• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2008년도 High Temperature Superconductivity Vol.XVIII
• /
• pp.59-59
• /
• 2008

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2006년도 High Temperature Superconductivity Vol.XVI
• /
• pp.12-12
• /
• 2006

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2007년도 High Temperature Superconductivity Vol.XVII
• /
• pp.8-8
• /
• 2007

• Progress in Superconductivity
• /
• 제14권2호
• /
• pp.87-91
• /
• 2012

Metallic magnetic calorimeters (MMCs) are one of the most competitive low temperature detector (LTD) readout sensors. They have the advantages of high time resolution, no heat dissipation, and a wide range of operating temperature. We apply MMCs to our neutrinoless double beta decay ($0v{\beta}{\beta}$) search experiment. A $CaMoO_4$ crystal was employed as both a source of $0v{\beta}{\beta}$ and an energy absorber. The crystal was thermally connected to a MMC sensor. We set a simple thermal model for this detector and measured pulse shapes are compared with a numerical solution of the thermal model.

• 한국안전학회지
• /
• 제30권4호
• /
• pp.8-13
• /
• 2015

The magnetic shape memory alloys have recently received a lot of attention due to the considerable progress achieved in understanding the particular importance and the development of the factors. Among these alloys, the ferromagnetic Co-Ni- alloys have been concerned specially because of the thermoelastic character of the fcc (g) - bct (a) martensitic transformation which exhibits under the action of the temperature (shape memory effect), the stress (superelasticity) and the magnetic field (magnetoelasticity). The morphological, the crystallographical, and the thermal characteristics of thermally induced martensite in Co-35.3Ni-11.3Al(wt.%) and Co-28.1Ni-47.4Fe-3.3Ti (wt.%) alloy have been investigated by the scanning electron microscope (SEM), the X-ray Diffraction (XRD), and the differential scanning calorimeter (DSC).

• Bulletin of the Korean Chemical Society
• /
• 제22권4호
• /
• pp.367-371
• /
• 2001

Lithium inserted into artificial carbon has been synthesized as a function of the Li concentration. The characteristics of these prepared compounds were determined from the studies using X-ray diffraction(XRD), solid nuclear magnetic resonance (NM R) spectrophotometric and differential scanning calorimeter(DSC) analysis. X-ray diffraction showed that lower stage intercalation compounds were formed with increasing Li concentration. In the case of the AG3, most compounds formed were of the stage 1 structure. Pure stage 1 structural defects of artificial graphite were not observed. 7Li-NMR data showed that bands are shifted toward higher frequencies with increasing lithium concentration; this is because non-occupied electron shells of Li increased in charge carrier density. Line widths of the Li inserted carbon compounds decreased slowly because of nonhomogeneous local magnetic order and the random electron spin direction for located Li between graphene layers. The enthalpy and entropy changes of the compounds can be obtained from the differential scanning calorimetric analysis results. From these results, it was found that exothermic and endothermic reactions of lithium inserted into artificial carbon are related to the thermal stability of lithium between artificial carbon graphene layers.

• Progress in Superconductivity
• /
• 제12권1호
• /
• pp.41-45
• /
• 2010

Low temperature micro-calorimeters have been employed in the field of high resolution alpha spectrometers. These alpha detectors typically consist of a superconducting or metal absorber and a temperature sensor. The temperature sensor can be a transition edge sensor (TES), a metallic magnetic calorimeter (MMC) or other low temperature detectors for an accurate measurement of temperature change due to an alpha particle absorption. We report a recent study of the heat flow between a replaceable absorber and a temperature sensor. A piece of gold foil in $2.4{\times}2.7{\times}0.03\;mm^3$ is used as an absorber. A $40\;{\mu}m$ diameter Au:Er paramagnetic sensor is attached to another small piece of gold foil in $400{\times}200{\times}30\;{\mu}m^3$ to serve as the temperature sensor. This sensor assembly, Au:Er and gold foil, is placed on a miniature SQUID susceptometer in a gradiometric configuration. The thermal connection between the absorber and the sensor was made with three gold bonding wires. The measured thermal conductance shows a linear dependence to the temperature. The values are in a good agreement with Wiedemann-Franz type thermal conductance of the gold wires.

