• Journal of Mechanical Science and Technology
• /
• v.17 no.11
• /
• pp.1616-1627
• /
• 2003

This paper describes a mini linear optical pickup actuator. To reduce the size, inner yokes are designed to guide the mover and outer yokes of permanent magnets are removed. Magnetic circuit method is used to determine the thrust force. Virtual path method is proposed to analyze the open magnetic circuit analysis. The magnetic circuit of the proposed actuator can be a closed circuit due to the virtual path model of the outer magnetic flux. The validity of virtual path method is evaluated by comparing to the FEM analysis. Structural vibration is investigated using FEM and the design of the mover is modified to improve the vibration characteristic. Dynamic characteristic experiments shows that the performance of the proposed actuator is enough to be used as a coarse and fine seeking actuator simultaneously and the thrust force margin for loading a focusing actuator is guaranteed.

• Journal of Power Electronics
• /
• v.13 no.4
• /
• pp.552-557
• /
• 2013

This paper proposed an analytical model for the distributed magnetic field analysis of interior permanent magnet-type blush-less direct current motors under the stator-turn fault condition using the winding function theory. Stator-turn faults cause significant changes in electric and magnetic characteristic. Therefore, many studies on stator-turn faults have been performed by simulation of the finite element method because of its non-linear characteristic. However, this is difficult to apply to on-line fault detection systems because the processing time of the finite element method is very long. Fault-tolerant control systems require diagnostic methods that have simple processing systems and can produce accurate information. Thus analytical modeling of a stator-turn fault has been performed using the winding function theory, and the distributed magnetic characteristics have been analyzed under the fault condition. The proposed analytical model was verified using the finite element method.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.12
• /
• pp.789-796
• /
• 2000

This paper deals with magnetic field and characteristic analysis for ring type slotless synchronous motors by using analytical method. Since magnetic air-gap in the slotless motors is much larger than mechanical air-gap, it is necessary to analyze the magnetic flux distribution at the whole magnetic airgap region. therefore, this paper analyzes the duplicated magnetic field derived by both Permanent Magnet(PM) and armature current and estimates the back electromotive force and torque characteristic by subdividing the conductor region. The analysis results are verified by comparing with Finite Element Analysis(FEA) results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.419-422
• /
• 1999

We prepared CoCr thin film for perpendicular magnetic recording media by facing targets sputtering system(FTS system) which can deposit a high quality thin films in plasma-free state and wide range of working pressure. In this study, we investigated that the effect of sputtering condition , that Argon gas pressure and substrate temperature, on magnetic and crystallographic characteristic of CoCr thin film as well as the variation perpendicular coercivity in changing of film's thickness. Crystallographic and magnetic characteristic of prepared thin films were evaluated by x-ray fractometry(XRD), vibrating sample magnetometer(VSM) and kerr hysteresis loop measurement.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1309-1311
• /
• 2005

The operating speed of PWM controlled high speed magnet is affected by mass of plunger magnetic motive force inductance and return spring It is impossible to change the value of them for the purpose of increasing the speed because these factors are related with each other This paper introduces a speed increasing method using a non magnetic ring which is welded in the middle of magnetic guide tube and also presents the characteristic equations results of FEM analysis for magnetic flux distribution and computer simulation results for the dynamic characteristics of plunger motion And we proved the effect of non magnetic ring by experiments using a prototype

• Journal of Institute of Convergence Technology
• /
• v.10 no.1
• /
• pp.25-29
• /
• 2020

Magnetic gears of non-contact power type have great advantages in terms of maintenance and repair than mechanical gears, and are used in various ways. Harmonic gears can derive a higher gear ratio than conventional gears through power transmission through a unique rotation mechanism. Magnetic harmonic gears, in which the gear teeth of the harmonic gears are replaced with magnets, have the advantages of both gears, but are difficult to implement and practical, so many studies are being conducted. In this study, we check whether the results of various types of magnetic gears can be applied to harmonic gears. By applying the axial type magnetic gear to the harmonic gear, the characteristic analysis is conducted to see if the result comparable to the existing radial type magnetic harmonic gear is obtained.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1085-1092
• /
• 2010

This paper describes the development of estimating equation for under 16 aged children's exposure to habitat's magnetic field for 24 hours by using particle swarm optimization(PSO) algorithm, which was carried out by using the measured database collected from the exposure survey to Korean habitat's magnetic field as to under 16 aged Korean students such as preschooler, children in elementary school, and children in middle school. Sex, age, residence type, size of habitation site, distance from power line, and power transmission voltage are used as the input data of estimating 24 hour's personal exposure to magnetic field. And distribution of 24 hour's personal exposure to magnetic field, exposure characteristic to magnetic field, and exposure characteristic to magnetic field according to special conditions, are analyzed for under 16 aged children.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.5
• /
• pp.1958-1968
• /
• 2015

In this paper, a new definition of short-circuit ratio concept for multi-converter HVDC systems is proposed. Analysis results of voltage interaction between converters show that the reactive power-voltage characteristic of a converter has a dominant effect on voltage interaction level compared with its active power-voltage characteristic. Such a relation between converter reactive power and voltage interaction level supports taking the former into account in the definition of short-circuit ratio concept for multi-converter systems. The proposed definition is verified by the method of maximum power curve for various system configurations. Furthermore, a formula to calculate transient overvoltage for multi-converter systems is derived based on the proposed definition, and the efficiency of the derived formula is verified.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.697-698
• /
• 2008

This paper deals with finite element characteristic analysis of brushless DC motor according to magnetic property measurement methods. Magnetic property data for non-oriented (NO) electrical steel for electric motors are measured by the Epstein test which is considered as the international standards. Data from Epstein test may result in discrepancy from motor characteristic tests due to innate anisotropic property of NO electrical steel. Finite element analysis were performed for a BLDC motor by various measurement methods such as Epstein test, Ring test and single sheet test (SST), and calculated results were compared with considering anisotropic property conditions.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.794-795
• /
• 2015

This paper deals with back-EMF characteristic comparison of Vertical and Halbach array double-sided linear generator with coreless type. On the basis of a magnetic vector potential and Maxwell's equations, governing equations are obtained, and magnetic modeling is predicting characteristic analysis by using the Fourier series expansion. And then, we obtained magnetic field solutions and calculated resistance, back-EMF constant. The analytical results used by 2-D cylindrical coordinate system. The analytical method used in this paper is confirmed by comparing with finite element analysis results.