepare magnetic recording layer with a good quality by epitaxial growth between magnetic layer and, we prepared Co$\_$77/Cr$\_$20/Ta$_3$/Si doublelayer for perpendicular magnetic recording media which was promoted as next generation recording media on slide glass substrate. The thickness of magnetic layer and Underlayer were varied from 20 to 100 nm and 5 to 100 m, respectively. The surface morphology and crystal structure of the CoCrTa/Si film were examined with XRD and AFM. Prepared thin films showed improvement of dispersion angle of c-axis orientation Δ$\theta$$\_$50/ caused by inserting amorphous Si underlayer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.28-31
• /
• 1990

In perpendicular magnetic recording system, the magnetic recording and reproduction characteristics of isolated transition of magnetization is simulated in this paper. The recording system which is magneto-static system is analyzed using two-dimensional finite element method and the characteristics of hysteresis of recording media is considered. The results show that the optimizing current is exist in magnetic recording system.

• 한국자기학회지
• /
• 제16권2호
• /
• pp.149-156
• /
• 2006

자기 기록 시스템은 시간의 흐름에 따라 기록 밀도는 높아지고 있고 또한 기록 속도 역시 빨라지고 있다. 더욱 빠른 기록 속도의 요구 치로 인하여 자기 기록 헤드에 인가되어지는 기록 주파수 역시 높아져야 하고 또한 기록이 일어나는 기록 미디어의 회전 속도 역시 빨라져야 한다. 이와 같은 두 가지 요건은 헤드와 기록 미디어에서 와전류를 발생시키게 된다. 기록 헤드에서는 기록 주파수에 의해 발생되는 와전류가 존재한다. 그리고 기록 미디어에서는 기록 주파수에 의해 발생되는 와전류와 회전하는 미디어의 선속도에 의해 발생하는 와전류가 존재하게 된다. 본 논문에서는 비선형 3차원 유한 요소법을 이용하여 자기 기록 헤드에서 발생하는 와전류와 기록 미디어에서 발생하는 두 종류의 와전류의 분포를 분석하고 이와 같이 발생한 와전류가 자기 기록시스템에서 자기 기록 필드에 미치는 영향에 대해서 연구하였다.

• Journal of Magnetics
• /
• 제8권4호
• /
• pp.164-168
• /
• 2003

In high density recording system, the recording head field on a medium should be focused in small bit area and should have a sufficient value to overcome the medium coercivity, which resulted in head saturation. In this paper, an efficient method to access the head field and field gradient considering head saturation is presented. The magnetic vector potential on the head surface is pre-calculated considering head saturation in several cases and accumulated into database. The head field on the recording media is easily produced solving Laplace equation using accessed magnetic vector potential boundaries. The computed head field is compared with a quantified magnetic force microscopy measurement.