• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.609-621
• /
• 1997

The purpose of this study was to evaluate the shear bond strength of three light-cured glass ionomer cements to blood contaminated bovine dentin. The materials used in this study were Fuji II LC, Dyract and Variglass VLC. The dentin conditioners were 10% polyacrylic acid, 10% maleic acid and 10% phosphoric acid. 180 lower anterior bovine teeth were selected in this study. The teeth were embedded in acrylic resin and were grounded with 320 to 600 grit silicon carbide paper to create a flat dentin surface. The teeth were divided into SIX groups. The experimental procedures in six groups were as follows; Group l(GF) : Samples bonded to dentin surface with Fuji II LC after 10% polyacrylic acid treatment. Group 2(BGF) : Samples bonded to dentin surface with Fuji II LC after 10% polyacrylic acid treatment and blood contamination. Group 3(MD) : Samples bonded to dentin surface with Dyract after 10% maleic acid treatment. Group 4(BMD) : Samples bonded to dentin surface with Dyract after 10% maleic acid treatment and blood contamination. Group 5(PV) : Samples bonded to dentin surface with Variglass VLC after 10% phosphoric acid treatment. Group 6(BPV) : Samples bonded-to dentin surface with Variglass VLC after 10% phosphoric acid treatment and blood contamination. Group 1,3 and 5 were classified into the control groups, while group 2,4 and 6 were classified into the experimental groups. Each group contained 30 samples. After 24 hours water storage at $37^{\circ}C$, all smples were subjected to a shear load to fracture at a cross head speed of 1.0 mm/min with Instron universal testing machine(No. 4467). Debonded surfaces were observed under Scanning Electron Microscope(Hitachi S-2300) at 20kvp. The data were evaluated statistically at the 95% confidence level with Student's t-test. The following results obtained; 1. Shear bond strengths were higher in the control groups(1,3,5 group) than in the experimental groups(2,4,6 group). 2. The shear bond strength of group 5(PV) was the highest in the control groups, and the group 5 was significantly higher than the group l(GF) on the shear bond strength. 3. The group 4(BMD) was the highest on the shear bond strength, and the group 2(BGF) was the lowest in the experimental groups. The group 4(BMD) and 6(BPV) showed a significant difference with the group 2 on the shear bond strength. 4. All the groups showed an adhesive-cohesive failure. except the group 2(BGF) showing adhesive failure.

• PNF and Movement
• /
• v.5 no.2
• /
• pp.73-88
• /
• 2007

Purpose : The purpose of this study was to find out The effect of Low back pain on the total pattens of Proprioceptive neuromuscular facilitation(PNF). Methods : The subjects of the study were 62 low back pain patients. They were divided into two groups: 31 in the experimental group and 31 in the control group. the experimental group performed modalities and PNF total patterns three times for a week. the control group performed only modalities and ROM exercise three times for a week. Back muscle strength was measured by a back muscle strength measuring machine, the intensity of pain was measured by the Visual Analogue Scale (VAS), and the level of disability was measured by Oswestry low back pain disability index. Study measurements were compared before and after 6 weeks exercise program. The two groups of subjects were assessed by utilizing two different balance measurement: Static standing balance was measured by balance performance monitor (BPM) and Dynamic standing balance was measured by one leg standing(OLS). The scale for static standing balance was measured by using, sway area, sway path, max velocity. Results : The results of this study were as follow: 1) The score on visual analogue scale shows statistically significant increase on PNF group of post test(p<.05). 2) The score on Oswestry low back pain disability index. shows statistically significant decrease on PNF group of post test(p<.05). 3) The change sway area was statistically significant on pre-test and post-test(p<.05). 4) The change sway path was statistically significant on pre-test and post-test(p<.05). 5) The change max velocity was statistically significant on pre-test and post-test(p<.05). 6) The score on one leg standing shows statistically significant increase on PNF group of post test(p<.05). Conclusion : These results of this study indicated that Proprioceptive Neuromuscular Facilitation Total patterns which performed for six weeks had a statistically significant influence on low back pain. If the exercise for muscle strength is performed along with therapeutic stabilizing exercise, a better effect can be expected on low back pain. We hope that this study will provide a basic data for further research with a bigger group and on a long-term effect.

