• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.859-864
• /
• 1998

Compact and small size, reliable and failsafe operation and low cost featuring fault current limiter causing the designer to take a close look into the use of passive fault current limiter(FCL) for the protection of power semiconductor devices in power electronic systems. This paper has identified the main parameters responsible for the development of ideal passive magnetic current limiter. The effect of those parameters on the range of operation and the voltage-current characteristics of the magnetic current limiter has been studied using tableau approach. Desirable characteristics are discussed and the simulation results are presented.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.89.2-89.2
• /
• 2011

The geometry of an MC (magnetic cloud) in the interplanetary space can be estimated by the magnetic flux rope model. But the single point observation in the interplanetary space near the Earth is scanty to comprehend the global configuration of MC because the MC is considered a huge loop extending from the Sun with both legs rooted on the Sun. If the MC is observed at two different locations sufficiently far away from each other, it may provide the global configuration of the MC. In this study, we model the MC which is observed two different locations using a simple straight cylinder model. The MC model fit parameters are the flux rope axis orientation (${\Theta}$, ${\phi}$), the intensity of the magnetic field at the flux rope axis ($B_0$), the radius of the MC ($R_0$), and the impact parameter (p), etc. With the MC model fit parameters we look into the difference between two observed MC geometries and also calculate the magnetic flux and helicity of the MC.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.96-98
• /
• 2001

In this paper, the equivalent magnetic circuit and FEM are used to calculate force density of linear BLDC motor. The equivalent magnetic circuit is hard to exact compose for analysis model and it is just applied to linear system. To flexible design and reducing the calculated and analyzed time, magnetic circuit has to be used for designing the linear BLDC motor and deducing equation of force density. Force density as parameter of permanent magnet and coil-side width that are important to determined force density can be estimated using equation of force density. FEM is used to prove reliability of equation of force density and to consider the nonlinear system. Equivalent magnetic circuit and result of FEM are similar, but it is little different by friction loss at the experiment.

• Journal of Magnetics
• /
• v.22 no.2
• /
• pp.333-343
• /
• 2017

A rotating magnetic field (RMF) ${\Phi}_1-{\Phi}_2$ model was developed in consideration of the skin effect. The rotating magnetic field's induced three-dimensional flow was simulated numerically, and the influence of the skin effect was investigated. The rotating magnetic field drives the rotating convection in the azimuthal direction, and a secondary convection appears in the radial-meridional direction. The results indicate that ignoring the skin effect results in a smaller azimuthal velocity component and larger radial and axial velocity components, and that the deviation becomes more obvious with the larger dimensionless shielding parameter K.

• Geomechanics and Engineering
• /
• v.37 no.3
• /
• pp.243-251
• /
• 2024

In the current work, a poro-thermoelastic half-space issue with temperature-dependent characteristics and an inclined load is examined in the framework of the three-phase-lag model (3PHL) while taking into account the effects of magnetic and gravity fields. The resulting coupled governing equations are non-dimensional and are solved by normal mode analysis. To investigate the impacts of the gravitational field, magnetic field, inclined load, and an empirical material constant, numerical findings are graphically displayed. MATLAB software is used for numerical calculations. Graphs are used to visualize and analyze the computational findings. It is found that the physical quantities are affected by the magnetic field, gravity field, the nonlocal parameter, the inclined load, and the empirical material constant.

• Journal of the Korean Magnetic Resonance Society
• /
• v.21 no.1
• /
• pp.26-30
• /
• 2017

Dynamic properties of proteins can present key information on protein-ligand and protein-protein interaction. Despite their usefulness, the properties of protein dynamics have not been obtained easily due to protein stability and short-term measurement. Here, it is shown that combined method for analysis of dynamical properties. It utilizes predicted order parameter and NMR relaxation data such as $T_1$, $T_2$, and heteronuclear NOE. The suggested method could be used to know the flexibility of protein roughly without precise dynamical parameters such as order parameters through model-free analysis.

• Journal of Magnetics
• /
• v.17 no.2
• /
• pp.100-108
• /
• 2012

Flux concentrated permanent magnet transverse flux machines, FCPM-TFMs, with segmented stators require multi-turn concentric saddle coils to replace the ring coils, which are normally utilized in conventional layeredphase TFM constructions. In this paper, we investigate the influence of the shape of saddle phase windings and their parameter variations on the output torque productivity. Non-meshed coils evaluated via a finite element method (FEM) to examine the effect of the coil's location within one phase on machine performance. By using meshed coils, the analysis can be extended to inspect the distributions of magnetic field strength as well as current density in the coils. Throughout the study, the influence of design parameters on the output torque for two stator structures, i.e., a laminated and soft magnetic composite (SMC), are evaluated.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.893-894
• /
• 2006

This paper presents a design and analysis solutions for the general class and control parameter estimation of slotted iron-cored Permanent Magnet Linear Synchronous Motor with Halbach magnetization stator and 3-phase winding mover. In our design and analysis, stator consisting of permanent magnets and slotted iron-cored coil mover are treated in a uniform way via magnetic vector potential. For one such motor structure, we give analytical formulas for its magnetic field, back electromotive force and trust force. Moreover, the detent force are calculated by the relative permeance function. In good agreement with the estimated values from the analyses, the experimental results and Finite Element Method (FEM) confirm the validity of the design and analysis framework.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.11
• /
• pp.617-624
• /
• 1999

The spiral type thin-film inductor performed in high frequency at 2-5[MHz] range is analyzed by 2-dimensional Finite Element Method(2D FEM). The features of micro thin-film inductor have complicated electromagnetic phenomenon such as skin effect, proximity effect and magnetic saturation. To develope miniatured magnetic device considering these features, it is important to predict the property of the thin film inductor according to design parameter. In this paper, we present the 2D FEM analysis for the spiral type thin film inductor. The characteristics of inductor from point of view of inductance, resistance and quality factor are studied according to design parameter and various pattern construction.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.8
• /
• pp.417-425
• /
• 1999

This paper presents an effective control scheme with the voltage-fed half-bridge series resonant inverter for induction heating system, which is based upon a load-adaptive tuned frequency tracking control strategy using PLL(Phase Locked Loop) and its peripheral control circuits. The proposed control strategy ensures a stable operation characteristics of overall inverter system and ZVS(Zero Voltage Switching) irrespective of sensitive load parameter variations, specially in the non-magnetic materials as well as power regulation. The detail operation principle and the characteristics of inverter system with the proposed control scheme are described and its validity is verified by the simulation and the experimental results for a prototype induction cooking system rated at 1.2kW.