• Journal of the Korean Operations Research and Management Science Society
• /
• v.30 no.3
• /
• pp.41-54
• /
• 2005

In this paper, we consider a multi-objective machine cell formation problem. This problem Is characterized as determining part route families and machine cells such that total sum of inter-ceil part movements and maximum machine workload imbalance are simultaneously minimized. Together with the objective function, alternative part routes and the machine sequences of part routes are considered In grouping Part route families. Due to the complexity of the problem, a two-phase heuristic algorithm is proposed. And we developed an n-stage look-ahead heuristic algorithm that generalizes the roll-out algorithm. Computational experiments were conducted to verify the performance of the algorithm.

• Journal of the Korea Furniture Society
• /
• v.12 no.1
• /
• pp.91-101
• /
• 2001

This study explored the trend of postwar period American furniture design and analyzes the contexts of the trend. To be more specific, this study categorized the types of the styles or "looks" of furniture which were dominant in postwar period America: the machine look ; the handicraft look ; the biomorphic look. The background and the context for each look were traced back and analyzed both diachronically and synchronically. Based on the analysis, this study provided two conclusions. First, postwar period American furniture design is in many ways indebted to the World War II, because the war itself and postwar economic revival produced high demands for furniture, which consequently produced a variety of looks of furniture. Second, the furniture design in this period is attributed to commercialism and consumer-oriented design policy formulated in the mid 1920′s when American design established its own identity separating from European avant-gardism.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.4
• /
• pp.30-37
• /
• 2015

This research aims to develop Look Ahead position interpolation algorithm for small size CNC machine controlled by PC based controller. Look Ahead scheme can process a bundle of CNC's linear interpolation commands simultaneously, which reduces acceleration and deceleration time within single linear interpolation command. The algorithm is derived as simple analytical form which can be adapted to PC based CNC system by C language programming. The performance of the algorithm was verified by tail stock machining G codes experimentally. The average traverse speed of the CNC machine was increased by 27.5% and the total traverse time also reduced by 27.2% with the Look Ahead scheme.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.11
• /
• pp.167-173
• /
• 2002

The look up table method conventionally applied to control the inner temperature and humidity of a laver drying machine has repeatedly occurred not only laver's damage but also inferior goods since the reaching time at the optimum state takes a long time. In this paper, a fuzzy control theory instead of the look up table was proposed to reduce the reaching time at the optimum state. The proposed method used six input variables and four output variables for the fuzzy control, and a triangle rule for a fuzzifier, The Mandani's min-max method was applied to a fuzzy inference. Also, the mean method of maximum was applied to a defuzzifier. The method applied to the fuzzy controller contributed to reduce the reaching time at the optimum state, and to minimize not only laver's damage but also inferior goods.

• Journal of Computing Science and Engineering
• /
• v.6 no.2
• /
• pp.119-126
• /
• 2012

Machine-to-machine communications for healthcare is emerging for the benefit of humans. In addition to novel medium access, we provide a systematic view to look for ways to develop technology to accomplish this goal, and a thorough vision toward effective system and network design.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.252-257
• /
• 2000

This paper describes a look-ahead algorithm of PCNC(personal computer numerical control). The algorithm is based on acceleration/deceleration before interpolation never including a command error and determines a velocity value in end point of each block(or start point of each block). The algorithm is represented as following; 1) calculating two maximum arrival velocity(v1, v2) by a acceleration value, a command velocity and distance in a previous block and a next block, 2) getting a tangent velocity(v3) of the adjacent blocks, 3) choosing a minimum value among these three velocities, and 4) setting the value to a velocity of a start point of the next block(or a end point of the previous block). The proposed look-ahead algorithm was implemented and tested by using a commercial RTOS(real time operation system) on the MS-Windows NT 4.0 in a PC platform. For interfacing to a machine, a counter board, a DAC board and a DIO board were used. The result of the algorithm increased a machining precision and a machining speed in many short blocks.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.457-458
• /
• 2006

A method for obtaining smooth, jerk bounded feed rate profile in high speed machining has been developed. This study proposes a NURBS interpolator based on adaptive feed rate control with a well developed look ahead algorithm which takes into account the machining dynamics as well. Limitation of jerk and proportional torque rate result in smoothened loads on the machine which effectively reduces excitation of the resonant frequencies of the machine. It is found that the values of the feed rate of the down stream sharp corner have profound effect on the feed rate of the upstream sharp corners. By using a windowing scheme the feed rate profile obtained after look ahead method is re-interpolated to reduce the jerk related problems. This is compared with the adaptive NURBS interpolator to show the effectiveness of the proposed method. Simulation results indicate that the consideration of 'ripple effect' is important in avoiding jerk and thereby increasing the machining accuracy.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.10a
• /
• pp.566-569
• /
• 2004

본 연구에서는 생산능력의 제한이 있는 다계층(multi-echelon) 공급사슬에서의 효과적인 분배계획수립을 목적으로 한다. 수요 정보는 계획 기간(planning horizon) 동안 확정적인 형태로 주어지고 이러한 상황 하에서 전체 공급사슬에서 발생하는 재고유지 비용(holding cost)과 재고이월 비용(backorder cost)의 합을 최소화하는 분배 문제의 해법을 제시하고자 한다. 본 연구에서는 총비용을 최소화하는 각 노드별 분배량을 결정하기 위해서 look-ahead 기법을 사용한다. Look-ahead 기법을 통해 분배 계획 수립 시 해당 기간의 수요 정보뿐만 아니라 미래 수요를 함께 반영함으로써 생산능력 제한에 효과적으로 대처할 수 있도록 하였다. Look-ahead 기법을 적용하기 위해 본 문제를 단일 기계 일정계획(single machine scheduling) 문제로 전환하고 이에 대한 효율적인 발견적 기법을 제시한다. 또한 제안된 발견적 기법의 성능을 평가하기 위해 다양한 실험 조건하에서 제안된 알고리듬과 기존의 미래 수요를 고려하지 않는 계층 재고 정책(echelon stock policy)의 결과를 비교하여 본 연구의 우수성을 입증하였다.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.19 no.2
• /
• pp.153-176
• /
• 1994

In this paper we introduce machine learning theory to business domains for business decisions. First, we review machine learning in general. We give a new look on a previous framework, version space approach, and we introduce PAC (probably approximately correct) learning paradigm which has been developed recently. We illustrate major results of PAC learning with business examples. And then, we give a theoretical analysis is decision tree induction algorithms by the frame work of PAC learning. Finally, we will discuss implications of learning theory toi business domains.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.06a
• /
• pp.61-70
• /
• 2000

This paper described the current status of machine tool technology and its future trends with a particular emphasis on high-speed machining. People in machine tool industry have continuously sought to serve fast-changing manufacturing industry with economical machining solutins. At presents, it appears that more productivity gain is demanded to shorten time-to-market and machining requirements become more stringent. In this regard, this paper firstly addressed a high-speed spindle as a key element for the next-generation machine tools. The sequel to it apparently went to high-speed feed axes and final discussion included the problem of how to optimize overall system including servo function. Lastly a brief look to NC technology including machine intelligence was taken.