• Journal of the Korean Dietetic Association
• /
• v.10 no.2
• /
• pp.235-245
• /
• 2004

The Korea School Lunch Program mandates that school meals should safeguard the health and well-being of our children. School meals provide a nutritious diet that contains at least ⅓ of the daily Recommended Dietary Allowances of necessary nutrients at reasonable prices. This study was performed to assess the nutritional management of primary school meals, and to provide basic data for improvement of school meal nutritional guidelines. Three hundred and thirty six dietitians who worked at primary schools were recruited using a stratified sampling method. A survey was done by e-mail with a set of questionnaires about nutritional meal management. During school lunch planning, dietitians referred nutrition standards with priority, followed by students' food preferences and food hygiene. They considered energy as a most important nutrient during primary school lunch planning, followed by protein and calcium. Protein is usually over-served, whereas iron, vitamin A and calcium are usually under-served during primary school meal planning. For first and second grade primary students, grains, meat and vegetable side dishes seemed to be large compared to their eating capacity. Over 92% of school dietitians agreed the needs of food group standards for primary school lunch program. For making a checklist of the school lunch program, energy, protein and calcium were highly recommended, and meat.fish.egg group, vegetable.fruit group and dairy group were also highly recommended by school dietitians. Cooking method was also highly recommended. School dietitians proposed that remodeling of school kitchens and new cooking machine were the most important factors for improving school lunch system. These results suggest that food standards should be established for health-oriented nutritional management of primary school lunch programs. Nutritional checklists could include nutrient-rich foods and food groups, and items about cooking methods.

• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.507-528
• /
• 2011

Agricultural workers who mix/loads and spray pesticide in fields expose to pesticide through dermal and inhalation routes. In such situation, exposed amount should be measured quantitatively for reasonable risk assessment. Patch, gloves, socks and mask will be good materials for monitoring for dermal exposure while personal air monitor equipped with solid adsorbent and air pump will be a tool for inhalation exposure. For extrapolation of absorbed amount in dermal exposure matrices and of trapped amount in solid sorbent to total deraml or inhalation exposure, Korean standard body surface area and respiration rate were proposed in substitution of EPA data. Important exposure factors such as clothing and skin penetration ratio of dermal and inhalation exposure were suggested based on Spraying time for exposure monitoring must be long enough that the amount of pesticide to get absorbed/trapped in exposure matrices results in reasonable analytical value. In domestic case for the both of speed sprayer and power spray machine, spraying time of 20~40 minutes (0.1~0.2 ha) will be reasonable per single replicate before extrapolating to 4 hours a day with triplicates experiment.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.5
• /
• pp.169-176
• /
• 2020

Recently, deep neural networks (DNNs) have brought revolutions to many mobile and embedded devices by providing human-level machine intelligence for various applications. However, high inference accuracy of such DNNs comes at high computational costs, and, hence, there have been significant efforts to reduce computational overheads of DNNs either by compressing off-the-shelf models or by designing a new small footprint DNN architecture tailored to resource constrained devices. One notable recent paradigm in designing small footprint DNN models is sharing parameters in several layers. However, in previous approaches, the parameter-sharing techniques have been applied to large deep networks, such as ResNet, that are known to have high redundancy. In this paper, we propose a parameter-sharing method for already parameter-efficient small networks such as ShuffleNetV2. In our approach, small templates are combined with small layer-specific parameters to generate weights. Our experiment results on ImageNet and CIFAR100 datasets show that our approach can reduce the size of parameters by 15%-35% of ShuffleNetV2 while achieving smaller drops in accuracies compared to previous parameter-sharing and pruning approaches. We further show that the proposed approach is efficient in terms of latency and energy consumption on modern embedded devices.

