Fe-l7Cr-2M(M=Si, Nb, Mo)합금분말을 Electrode Rotating Atomizer로 제조한 후 성형하여 소결한 시편의 첨가원소, 성형 압력 및 소결온도 에 따른 교류자기특성의 변화를 체계적으로 조사하였다 제조된 Fe-l7Cr-2M(M=Si, Nb, Mo) 합금분말의 형상은 구형이며, 포화자화값은 Mo와 Nb을 첨가한 Fe-l7Cr-2Mo과 Fe-l7Cr-Nb의 경우 약 155 emu/g로 Si을 첨가한 경우보다 크다. 성형압력 12 ton/$cm^2$, 소결온도 1200 $^{\circ}C$에서 제조된 Fe-l7Cr-2M(M=Si, Nb, Mo)합금분말 소결체의 진폭비 투자율은 주파수, f=1 kHz에서 3~5 Oe의 인가자장 범위에서 가장 크다. 전력손실은 인가자장 H$_{a}$ =5 Oe, 주파수 f=1 kHz에서 Fe-l7Cr-2Nb 경우 40 mW/cc로 Si이나 Mo를 첨가한 경우 보다 약 1/2값을 나타낸다.
미세플라스틱은 매우 중요하고 심각한 환경 문제로 인식되어, 전세계적으로 관심이 증대하고 있다. 플라스틱은 저렴한 가격, 경량성, 우수한 가공성, 다양한 재질별 특성을 가지고 있어 산업이 발전함에 따라서 생산량과 폐기량 또한 급격하게 증가하고 있다. 특히, 최종적으로 해양 환경으로 유입되어 생태계에 큰 영향을 줄 것으로 예상하고 있어, 이에 대한 처리가 매우 시급한 문제이다. 그러나 작은 입자크기와 함께 존재하는 환경이 다양하기 때문에 일반적인 처리방법의 적용이 어려워 다양한 분야에서 많은 연구가 진행되고 있다. 특히, 기존에 광물을 처리하는 선광공정 중 비중, 자력, 정전선별 등의 방법을 미세플라스틱의 처리에 적용하는 연구가 다수 진행되고 있으나 아직 실험실 단계이기 때문에 효율적인 처리를 위한 선별기술의 개발이 시급한 실정이다.
청주 비중리 석조여래삼존상 및 석조여래입상은 6세기 고구려 불상의 양식을 갖춘 중요한 국가지정문화재(보물)이다. 이들 석불상의 보존현황 파악 및 보존계획 수립을 위해 보존과학적 조사를 수행하였다. 석조여래삼존상 및 석조여래입상의 구성암석은 세립 내지 중립의 전형적인 흑운모화강암으로, 0.2(×10-3 SI unit) 미만의 낮은 대자율 분포, 구성광물에서 서로 유사한 특성을 보여 동일한 기원의 암석으로 판단된다. 석조여래삼존상은 인근 노두의 암석과 광물 조성 및 입도, 전암대자율, 지구화학적 특성이 매우 유사하였으므로 성인적 동질성이 높은 것으로 해석된다. 한편 비중리 석조불상에서는 물리적, 화학적, 생물학적 요인이 복합적으로 작용하고 있는 것으로 확인되었다. 특히 석조여래삼존상과 여래입상 모두 전면에서 탈락이, 후면에서 균열과 박리박락이 우세한 경향을 보였다. 야외에 위치한 석조여래입상에서는 입상분해와 흑색조류가 발달하여 열악한 보존환경과 함께 풍화를 가속화하고 있다. 초음파속도를 이용한 비파괴 물성진단 결과, 석조여래삼존상과 여래입상의 풍화등급은 완전 풍화된 상태(CW)로 나타나 매우 낮은 물성을 지시하였다.
