• 현장농수산연구지
• /
• 제3권1호
• /
• pp.142-157
• /
• 2001

This study was conducted to get the basic information for promoting farm machinery productivity by surveying the regular maintenance and repair status of major farm machinery such as power tiller, farm tractor, rice transplanter and combine harvester. The survey was carried out through 9 provinces including Cheju province by direct visiting farmers with prepared questionnaire. The results of this study can be summarized as follows : 1. The average farming carrier of the surveyed farmers was 25.3 years, and 21-30 years of farming carrier showed the highest portion as 40.7%. The average carrier of using farm machinery was 9.4 years, and that was 14.9 years for power tiller, 8.3 years for farm tractor, 9.0 years for rice transplanter, 7.9 years for combine harvester, 7.5 years for mini tiller, 9.7 years for power sprayer, and 8.2 years for binder etc. 2. The regular maintenance for farm machinery was conducted mainly at repair shop (49.5%) or dealer agency (12.0%) as 61.5%, and 34.9% of farmers conducted the regular maintenance by themselves at their house. 3. The reasons for not-fully recognizing operation manual and insufficient before-, during-, after-maintenance of farm machinery were insufficient time for them (45.8%), troublesome (22.9%), unknown maintenance method (16.3%), unknown the necessity for maintenance (12.4%), and others (2.6%) in order. 4. For the annual exchange of engine oil, 3.2 times is necessary but actually 1.7 times was exchanged for power tiller, 4.3 times is necessary but actually 1.9 times was exchanged for farm tractor, 2.7 times is necessary but actually 1.7 times was exchanged for rice transplanter, 2.2 times is necessary but actually 2.3 times was exchanged combine harvester. 5. For the annual cleanness or exchange of fuel filter, 3.2 times is necessary but actually 1.1 times was done for power tiller, 4.3 times is necessary but actually 1.6 times was done for farm tractor, 2.7 times is necessary but actually 1.7 times was done for rice transplanter, 1.9 times is necessary but actually 0.8 times was done for combine harvester. 6. For the annual cleanness or exchange of air filter, 3.2 times is necessary but actually 1.4 times was done for power tiller, 4.2 times is necessary but actually 2.4 times was done for farm tractor, 2.6 times is necessary but actually 1.6 times was done for rice transplanter, 3.9 times is necessary but actually 7.0 times was done for combine harvester. 7. For the experience of breakdown related to maintenance, 5.3% of farmers experienced breakdown due to the insufficient exchange of engine oil, 7.7% of farmers experienced breakdown due to the insufficient cleanness or exchange of fuel filter, and 2.9% of farmers experienced breakdown due to the insufficient cleanness or exchange of air filter. 8. Most farmers (76.1%) recognized the necessity for agricultural machinery training or education, and most farmers preferred about one week for the training period, simple or ease maintenance for the training level, agricultural technical center or agricultural machinery manufacturer for the training agency. 9. Complete recognition of operation manual and sufficient before-, during-, and after-maintenance for farm machinery can minimize the breakdown as well as conduct suitable period farming, enlarge the endurance, prevent the safety accidents, and promote productivity of farm machinery. Therefore, these can be accomplished by the thorough training or education for agricultural machinery.

• Journal of Biosystems Engineering
• /
• 제11권1호
• /
• pp.31-36
• /
• 1986

As a part of study on automatic control system for green houses, an automatic irrigation system was developed by using microcomputer. For the study, gypsum block was used as a sensing device of soil moisture and its data was designed to transfer to microcomputer through A/D converter. Also, software which be able to control the irrigation time and flow rate by the solenoid valve was developed. This system was tested by using practical data and the following results were summarized. 1. Since the gypsum was very accurate in addition with chiep and easy to manufacture, it turned out to be a very good device to detect the soil moisture in this system. 2. Also, solenoid valve was very excellent device for controlling the water flow rate since its control error is less then 1% when the irrigation time is over 100 seconds.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.491-496
• /
• 2005

A pump design system was constructed by several integrating in-house programs and commercial softwares to design and evaluate centrifugal pumps. An agent-based prototype framework has been developed for collaborative design and optimization of a centrifugal pump. This paper introduces the feasible technology needed to construct a pump design system based on software agents. The integrated design system, developed in the present study, was used in designing a centrifugal pump and modifying its impeller shape by using optimization processes to increase the pump performance.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.179-180
• /
• 2018