• Elastomers and Composites
• /
• 제42권3호
• /
• pp.151-158
• /
• 2007

최근 들어 전기적, 기계적 성질이 우수한 다중벽탄소나노튜브(Multi-Walled Carbon Nanotubes)/고분자 복합재료에 대한 연구가 활발히 진행 중이다. 본 연구에서는 모듈라 치합형 동방형 회전 이축 압출기(Modular Intermeshing Co-Rotating Twin Screw Extruder, L/D=42)를 이용하여 PMMA/MWNT 복합체를 제조하였다. 이렇게 제조된 PMMA/MWNT 복합체의 표면저항을 측정한 결과 MWNT의 함량이 4 wt% 일 때 $10^4{\Omega}/sq$를 나타내어 전자파차폐(Electronic Magnetic Interference) 물질로 응용할 수 있는 가능성을 확인하였다. 그리고 열중량 분석기 (Thermogravimetric Analysis), 시차주사열량계(Differential Scanning Calorimeter)를 이용한 열적특성, 주사전자현미경(Scanning Electron Microscopy)을 통하여 형태학적 변화를 분석하였다. 또한 유변학적 특성을 알아보기 위해 용융흐름지수(Melt Flow Index)를 측정하였다.

• Journal of Radiation Protection and Research
• /
• 제38권3호
• /
• pp.132-137
• /
• 2013

기존에 많이 사용된 반도체 검출기의 분해능은 통계학적 이론으로 그 분해능의 한계가 따른다. 이러한 이유로 최근에 반도체 검출기가 갖는 에너지 분해능의 한계를 뛰어넘는 저온 검출기를 이용하여 다양한 방사성 핵종 분석을 시도하고 있다. 본 논문에서는 $2{\times}2{\times}0.05mm^3$ 크기 금막 흡수체에 입사하는 에너지 때문에 흡수체의 온도가 상승하는 원리를 이용해 $^{241}Am$ 알파 선원의 에너지를 측정하였다. 흡수체의 온도 변화 측정에는 자기양자센서인 Au:Er를 이용하였으며 이는 순수한 Au에 핵스핀이 0 인 $^{168}Er$을 수백 ppm을 첨가하여 얻은 상자성 합금이다. 알파 입자 흡수에 의한 미세한 온도증가를 측정하기 위해서 희석식 냉동기보다 작동이 편리한 무냉매 자기냉동기를 이용해 mK 온도 영역의 저온환경을 구성하였다. $^{241}Am$ 선원 측정 결과 5.5 MeV에서 6.8 keV의 FWHM의 에너지 고 분해능을 얻었다.

• 한국분말재료학회지
• /
• 제9권5호
• /
• pp.359-364
• /
• 2002

We report the structure, thermal and magnetic properties of a non-equilibrium $Al_{0.6}(Fe_{50}Cu_{50})_{0.4}$ alloy powder produced by rod milling and chemical leaching. An X-ray diffractometry(XRD), a transmission electron microscope(TEM), a differential scanning calorimeter(DSC), a vibrating sample magnetometer(VSM), and superconducting quantum interference device(SQUID) were utilized to characterize the as-milled and leaching specimens. The crystallite size reached a value of about 8.82 nm. In the DSC experiment, the peak temperatures and crystallization temperatures decreased with increasing milling time. The activation energy of crystallization is 200.5 kJ/mole for as-milled alloy powder. The intensities of the XRD peaks of as-milled powders associated with the bcc type $Al_{0.5}Fe_{0.5}$ structure formative at $350^{\circ}C$ sharply increase with increasing annealing temperature. Above $400^{\circ}C$, peaks alloted to $Al_{0.5}Fe_{0.5}$ and $Al_{5}Fe_{2}$ are observed. After annealing at $600^{\circ}C$ for 1h, the leached Ll specimen transformed into bcc $\alpha$-Fe and fcc Cu phases, accompanied by a change in the structural and magnetic properties. The saturation magnetization decreased with increasing milling time, and a value of about 8.42 emu/g was reached at 500 h of milling. The coercivity reached a maximum value of about 142.7 Oe after 500 h of milling. The magnetization of leached specimens as function of fields were higher at 5 K, and increased more sharply at 5 K than at 100 K.