• Journal of agricultural medicine and community health
• /
• v.23 no.1
• /
• pp.3-14
• /
• 1998

To investigate the actual states of farmers syndrome and their related factors, the author surveyed a total of 534 rural residents, resided in Puyeo kun, Chungnam Province, during August 1996. The data were collected from members of an association and their families of agricultural co-operatives, and analysed. Following are the results summarized therefrom; 1. The prevalence rate of farmers syndrome as a whole was 36.7%, but that of female was higher as 45.0% than male as 27.4%. 2. The prevalence rates of farmers syndrome were higher in the group of higher age, shorter education years, longer farming careers, and longer daily farming hours. 3. The prevalence rates of farmers syndrome did not show statistically significantly different among groups of farming categories such as specialize in farming, such as side line, and not farming. 4. Sex, age, and daily farming hours were proved to be a related factors of farmers syndrome by logistic regression analysis. Odds ratio of female group was 2.06 compared with male group, above 70 years age group was 6.24 compared with below 40 years age group, and group of farming more than 8 hours a day was 2.55 compared with not farming group. 5. The mean scores of self-estimated health states of the group with farmers syndrome was lower than those with negative or suspicious farmers syndrome, but the mean scores of psychological symptoms, other than symptoms of farmers syndrome was statistically significantly higher in farmers syndrome group. Consequently, farmers syndrome seems to be not disease entity but symptom complex which is highly related with age and sex. For that reason, there is a need of study on the differentiate the farmers syndrome and chronic musculoskeletal diseases in the aged.

• The korean journal of orthodontics
• /
• v.24 no.2
• /
• pp.233-246
• /
• 1994

The purpose of the present study was to investigate the difference of muscular activities of the tongue and lip muscles between anterior open-bite and normal occlusion during various function. Thirty eight subjects of 12.1-39.6 years were employed in this study : Eighteen subjects were anterior open-bites and tweenty subjects were normal occlusions. During rest position, maximum effort of lip sealing, command swallow of saliva and sucking & swallowing of juice, the electromyographic datas of the genioglossus, superior longitudinal muscle of tongue, upper and lower orbicularis oris were recorded and integrated with Medelec MS 25 electromyographic machine. Lateral cephalometric radiographs were taken on all subjects for the analysis of tongue posture and size. All data were recored and statistically processed. The findings of this study can be summerized as follows : 1. During the rest position, muscular activity of tongue was higher than that of lip muscle in open-bite, but no difference in normal occlusion group. 2. During the swallowing of juice, the activity of orbicularis oris was higher than that of genioglossus in open-bite. But the normal occusion was showed higher activity of tongue during the swallowing of juice. 3. The open-bite, compared to the normal occlusion, had higher value of tongue muscle activity during the rest position. 4. Compared to normal occlusion group, the open-bite had higher value of lip muscle activity during the sucking and swallowing of juice. 5. During the command swallow of saliva, the normal occlusion was showed harmonious swallowing pattern, but the open-bite showed much variation and disharmony in muscular contraction sequence, tended to absent of lip muscle activity. 6. At the lateral cephalometric radiographs, compared to the normal occlusion, the open-bite was showed lower tongue posture. But no difference was found in intermaxillary space. It is suggested that the open-bite, compared to the normal occlusion, had higher muscular activity of tongue during the rest position and various functions, showed lower tongue posture on the lateral cephalogram. In the development of anterior open-bite malocclusion, these factors may be an etiologic factor.

• Imaging Science in Dentistry
• /
• v.42 no.3
• /
• pp.139-146
• /
• 2012

Purpose: An individual surgical stent fabricated from computed tomography (CT) data, called a CT-guided stent, would be useful for accurate installation of implants. The purpose of the present study was to introduce a newly developed CT-guided stent with a simple design and evaluate the accuracy of the stent placement. Materials and Methods: A resin template was fabricated from a hog mandible and a specially designed plastic plate, with 4 metal balls inserted in it for radiographic recognition, was attached to the occlusal surface of the template. With the surgical stent applied, CT images were taken, and virtual implants were placed using software. The spatial positions of the virtually positioned implants were acquired and implant guiding holes were drilled into the surgical stent using a specially designed 5-axis drilling machine. The surgical stent was placed on the mandible and CT images were taken again. The discrepancy between the central axis of the drilled holes on the second CT images and the virtually installed implants on the first CT images was evaluated. Results: The deviation of the entry point and angulation of the central axis in the reference plane were $0.47{\pm}0.27$ mm, $0.57{\pm}0.23$ mm, and $0.64{\pm}0.16^{\circ}$, $0.57{\pm}0.15^{\circ}$, respectively. However, for the two different angulations in each group, the $20^{\circ}$ angulation showed a greater error in the deviation of the entry point than did the $10^{\circ}$ angulation. Conclusion: The CT-guided template proposed in this study was highly accurate. It could replace existing implant guide systems to reduce costs and effort.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.1
• /
• pp.111-137
• /
• 1991

