• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.508-511
• /
• 2002

With increasing the needs for micro and precision parts, micro machining technology using micro tools has been studied to fabricate a small part with high density such as electronics, optics, communications, and medicine industry more than before. Though these micro tools have developed rapidly, it is difficult to apply them to micro fabrication technologies, because of the inherent manufacturing. In this study, micro tools(wc) to produce micro structures and parts were manufactured by cylindrical grinding machine employing ELID(Electrolytic In-process Dressing) technique and good dimensional accuracy was achieved. Furthermore we researched the characteristics of machining on the micro drilling using micro drills and manufactured micro tools. Finally it is confirmed that manufactured micro tools can be used for micro machining.

• Journal of the Korean Ceramic Society
• /
• v.30 no.5
• /
• pp.420-426
• /
• 1993

The machinability of ceramics has been experimentally studied. The experiments were conducted on alumina cernmics of various purity, quartz, and cordierite using the sintered diamond tools and CBN tools. Tool wasre, surface roughness, and cutting resistence were measured and analysed. It was found that the workpieces could be machined with the diamond and CBN tools, but the sintered diamond tools were more efficient for the machining of the high strength ceramics. The machining of alumina ceramics with sintered diamond tools showed that (1) wet machining prolonged tool life comparing with dry machining, (2) workpiecewith higher purity had better surface roughness, (3) severe cutting conditions led to the chipping and fracture of tool and increase of the surface roughness and cutting resistance, (4) 20~40m/min of cutting speed, 0.01~0.02mm/rev of feed, and 0.1~0.2mm of cutting depth are suggested as proper cutting conditions for the high strength ceramics.

• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.3
• /
• pp.62-68
• /
• 2004

Effectiveness of a corrective machining algorithm, which can construct the proper machining information to improve motion errors utilizing measured motion errors, is verified experimentally in this paper, Corrective machining process is practically applied to single and double side hydrostatic bearing tables. Lapping process is applied as a machining method. The machining information is obtained from the measured motion errors by applying the algorithm, without any information on the rail profile. In the case of the single-side table, after 3 times of corrective remachining, linear and angular motion errors are improved up to 0.13 $\mu\textrm{m}$ and 1.40 arcsec from initial error of 1.04 $\mu\textrm{m}$ and 22.71 arcsec, respectively. In the case of the double-side table, linear and angular motion error are improved up to 0.07 /$\mu\textrm{m}$ and 1.42 arcsec from the initial error of 0.32 $\mu\textrm{m}$ and 4.14 arcsec. The practical machining process is performed by an unskilled person after he received a preliminary training in machining. Experimental results show that the corrective machining algorithm is very effective and easy to use to improve the accuracy of hydrostatic tables.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1285-1288
• /
• 2005

Screw rotors, the key parts of screw compressors, are used in compressing air and refrigerant due to their high productivity, compact size, low noise and maintenance. In general, a screw compressor is composed of a pair of rotors of complex geometric shape. The manufacturing cost of the screw rotors is high because the complicated helical shapes of the screw rotors are manufactured usually by the dedicated machine tools. In this study, rotor profile is divided into three parts for the efficient machining. The formed tools are designed and shared for the respective split region. By cutting the screw rotor using the formed tools, this method is more efficient than the end mill in machining rotor. Experimental results show that 4-axis machining using formed tools needs less time and has the accuracy.

• International Journal of Precision Engineering and Manufacturing
• /
• v.1 no.1
• /
• pp.111-117
• /
• 2000

One of the major limitations of productivity and quality in metal cutting is the machining accuracy of machine tools. The machining accuracy is affected by geometric errors, thermally-induced errors, and the deterioration of the machine tools. Geometric and thermal errors of machine tools should be measured and compensated to manufacture high quality products. In metal cutting, the machining accuracy is more affected by thermal errors than by geometric errors. This paper models the thermal errors for error analysis and develops an on-the-machine measurement system by which the volumetric errors are measured and compensated. The thermal error is modeled by means of angularity errors of a column and thermal drift error of the spindle unit which are measured by the touch probe unit with a star type styluses and a designed spherical ball artifact (SBA). Experiments show that the developed system provides a high measuring accuracy, with repeatability of $\pm$2$\mu\textrm{m}$ in X, Y and Z directions. It is believed that the developed measurement system can be also applied to the machine tools with CNC controller. In addition, machining accuracy and product quality can be also improved by using the developed measurement system when the spherical ball artifact is mounted on a modular fixture.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.915-918
• /
• 1997