경남 고성 상족암 일대는 화석, 연흔, 암맥, 주상절리 등 다양한 지질유산이 분포하고 있어 천연기념물 제411호(고성 덕명리 공룡과 새발자국 화석산지)로 지정되었다. 이 중 상족암의 주상절리는 해안에 인접하고 있어 아름다운 해안 경관을 이루고 있으며, 전체적인 형상은 거대한 병풍 모양을 연상케 하여 병풍바위라 불린다. 병풍바위에는 하위 퇴적층과의 경계면에 수직한 방향으로 주상절리가 특징적으로 발달하고 있다. 이번 연구에서는 병풍바위에 나타나는 주상절리를 대상으로 야외 및 현미경 관찰, 전암대자율 분석, X-선 회절 분석, 지화학 분석 등 암석 광물학적 연구와 대자율이방성(AMS) 분석을 통한 자기미세구조 연구를 수행하여 병풍바위와 주상절리의 형성과정에 대해 논의하였다. 병풍바위에 나타나는 산성 암상의 화학조성은 유문암의 조성을 가지며, 석영, 장석, 백운모, 견운모, 불투명광물 등이 관찰된다. 병풍바위에 대한 대자율이방성 분석 결과, 각 지점에서 입자들의 장 단축 방향을 나타내는 $k_1$과 $k_3$의 군집도가 매우 높게 나타나며, 납작한 형태의 엽리구조가 발달하고 있는데 이는 암맥, 용암류보다는 암상에서 발달하는 석리(rock fabric)로 해석된다. 결론적으로 병풍바위는 퇴적층의 층리면을 따라 관입한 암상이며, 주상절리는 관입한 유문암질 마그마의 냉각에 따른 수축에 의해 형성되었다. 이번 연구는 향후 국내에 분포하는 주상절리의 형성 메커니즘을 이해하는데 기초 자료로 활용할 수 있을 것이라 판단된다.
천리안위성(2010년 발사)의 성공적인 개발을 바탕으로 두 기의 위성을 동시에 개발하는 정지궤도 복합위성(GEO-KOMPSAT-2) 프로그램이 진행 중이다. 정지궤도 복합위성 중 GEO-KOMPSAT-2A(GK2A)위성에는 차세대 고성능 기상 탑재체와 우주기상 탑재체가 개발 탑재될 예정이다. 국내 주도로 개발되는 우주기상 탑재체는 대한민국 최초의 정지궤도용 우주기상 센서가 될 예정이다. 세 가지 종류의 우주기상 탑재체(고에너지 입자 검출기, 자력계, 위성 대전 감시기)는 정지궤도에서 우주공간에 대한 물리적 현상(고에너지 입자 분포, 지구 주위의 자기장, 위성 대전 전류)을 관측하여 우주기상 예 경보에 활용될 목적을 가지고 있다. 본 논문에서는 GK2A위성의 부탑재체인 우주기상탑재체 개발 요구사항, 시스템 설계 및 접속 설계에 대해 요약 기술하였다.
Electrospinning process is the useful and unique method to produce nanofibers from metal precursor and polymer solution by controlled viscosity. In this study, the NiZn ferrite nanofibers were prepared by electrospinning with a aqueous metal salts/polymer solution that contained polyvinyl pyrrolidone and Fe (III) chloride, Ni (II) acetate tetrahydrate and zinc acetate dihydrate in N,N-dimethylformamide. The applied electric field and spurting rate for spinning conditions were 10 kV, 2 ml/h, respectively. The obtained fibers were treated at $250^{\circ}C$ for 1 h to remove the polymer. Finally, the NiZn ferrite fibers were calcined at $600^{\circ}C$ for 3 h and annealed at $900{\sim}1200^{\circ}C$ in air. By tuning the viscosity of batch solution before electrospinning, we were able to control the microstructure of NiZn ferrite fiber in the range of $150{\sim}500\;nm$ at 770 cP. The primary particle size in $600^{\circ}C$ calcined ferrite fiber was about 10 nm. The properties of those NiZn ferrite fibers were determined from X-ray diffraction analysis, electron microscopy, energy dispersive spectroscopy, Fourier transform infrared spectroscopy, thermal analysis, and magnetic measurement.
Nanostructured materials arecurrently receiving much attention because of their unique structural andphysical properties. Research has been stimulated by the envisagedapplications for this new class of materials in electronics, optics, catalysisand magnetic storage since the properties derived from nanometer-scalematerials are not present in either isolated molecules or micrometer-scalesolids. This study presents the experimental results derived fromthe various functional materials processed in nano-scale using pulsed laserablation, since those materials exhibit new physical phenomena caused by thereduction dimensionality. This presentation consists of three mainparts to consider in pulsed laser ablation (PLA) technique; first nanocrystallinefilms, second, nanocolloidal particles in liquid, and third, nanocoating fororganic/inorganic hybridization. Firstly, nanocrystalline films weresynthesized by pulsed laser deposition at various Ar gas pressures withoutsubstrate heating and/or post annealing treatments. From the controlof processng parameters, nanocystalline films of complex oxides and non-oxidematerials have been successfully fabricated. The excellentcapability of pulsed laser ablation for reactive deposition and its ability totransfer the original stoichiometry of the bulk target to the deposited filmsmakes it suitable for the fabrication of various functionalmaterials. Then, pulsed laser ablation in liquid has attracted muchattention as a new technique to prepare nanocolloidal particles. Inthis work, we represent a novel synthetic approach to directly producehighly-dispersed fluorescent colloidal nanoparticles using the PLA from ceramicbulk target in liquid phase without any surfactant. Furthermore, novel methodbased on simultaneous motion tracking of several individual nanoparticles isproposed for the convenient determination of nanoparticle sizedistributions. Finally, we report that the GaAs nanocrystals issynthesized successfully on the surface of PMMA (polymethylmethacrylate)microspheres by modified PLD technique using a particle fluidizationunit. The characteristics of the laser deposited GaAs nanocrytalswere then investigated. It should be noted that this is the first successfultrial to apply the PLD process nanocrystals on spherical polymermatrices. The present process is found to be a promising method fororganic/inorganic hybridization.