This study aims to provide a more comfortable environment for the external environment by designing a rotable dwelling that deviates from the conventional fixed residential concept. The round pillars, which are the center of the building, are constructed by placing the CFT (concrete Filled steel Tube) technique in place and assembling modular houses with columns. This study combines existing building techniques. Korea also needs to develop various related studies quickly.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.251-256
• /
• 2003

The detailed flow characteristics inside a compression chamber due to the orbiting motion of a scroll is studied numerically. The orbiting motion of a scroll is modelled at 7 orbiting angles. At each orbit angle, the central compression chamber is modelled. All computations are carried by using an in-house code. It is based on the SIMPLE algorithm. Computation results show that the flow structure inside the compression chamber is dependent on the orbit angle. The pressure variation inside the compression chamber also shows great dependence on the orbit angle. The pressure variation shows local maxima when the orbiting motion of a scroll directs toward the center of the compression chamber.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2013년도 특별논문집
• /
• pp.30-34
• /
• 2013

Prevention of exhaust gas back flow becomes a great interest to shipyards and shipowners in large container carriers because exhaust gas pollutes cargoes, flows back into the deck house and the engine room area through fresh air intakes and fan rooms, gives harmful damages to the crew's health and also gives thermal damages to electric equipments on the navigation deck. The phenomena of exhaust gas back flow has been studied with the analysis of sea trial records and wind tunnel tests and the height of the exhaust gas pipe, the front area of the deck house, the inflow speed and the position of the radar mast platform has been confirmed as the principal factors of exhaust gas back flow phenomena. The simple empirical formula to estimate exhaust gas back flow phenomena and the design guidances of exhaust gas related structures on deck has been introduced. In future, parametric studies for the exhaust gas back flow factors will be carried out with the CFD analysis. The results of this study will be the guide for development of the prevention method of exhaust gas back flow phenomena for large container carriers.

• 한국건축시공학회지
• /
• 제21권4호
• /
• pp.333-345
• /
• 2021

공동주택 입주자들의 생활 수준 향상 및 고품질 기대로 인해 공동주택 하자와 관련된 민원이 매년 증가하고 있다. 그리고 이와 동시에 하자발생 유형 또한 새롭게 변화하고 있다. 이러한 유형 변화를 확인하기 위해 전국 12개 단지 100개 동(9,748 세대)을 대상으로 조사하였다. 세대 당 하자 접수 건은 하자 종류의 변화 없이 10년 전보다 대략 1.6배 증가하였다. 기계설비 하자 접수 건의 경우는 10년 전보다 1.4배 증가하였지만 하자 종류의 변화가 발견되었다. 그중 일반 부분(급수, 배수, 수압 등)이 차지하는 비율이 10년 전보다 25% 가량 감소하였다. 이는 실내 환경과 관련된 아이템들이 대부분의 신규 공동주택에 필수적으로 적용되어 이와 관련된 하자 종류가 늘어난 까닭이다. 공동주택에 새롭게 적용되는 특화 아이템들이 점차 확대되는 추세로 향후 이와 관련된 하자는 점차 증가할 것으로 예상된다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.121-121
• /
• 2017

