• 한국분말재료학회지
• /
• 제20권6호
• /
• pp.474-478
• /
• 2013

The most general photocatalyst, $TiO_2$ and $WO_3$, are acknowledged to be ineffective in range of visible light. Therefore, many efforts have been directed at improving their activity such as: band-gap narrowing with non-metal element doping and making composites with high specific surface area to effectively separate electrons and holes. In this paper, the method was introduced to prepare a photo-active catalyst to visible irradiation by making a mixture with $TiO_2$ and $WO_3$. In the $TiO_2-WO_3$ composite, $WO_3$ absorbs visible light creating excited electrons and holes while some of the excited electrons move to $TiO_2$ and the holes remain in $WO_3$. This charge separation reduces electron-hole recombination resulting in an enhancement of photocatalytic activity. Added Ag plays the role of electron acceptor, retarding the recombination rate of excited electrons and holes. In making a mixture of $TiO_2-WO_3$ composite, the mixing route affects the photocatalytic activity. The planetary ball-mill method is more effective than magnetic stirring route, owing to a more effective dispersion of aggregated powders. The volume ratio of $TiO_2(4)$ and $WO_3(6)$ shows the most effective photocatalytic activity in the range of visible light in the view point of effective separation of electrons and holes.

• 한국전기전자재료학회논문지
• /
• 제37권3호
• /
• pp.274-279
• /
• 2024

Eu³⁺-doped BaZrO₃ (BaZrO₃:Eu³⁺) phosphor powders were prepared using a solid-state reaction by changing the molar concentration of Eu³⁺ within the range of 0.5 to 30 mol%. Irrespective of the molar concentration of Eu³⁺ ions, the crystal structures of all the phosphors were cubic. The excitation spectra of BaZrO₃:Eu³⁺ phosphors consisted of an intense broad band centered at 277 nm in the range of 230~320 nm. The emission spectra were composed of a dominant orange band at 595 nm arising from the ⁵D₀→⁷F₁ magnetic dipole transition of Eu³⁺ and two weak emission bands centered at 574 and 615 nm, respectively. As the concentration of Eu³⁺ increased from 0.5 to 10 mol%, the intensities of all the emission bands gradually increased, approached maxima at 10 mol% of Eu³⁺ ions, and then showed a decreasing tendency with further increase in the Eu³⁺ ions due to the concentration quenching. The critical distance between neighboring Eu³⁺ ions for concentration quenching was calculated to be 11.21 Å, indicating that dipole-dipole interaction was the main mechanism of concentration quenching of BaZrO₃:Eu³⁺ phosphors. The results suggest that the orange emission intensity can be modulated by doping the appropriate concentration of Eu³⁺ ions.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.68-73
• /
• 2007

We fabricated the in-situ $MgB_2$ wires using the powder-in-tube method and investigated the effects of sintering temperature and SiC contents on the microstructure and superconducting properties. Pure $MgB_2$ wires and 5, 10, 20 wt.% SiC doped $MgB_2$ wires were sintered at $600-1000^{\circ}C$ for 30 minutes in Ar atmosphere. We found that $MgB_2$ phase was mostly formed at the sintering temperature of $700^{\circ}C$ and above, and the critical temperature ($T_c$) increased with increasing sintering temperature. For the $MgB_2$ sintered at $850^{\circ}C$, the highest critical current density ($J_c$) was obtained to be $3.7{\times}10^5\;A/cm^2$ at 5 K and 1.6 T by a magnetic properties measurement system (MPMS). The addition of SiC to the $MgB_2$ wires changed microstructure and critical properties. SEM observation showed that the $MgB_2$ core had considerable micro-cracks in undoped wire and the density of micro-cracks decreased with increasing SiC contents. The critical temperature decreased as the SiC contents increased, on the other hand, the critical current density of SiC doped $MgB_2$ wires in high magnetic field was enhanced compared to that of undoped $MgB_2$ wires.

• 한국분말재료학회지
• /
• 제15권3호
• /
• pp.182-187
• /
• 2008

Carbon was known to be one of effective additives which can improve the flux pinning of $MgB_2$ at high magnetic fields. In this study, glycerin $(C_3H_8O_3)$ was selected as a chemical carbon source for the improvement of critical current density of $MgB_2$. In order to replace some of boron atoms by carbon atoms, the boron powder was heat-treated with liquid glycerin. The glycerin-treated boron powder was mixed with an appropriate amount of magnesium powder to $MgB_2$ composition and the powder pallets were heat treated at $650^{\circ}C\;and\;900^{\circ}C$ for 30 min in a flowing argon gas. It was found that the superconducting transition temperature $(T_c)$ of $Mg(B_{1-x}C_x)_2$ prepared using glycerin-treated boron powder was 36.6 K, which is slightly smaller than $T_c$(37.1 K) of undoped $MgB_2$. The critical current density $(J_c)$ of $Mg(B_{1-x}C_x)_2$ was higher than that of undoped $MgB_2$ and the $T_c$ improvement effect was more remarkable at higher magnetic fields. The $T_c$, decrease and $J_c$ increase associated with the glycerin treatment for boron powder was explained in terms of the carbon substitution to boron site.