본 연구에서는 자성일성분용 흑색 토너의 자성체인 마그네타이트의 새로운 제조방법에 대해 연구를 하였다. 기존의 습식법과는 달리 건식법이라 할 수 있는 분무배소법을 이용하여 마그네타이트를 제조하였다. 이때 제조조건을 달리하며 제조된 마그네타이트분말의 특성을 수입제인 TMB 125와 비교하였다. 질소 분위기하에서 염화제일철과 염화제이철 수용액의 혼합비를 7:3~3:7까지 변화시켜 가면서 제조했을 때 100% 마그네타이트 상을 관찰 할 수 있었고, 염화제일철의 농도가 그보다 크면 FeO의양이 많아지고, 염화제이철의 농도가 크면 $\Gamma-Fe_2O_3$의 양이 많아졌다. 두 염화철의 혼합비가 5:5일때, 분무배소법에 의해 제조된 마그네타이트의 보자력은 110~130Oe, 포화자화는 80~85emu/gdldlT다. 입자의 형태는 불규칙한 구형에 가깝고 입자의 평균크기는 $0.3~0.5\mu\textrm{m}$로 토너용 자성재료로서 매우 적합한 특성을 나타냈다.
본 논문은 실용적인 면을 고려한 휴대전화 단말기용 전파 흡수체 개발을 위해 연구하였다. 이에 Sendust 배합율, $Al(OH)_3$ 코팅 함유량, 시편의 두께, 지지재의 변화가 전파 흡수체의 전파 흡수능에 치는 영향을 연구하였다. 중심 주파수는 전파 흡수체의 두께가 1 mm, 2 mm, 3 mm로 증가할수록 2.2 GHz, 1.29 GHz, 842 MHz의 저주파대로 이동하였고, Sendust의 배합율이 80 wt%에서 85 wt%로 증가되면서 2.2 GHz에서 1.91 GHz로, 1.29 GHz에서 801 MHz로, 842 MHz에서 801 MHz로 각각 저주파대로 조절할 수 있었다. 전파 흡수 대역은 Sendust에 $Al(OH)_3$를 코팅했을 때가 코팅하지 않았을 때보다 흡수 대역이 넓어졌다. 이때 전파 흡수체는 지지재는 CPE로 하였으며, 제작 온도는 $70^{\circ}C$로 일정하게 하였다. 제작된 전파 흡수체는 두께가 0.85 mm일 때 1.8 GHz에서 5.76 dB의 우수한 전파 흡수능을 보였다.
La doped CuO-ZnO-$Al_2O_3$ powders are prepared by sol-gel method with aluminum isopropoxide and primary distilled water as precursor and solvent. In this synthesized process, the obtained metal oxides caused the precursor such as copper (II) nitrate hydrate and zinc (II) nitrate hexahydrate were added. To improve the surface areas of La doped CuO-ZnO-$Al_2O_3$ powder, sorbitan (z)-mono-9-octadecenoate (Span 80) was added. The synthesized powder was calcined at various temperatures. The dopant was found to affect the surface area and particle size of the mixed oxide, in conjunction with the calcined temperature. The structural analysis and textual properties of the synthesized powder were measured with an X-ray Diffractometer (XRD), a Field-Emission Scanning Electron Microscope (FE-SEM), Bruner-Emmett-Teller surface analysis (BET), Thermogravimetry-Differential Thermal analysis (TG/DTA), $^{27}Al$ solid state Nuclear Magnetic Resonance (NMR) and transform infrared microspectroscopy (FT-IR). An increase of surface area with Span 80 was observed on La doped CuO-ZnO-$Al_2O_3$ powders from $25m^2$/g to $41m^2$/g.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.