• Progress in Superconductivity and Cryogenics
• /
• v.14 no.4
• /
• pp.41-45
• /
• 2012

An HTS (high temperature superconducting) coil without insulation has been investigated since a metallic insulation was suggested in the mid-1980s. The advantage of an insulationless HTS pancake coil is that it is more stable than an insulated HTS pancake coil. This paper focuses on the various characteristics of the insulationless HTS pancake coil related with stability, especially under the external magnetic field. Because HTS pancake coil may be influenced by the external magnetic field in a real operational environment of electrical devices. First, charge-discharge test was performed for the characteristics evaluation of the insulationless HTS pancake coil as compared with insulated HTS pancake coil in liquid nitrogen at 77 K. Based on the experiment results, characteristics evaluation of the insulationless HTS pancake coil was implemented under the external magnetic field. In order to carry out the experiment, we have fabricated a cylindrical solenoid coil to apply the magnetic field. The various characteristics of the insulationless HTS pancake coil were evaluated for charge-discharge and over-current conditions. This paper proves that the insulationless HTS pancake coil is more stable than the insulated HTS pancake under the external magnetic field.

• Proceedings of the Korean Magnetic Resonance Society Conference
• /
• 1999.02a
• /
• pp.31-32
• /
• 1999

• Journal of the Korean Magnetics Society
• /
• v.21 no.5
• /
• pp.174-179
• /
• 2011

Magnetic force calculation methods such as Maxwell stress, virtual work principle, equivalent magnetic charge, and equivalent magnetizing current are widely used until now. The force density is still controversial issue even though it is common sense that all of these methods have legitimate results. The surface force densities of each method are quite different with each other in the point of numerical result and final expression. In this paper, it is shown that a unified expression of body force density is derived using virtual air-gap scheme for an analytic model in which cylindrical magnetic material with a vertical current runs through its center.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.96.2-96.2
• /
• 2011

We analyzed transient Ca II brightening associated with small-scale canceling magnetic features in the quiet Sun near disk center using Ca II H and NaD1 filter images of the SOT/Hinode. We found that in most Ca II brightening related to CMFs the Ca II intensity peaks after magnetic flux cancellation proceeds. Moreover, brightening tend to appear as pairs of bright points of similar size and similar brightness overlying magnetic bipoles. These results imply that magnetic reconnection taking place in the chromosphere or above may be in charge of CMFs.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.3
• /
• pp.289-294
• /
• 2012

In this paper, the three-dimensional magnetic field created by non-periodic magnet arrays is calculated analytically. The analytical expression of the magnetic field is derived by using a magnetic charge model. The influence of ferromagnetic boundaries is formulated with an image method. Finally, we compare the results determined by analytical calculations to those from a finite element simulation.

• Journal of the Korean Magnetic Resonance Society
• /
• v.9 no.1
• /
• pp.67-73
• /
• 2005

$^{27}AI$ triple quantum magic angle spinning (3QMAS) NMR spectra of several mordenite (MOR) sample were simulated with the point charge model method and compared with experimental 3QMAS spectra. Signal positions from different tetrahedral (T) sites in 3QMAS spectra are mainly governed by local structures of T sites such as T-O-T angles and T-O bond lengths. When preparation methods, cations in addition to Si/Al rations vary, the local structures of T sites in MOR change enough to alter signal patterns in 3QMAS of MOR. This inhibits to study the of Al distribution variation over 4 different T sites in mordenite during process such as dealumination by 3QMAS spectra.

• Journal of Magnetics
• /
• v.8 no.2
• /
• pp.85-88
• /
• 2003

The magnetic and transport properties far single crystals of Ru-doped mono-layered manganites $La_{0.5}Sr_{1.5}-Mn_{1-x}Ru_xO_4$ (0$\leq$$\chi$$\leq$0.1) have been studied using neutron diffraction and magnetization measurements. Temperature dependent magnetization data reveal that with an increase in the Ru concentration the parent charge ordered antiferromagnetic state is gradually destroyed and new ferromagnetic phase evolves. In the low Ru-doped system spin glass behavior is apparent in low temperature region, which is confirmed by ac and do magnetization measurements. The competing magnetic interaction between Mn/Mn and Mn/Ru couples is the most likely cause of the spin glass transition.

• Journal of the Korean Magnetic Resonance Society
• /
• v.22 no.4
• /
• pp.101-106
• /
• 2018

Magnetite is the oldest magnet material known to mankind. It is getting attention again from solid state physics researchers now a days because it is one of the most strongly correlated electron systems. Spin, charge, and orbital orders are interplaying with lattice and involved in the Verwey transition where magnetization, conductivity, and structure changes suddenly. The peculiar ordering states above and below the transition temperature mainly originate from the coexistence of $Fe^{2+}$ and $Fe^{3+}$ ions in the B site of the inverse spinel structure. In particular, the state of the charge and orbital order was the oldest and most intriguing problem. NMR has made significant contribution to the investigation of this question. A. Abragam stated that there is no doubt that NMR is a very powerful tool for the study of ferromagnetic and antiferromagnetic materials. In this mini-review, a short history of NMR investigation of magnetite is presented, providing a support to Abragam's claim.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.6
• /
• pp.465-468
• /
• 1994

The charge transfer compounds $(TTF)_4FeCl_3{\cdot}CH_3OH,\;(TTF)_4SbCl_4\;and\;(TTF)_5(SbBr_4)_2{\cdot}CH_3COCH_3$ were prepared from reactions of the TTF (tetrathiafulvalene) and metal halides. The compounds were characterized by spectroscopic (UV,IR, EPR and XPS) methods, magnetic susceptibility and electrical conductivity measurements. The d.c electrical conductivities of the pressed pellets are in the order of $10^{-1}-10^{-3} Scm^{-1}$, which lies in the range of semiconductor region at room temperature. It means that the partially ionized TTF has stacked in low-dimensional chain in each compound. Spectroscopic properties also indicate that TTF molecules are partially ionized and charge transfer has occurred from (TTF)n to Fe(III) center in $(TTF)_4FeCl_3{\cdot}CH_3OH$ whereas to the $-SbX_4^-$ entity in $(TTF)_4SbCl_4\;and\;(TTF)_5(SbBr_4)_2{\cdot}CH_3COCH_3$. The EPR g values are consistent with TTF radical formation and EPR linewidths suggest the delocalization of unpaired electrons along TTF stacks. A signal arised from metal (Fe and Sb) ions were not detected in EPR spectra, indicating that metal ion is in the diamagnetic state in each compound. The diamagnetic state was also examined by the magnetic susceptibility measurement. The magnetic properties reveal the significant interaction between the $TTF^+$ radical cations in the stacks. The oxidation state of metal ions was also investigated by XPS spectra.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.2
• /
• pp.57-61
• /
• 2002

In this study, the effect of ammonium chloride on the electrodeposition of CoP magnetic alloy film was investigated. The correlation between the electrodeposition condition and the magnetic properties was tried to elucidate by the electro- analytical tests such as cyclic voltammetry. It was observed that the magnetic properties of the films were varied extensively with the ammonium chloride contents in the solution. The reason why the magnetic properties of the films were varied with the addition of ammonium chloride was thought that the addition of ammonium chloride controlled the electrocrystallization of CoP kinetically by charge transfer and increased the grain size and the orientation factor. This may cause the variation of the magnetic properties of CoP films.