• 한국자기학회지
• /
• 제16권1호
• /
• pp.18-22
• /
• 2006

바나듐(V)도핑이 $Fe_3O_4$의 자기적 성질에 미치는 영향을 조사하기 위하여 졸-겔 방법을 이용하여 $V_xFe_{3-x}O_4$ 박막들을 제작하고, x-ray diffraction(XRD), x-ray photoelectron spectroscopy(XPS), conversion electron Mossbauer spectroscopy(CEMS), vibrating sample magnetometry(VSM) 등을 이용하여 그 구조적, 자기적 특성들을 측정 및 분석하였다. XRD 측정 결과에 따르면 $V_xFe_{3-x}O_4$ x=1.0까지 입방(cubic)구조를 유지하며, 그 격자 상수는 거의 변화하지 않았다. 바나듐의 2p 및 철의 2p 준위들에 대한 XPS 측정 및 분석 결과, 바나듐은 화합물 내에서 주로 +3가의 상태로 존재하며, 성분비 x가 증가함에 따라 +2가 이온의 농도가 증가함이 나타났다. CEMS측정 결과 $V^{3+}$이온들은 사면체 $Fe^{3+}$자리를 주로 치환하며, $Fe^{2+}$이온들은 팔면체 $Fe^{2+}$자리를 치환하는 것으로 나타났다. 박막들에 대한 상온에서의 VSM측정 결과, 바나듐을 작은 양 도핑 할 경우(x=0.14) $V_xFe_{3-x}O_4$의 포화자화량(saturation magnetization)은 $Fe_3O_4$ 비하여 증가함이 나타났으며, 다량 도핑 할 경우$(x\geq0.5) Fe_3O_4$에 비하여 점차적으로 감소함이 나타났다. $V_xFe_{3-x}O_4$의 보자력(coercivity)은 x의 증가에 따라 증가함이 나타났는데, $V^{2+}(d^3)$ 이온의 팔면체 자리 치환에 의한 비등방성의 증가에 기인하는 것으로 해석된다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2011년도 임시총회 및 하계학술연구발표회
• /
• pp.7-8
• /
• 2011

Basically, the lattice mismatch between film and substrate can make those BiFeO3(BFO) films distorted with strain structure. BFO phase can be stabilized on LaAlO3(LAO) represents the example of a multiferroic with giant axial ratio. Its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion and related to the rotation of the oxygen octahedra. In this study, we show that phases with a tetragonal-like epitaxial BFO films can indeed be ferroelectric and also can be stabilized via epitaxial growth onto LAO. Recent reports on epitaxial BFO films show that the crystal structure changes from nearly rhombohedral ("R-like") to nearly tetragonal("T-like") at strains exceeding approximately -4.5%, with the "T-like" structure being characterized by a highly enhanced c/a ratio. While both the "R-like" and the "T-like" phases are monoclinic, our detailed x-ray diffraction results reveal asymmetry change from MA and MC type, respectively. By applying additional strain or by modifying the unit cell volume of the film by substituting Ba for Bi, the monoclinic distortion in the "T-like" MC phase is reduced, i.e. the system approaches a true tetragonal symmetry. There are two different M-H loops for $Bi_{1-x}Ba_xFeO_{3-{\delta}}$(BBFO) and BFO films on SrTiO3(STO) & LAO substrates. Along with the ferroelectric characterization, these magnetic data indicate that the BFO phase stabilized on LAO represents the first example of a multiferroic with giant axial ratio. However, there is a significant difference between this phase and other predicted ferroelectrics with a giant axial ratio: its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion. Therefore, in going from bulk to highly-strained films, a phase sequence of rhombohedral(R)-to-monoclinic ["R-like" MA-to-monoclinic, "T-like" MC-to-tetragonal (T)] is observed. This sequence is otherwise seen only near morphotropic phase boundaries in lead-based solid-solution perovskites (i.e. near a compositionally induced phase instability), where it can be controlled by electric field, temperature, or composition. Our results show that this evolution can occur in a lead-free, stoichiometric material and can be induced by stress alone. Those major results are summarized as follows ; 1) Ba-doping increases the unit cell volume, 2) BBFO on LAO can be fully strained up to x=0.08 as a strain limit (Fig. 1), 3) P(E) & M(H) properties can be tuned by the variation of composition, strain, and film thickness.