Although a number of studies have been performed to assure that residual stress caused by a mismatch of alloy porcelain thermal expansion can contribute to clinical failure of a ceramometal restoratoin, the interactive influence of cooling rate on the magnitude of thermal expansion difference and on bond strength between them have not been extensively analyzed. The objective of this study was to determine the influence of cooling rate and the number of firing cycles on the expansion mismatch and the flexural failure resistance of metal porcelain strip. Tested alloys included one Pd-Ag alloy, one Ni-Cr-Be alloy with two kinds of porcelain, Vita and Ceramco. Metal specimens were cast into rods with a height of 13mm and a diameter of 5mm. Subsequently, the castings were subjected to scheduled firing cycles without porcelain. And the porcelain specimens after being fired were trimmed into a bar with a final dimension of 5 x 5 x 25mm. Thermal expansions of the alloys and porcelains were measured by using a push rod or a differential dialometer respectively. Porcelain glass transition temperatures and expansion values were derived alloy- porcelain pairs were assessed by comparing expansion values of the components at a porcelain glass transition temperature. Calculations were made using combinations of a Ni-Cr alloy or Pd-Ag alloy with each of two porcelain products. Metal- porcelain strip specimens were subjected to four point loading in an Instron testing machine until crack occured at the metal-cramic interface at the time of sharp decrease of load on recorder. On the basis of this study, the following conclusions may be stated : 1. Regardless of the kinds of ceramometal combinations, both of calculated and experimental data revealed that the double fired specimens exhibited a significantly lower flexural strength. 2. By the rise of the amount of mismatch, bond strength were decreased. 3. Thermal expansion value of Pd-Ag alloys were higher than of Ni-Cr alloys. 4. Expansion curves of metal were proportional to the increase of temperature and were not affected by the experimental conditions, however porcelains did not show the same magnitude of metal, and a shift of the glass transition temperature to higher temperatures was observed when cooled rapidly. 5. Alloy- porcelain thermal compatibility appeared more dependent on the porcelain than the alloy.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.4
• /
• pp.377-383
• /
• 2013

This study examined the radiopacity of eight contemporary luting cements by direct digital radiography. Five disc-shaped specimens ($5mm{\times}1mm$) were prepared for each material tested (BisCem, Clearfil SA Luting, Duolink, Maxcem Elite, Multilink Speed, Panavia F 2.0, RelyX Unicem Clicker, V-link). The specimens were radiographed using a Kodak CS 7600 image plate (Carestream Health, Inc., Rochester, NY, USA) and an aluminum step wedge with a range of thicknesses (1.5 to 16.5 mm in 1.5 mm increments) and a 1 mm tooth used as a reference. A dental X-ray machine Kodak 2200 Intraoral X-ray System (Carestream Health, Inc., Rochester, NY, USA), operating at 70 kVp, 4 mA, 0.156 s and a source-to-sample distance of 30 cm, was used. According to international standards, the radiopacity of the specimens was compared with that of an aluminum step wedge using NIH ImageJ software (available at http://rsb.info.nih.gov/ij/).The data was analyzed by ANOVA and a Tukey's post hoc test. Maxcem Elite (5.66) showed the highest radiopacity of all materials, followed in order by Multilink Speed (3.87) and V-link (2.83). The radiopacity of Clearfil SA Luting (1.35), BisCem (1.33), Panavia F 2.0 (1.29) and Duolink (1.10) were between enamel (1.79) and dentin (0.19). RelyX Unicem Clicker (0.71) showed the lowest radiopacity, which was higher than that of dentin. All materials showed a radiopacity above the minimum recommended by the International Organization for Standardization and the American National Standards/American Dental Association with the exception of RelyX Unicem Clicker.