• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.317-324
• /
• 2015

A super speed maglev is a complicated system integrating electric, electronic, mechanic, civil and construction engineering. So, there must be an integrative system to monitor and manage operation requirements and standard features of each subsystem and the interfaces between each technology. As an indispensable part that can ensure whole system performance, a secure interface for each individual subsystem is an important management item of system engineering. By securing the interface performance of each individual subsystem, system failure can be effectively prevented in advance. Based on system engineering techniques, improvement of security and reliability for a super speed maglev is described in this research.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8187-8194
• /
• 2015

To accelerate a heavy roller coaster train with over 1G force, a lot of thrust is required and linear synchronous motor(LSM) as propulsion method is suitable for this kind of system. To increase the propulsion efficiency of LSM, precise and real-time position information of vehicle is required for accurate phase control. However, the discontinuous position information with relatively long time interval is usually transmitted from the hall-sensors on the track every magnet length. In this paper, the basic motor model based on traditional dq-axis equations is described and the motor dynamic model is produced by considering the cogging force and friction loss. To improve the position accuracy, the position estimator is also proposed for LSM control system. Simulations were performed to check the characteristics of the torque control system which includes the position estimator based on the motor model. Simulation results based on the linearized model show that this control system has an enough bandwidth and phase margin and the executed algorithm achieves an ideal effect to follow the real-time position signal. Therefore, the feasibility of position estimator is also confirmed.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.1076-1080
• /
• 2009

An analysis of Life Cycle Cost (LCC) is to evaluate the system through the total cost accounting during the total life cycle. Railway system has problem that abundant capital has to be utilized efficiently because railway system is a combined system such as power supply, machines, electric signals. Especially, Magnetic Levitation Train needs high technique and more study about the Life Cycle cost by using the system being developed currently in Korea. Therefore, the Modeling of Life Cycle Cost for Magnetic Levitation Train is proposed considering the tendency of the studies in other countries.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1669-1679
• /
• 2010

Related to the on-going "Train Control System Project of Pilot Line Construction for Urban MAGLEV Train", activities by each phase shall be conducted to achieve SIL4 level and obtain safety certification from the Independent Safety Assessment(ISA), based on the IEC standards((IEC 62278/62279 and IEC 62425) for the first time in Korea. This thesis describes the introduction of IEC standards, system assurance activities (such as plan, analysis, test, verification and validation) in compliance with requirements management and project life-cycle and relations with the safety assessment activities; and certification activities (such as document reviews and audits) through system RAMS activities, software quality assurance activities and safety assessment, for the purpose of achieving a successful safety certification at the time of completing the project as system assurance activities including software and safety certification activities in order to acquire the safety certification for train control system which does not exist at all in domestic cases. It is believed that overall system safety assurance activities in this project will contribute to develop more upgraded products of the domestic train control system on the quality and safety point of view, find overseas markets and establish a bridgehead in the future.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1191-1198
• /
• 2011

The railway business was began at England in 1767. Since then, it has been changed for configuration of rail over the years and made in the form of I. The train propulsion has been developed in a engine of steam, diesel, motor, electromagnetic force and a pneumatic engine, continuously. also, the friction has been improved in a steel-wheel, rubber tire, frictionless maglev system and railless system. In consequence, the efficiency and improvement speed for train have been accomplished. In this paper, it is investigated for the structure with lightweight using the change for supporting the form of lateral pressure by centrifugal force in the substructure supporting load for railway vehicles.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1118-1125
• /
• 2010

This paper presents the methods to acquire the Safety Certificate from Independent Safety Assessment based on the IEC standard62279 which is commonly applied to railway system for Automatic Train Control(ATC) system in accordance with Urban Maglev project. This also shows approach methods and relative activities for project life-cycle to accomplish and ensure the system requirements of ATC system, RAMS and S/W quality activities. Furthermore, the key tasks conducted with ISA are noted in detail. These kind of activities for software quality of ATC system to obtain Safety Certificate could be a CASE model to improve the quality of domestic railway system and products, and also contribute to the growth of railway business and toward the achievement of overseas' railway signaling markets.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1676-1682
• /
• 2008

The vertical curve of railway is installed in changing point where the gradient is more than a certain degree to ensure safe operation of train and comfort of passengers. As a result of CAD work with 3D coordination by using the existing equation, it was found that the simple equation about vertical curve installation suggested in the surveying engineering or railway regulations did not reflect theoretical curvature of circular curve in a case of steep grade and large vertical radius. In this study, for derive precision equation and transition curve about vertical curve, gradient parameters, equation of circles and transition curve equation were used, and it was verified by CAD that the derived equation is exactly satisfied with parameters of geometrical circular and transition curve. This equation could be used to provide more smoothing operation of train and comfort of passengers on vertical curves, especially in case that railway requires precision vertical alignment of track such as super high-speed railway, LRT or Maglev system.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.183-185
• /
• 2009

자기부상열차는 자기력에 의해 차량이 부상되어 전용선로를 따라 비접촉으로 운행되는 철도운송시스템이다. 자기부상열차에서는 열차가 운영 선로위에 부상되어 비접촉으로 운행되기 때문에 일반 철도시스템에서 적용되고 있는 측위기술의 적용이 어렵다. 따라서 자기부상열차에는 다양한 측위기술들이 개발되어 적용 되고 있다. 본 논문에서는 자기부상열차에 적용중인 다양한 측위기술 및 측위장치에 대하여 검토하고, 독자적인 초고속자기부상열차 개발시 필요한 열차위치검지기술의 개발방향을 제시한다.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3180-3186
• /
• 2011

A segmented scissors type switch has been developed for the urban transit maglev demonstration line to be commercialized near Incheon International Airport in 2013. Based on the design of the previous segmented 3-way switch, the scissors switch is composed of four segmented 2-way switches up/down and left/right and a turn table in the mid point. The main function of the scissors switch is to change the running direction of the train at end terminals. The developed scissors switch is planned to be installed in front of the 102 station, which has a side platform, of the demonstration line. The total length of the switch is 65m and the distance between the up and down track centerlines is 6m. The 2-way switches and turn table are made of steel box type beams, and have their own driving unit, locking unit, control unit, levitation and propulsion rails, and so on. Installed in the factory, a 100,000-cycle continuous operation test was carried out after manual and automatic test operations. The applicapability of the developed switch was verified through the measurements of the linearity of the track after repetitive operations, the mechanical operation noise, the load of the main driving motor, the safety of the control panel, the natural frequency of the girder, the deformation of the girder, and so on.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1189-1194
• /
• 2011

The Maglev train is operated by levitating from a power of a large number of magnets and moving without direct contact to railway track so that reduces noise and vibration due to mechanical friction. Also, the Maglev passes sharp curves and steep hill without any difficulties. The Maglev has a potential to be an alternative transport system urban areas. For successful commercializing of Maglev, the organization of interface for safety and reliability of third rail system are one of the key considerations. Especially, the components of the third rail system, such as power rail, expansion joints, FRP section insulator, and supporter with epoxy insulator, should be durable, convenient for construction, and easy to maintenance. This paper analyzes the characteristics of the third rail system components and proposes organization of interface for system engineering. The operating tests of KIMM for the proposed third rail system verify the safety. Also, this paper analyzes the life cycle of the system components to improve the system reliability and evaluation.