오늘날 시장에 유통되는 버섯은 대부분 환경이 조절되는 시설 내부에서 재배된다. 버섯은 다른 식물과 달리 버섯의 종류, 품종 등에 따라 요구되는 환경이 매우 다르다. 특히 대부분의 버섯은 버섯이 생육되는 공간의 온도, 수분, 이산화탄소, 조도 등의 관리가 필수적이다. 버섯의 단위면적당 생산량을 극대화하기 위해서는 이들 버섯이 필요로 하는 환경을 버섯의 생육특성에 따라 적합하게 유지해 주어야만 한다. 현재 대부분의 버섯재배사에는 이들 환경을 컨트롤하는 장치가 설치되어 있고, 이들 시스템의 환경 설정은 농업인이 현장에서 버섯의 상태를 확인 한 후 그때그때 경험에 의해 채득한 정보를 기반으로 환경설정을 하고 있는 실정이다. 이렇다 보니 버섯을 재배하는 기간에는 농업인이 재배사 내부의 환경을 관리하기 위해서 항상 버섯재배사에 머물러야 하고, 재배사의 환경관리 때문에 원거리 또는 장기 출타가 어려운 실정이다. 본 연구에서는 기존에 사람이 버섯재배 현장에서 컨트롤하던 환경관리를 원격에서 컴퓨터 또는 모바일로 구현할 수 있는 시스템을 개발하였다. 시스템에서 모니터링 및 제어하는 환경은 온도, 습도, 이산화탄소, 배기팬 및 입기팬의 가동 등 버섯재배 환경관리에 필요한 모든 요소를 모니터링 및 관리할 수 있도록 하였다. 이들 관리 요소는 인터넷이 연결된 컴퓨터에 접속하여 버섯재배사의 환경을 실시간으로 모니터링 하고 필요에 따라 제어를 할 수 있도록 하였다. 또한 컴퓨터에서 볼 수 있는 환경을 스마트폰을 통해서도 볼 수 있고 또한 제어할 수 있도록 하였다. 그리고 버섯배지를 입상 한 후부터 수확시기까지의 관리 환경을 데이터베이스로 만들어 농민이 버섯배지를 입상하고 데이터베이스와 연동한 제어가 되도록 설정하면 버섯재배사 내부의 환경은 데이터베이스의 정보를 읽어 들여 버섯의 생육단계에 따라 자동으로 내부환경이 제어되도록 하였다. 또한 농업인이 원격에서 버섯재배사 내부 버섯의 생육상황을 모니터링 할 수 있도록 재배사 상부에 CCD 카메라를 달아 실시간으로 버섯의 생육상활을 모니터링 할 수 있도록 구성하였다. 이와 같은 시스템을 사용하면 버섯재배 경험이 없는 농업인도 경험자와 같은 재배관리가 가능하고 원격에서 재배사 내부환경을 모니터링하고 제어 할 수 있기 때문에 농업인이 재배사에 매여 있지않아도 될 것으로 판단된다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.613-622
• /
• 2000

Watering operation for oyster mushroom growing houses is regarded as drudgery and time consuming farm operation for growers. Most of mushroom growing beds in oyster mushroom growing houses are designed as two-row with four floor beds, therefore the watering and ventilation between the bed floors are much difficult for farmers because of its structural design. The study aimed to reduce the watering operation and improve the mushroom growing environment through the humidification and air supply on mushroom growing beds. Results showed that appropriate size of nozzle is between 0.8~0.5ml/s for the humidification and higher than the 2.0ml/s for the watering. The optimum water supply pressure was regarded as between 1.0~2.0MPa and the uniform distribution of droplet on the bed showed on air flow speed of 14m/s. The prototype was equipped with twin nozzle with. the humidification nozzle of 0.85ml/s and watering nozzle of 5.0ml/s, and the air blast fan with the air speed of 10m/sec in each air spout. In the field test in a practical scale mushroom growing house, it was well operated dependant on the set desire by a electric control unit. The machine can be practically used as air blast watering and air blast humidification for oyster mushroom growing farms without manual.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권6호
• /
• pp.620-625
• /
• 2015

IMO MEPC에서는 지구온난화를 늦추기 위해서, 선박에서 배출되는 GHG(Green House Gas)인 $CO_2$를 줄이기 위한 방안으로 선속을 다운시켜 운항할 것을 제안한바 있으며, 해운회사에서도 연료비 절감을 위해서 자발적으로 감속운항(Low steaming)을 하고 있어, 국제항해에 종사하고 있는 대부분의 컨테이너선들이 감속운항을 하고 있다. 또한, 날로 증가되고 있는 해운 물동량 증가로 선박의 연료비 부담이 증가되고 있어 연료비 절감 기술개발이 절실히 요구되고 있다. 따라서 본 연구에서는 디젤엔진의 성능을 향상시킬 수 있는 연료첨가제(유용성 칼슘계 유기금속화합물)를 일정량 투입(사용 연료량의 0.025%) 하여 연료비를 절감하는 방법을 시도하였다. 실험의 정확도를 위해서 육상 발전소에 설치된 2행정 대형 디젤엔진을 실험 대상으로 하였다. 실험 엔진의 부하는 저, 중 및 고 부하(50, 75, 100%)로 나누어서 실시하였으며, 연료첨가제의 투입 전과 투입 후의 엔진성능(출력, 연료소비율, 최고연소압력(P-max), 배기온도)을 비교 분석 하였다. 본 실험을 통해서 연료첨가제를 투입함으로써 저부하(50%) 에서 2% 이상의 연료비 절감 효과를 확인 할 수 있었으며, 최고연소압력은 상승하는 반면에 배기온도는 하강함을 알 수 있었다.