An internal finishing process by the application of magnetic abrasive machining has been developed as a new technology to obtain a fine inner surface of pipe. In this paper, an abrasive circulation system was designed and manufactured. As a result, it was found that a fine inner surface abrasive of pipe was available by the use of this machining methods. The basic machining characteristics of pin-type magnetic tools were analyzed experimentally. In addition, the experimental results show that we can realize that pin-type magnetic tools have more machining efficiency than iron particles as magnetic tools.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.1
• /
• pp.51-65
• /
• 1995

This paper presents an automatic fixture planning system for machining processes of prismatic parts. A rationalized approach to integrate fixture planning with process planning is proposed and representation schemes for workpiece, part design information with features, machine tools, cutting tools and fixtures are developed. The proposed system implements two activities of fixture planning such as machining of reference surfaces and machining of features. For machining of reference surfaces, the machining sequence of reference surfaces is determined by using decision tables, which are drawn from relations of part dimension, degree of surface roughness, fixture type and its capacity, cutting tool's capacity and experienced planners' knowledge. For machining of features, a preferential machining orientation is selected for its feature which can be machined in more than one direction, and features with the same machining orientation are grouped, and the machining sequence of features is determined by interactive mode. A case study is performed to show the performance of the proposed system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.917-921
• /
• 2000

One of the major limitations of productivity and quality in machining is machining accuracy of the machine tools. The machining accuracy is affected by geometric, volumetric errors of the machine tools. This paper suggests the enhancement method of machining accuracy for precision machining of high quality metal reflection mirror or optics lens, etc. In this paper, we study 1) the compensation of linear pitch error with NC controller compensation function using laser interferometer measurement, 2) the method for enhancing the accuracy of NC milling machining by modeling and compensation of volumetric error, 3) the generation of the parabolic face profile. And the method is verified by the parabolic face machining experiment with a vertical three axes NC milling machine. After this study, we will inspect using On-machine measurement and study the repetitive machining by a compensated path

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.3
• /
• pp.66-74
• /
• 1990

This paper presents a knowledge-based computer aided process planning system that automatically selects machine tools, machining operations and cutting tools and determines sequences of the machining operations for prismatic parts in die manufacturing. In the proposed system, parts are described by manufacturing features and grouped into part families based on the functions. Each part is repressented by a part frame which consists of basic data and manufacturing features. Knowledge for manufacturing is acquired from the domain expert and represented by frames. A decision model for selection of machine tools, machining operations and cutting tools and for determining sequences of the machining operations are developed by employing the Mealy machine in finite automata with output. The decision procedure and the order of priority which inputs manufacturing features into the Mealy machine are represented by rule for each part family. Backward chaining is used for the proposed system. The proposed system is implemented by using TURBO-PROLOG on the IBM PC/AT. A case study for the slide core is presented to show the function of the proposed system.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.171-178
• /
• 2002

With increasing the needs for micro and precision parts, micro machining technology using micro tools has been studied to fabricate a small part with high density such as electronics, optics, communications, and medicine industry more than before. Though these micro tools have developed rapidly, it is difficult to apply them to micro fabrication technologies, because of the inherent manufacturing. In this study, micro tools (WC) to produce micro structures and parts were manufactured by cylindrical grinding machine employing ELID (Electrolytic In-process Dressing) technique and the micro tools are fabricated as square shape with the dimension less than 100${\mu}{\textrm}{m}$. With the micro tools on the same machine, characteristics of micro grooving and drilling are evaluated. Also we compare normal micro machining with ultrasonic micro machining on the vibration table. It is confirmed that the developed micro tools are fully applicable to micro grooving, micro drilling and free form cutting.