In this study, the correlation between temperature and the gel-content of the module were analyzed through experiments. Amorphous thin-film solar cell used in this experiment has a visible light transmission performance of 10%. In addition, ethylene vinyl acetate(EVA) film and the clear glass have been used for the modulation. The most important process is to laminate the module in the manufacturing process of BIPV(Building integrated photovoltaic) module. Setting parameters of laminator in the lamination process are temperature, pressure and time. Setting conditions significantly affect the durability, watertightness and airtightness of module. The most important factor in the setting parameters is temperature to satisfy the gel-contents. The bottom and top surface temperature of module are measured according to setting temperature of laminator. The results showed $145^{\circ}C$ of max temperature of the bottom surface and $128^{\circ}C$ of max temperature of top surface on the module at the temperature condition of $160^{\circ}C$. And at the another temperature condition of laminator with $150^{\circ}C$, the max temperature do bottom and top are $117^{\circ}C$ and $134^{\circ}C$ respectively. The temperature difference between bottom and top of the module occurred, that is because heat has been blocked by the clear glass and the bottom of the cells absorb the heat from the laminator. In this particular, the temperature difference between setting temperature of the laminator and the surface temperature of the module showed $15^{\circ}C$, because the heat of laminator plate is transferred to the surface of the module and heat is lost at this time. As a results, gel-content showed 94.8%, 88.7% and 81.7% respectively according to the setting temperature $155^{\circ}C$, $150^{\circ}C$ and $145^{\circ}C$ of the laminator. In conclusion, the surface temperature of module increases, the gel-contents is relatively increased. But if the laminator plate temperature is too high, the gel-content shows rather decline in performance. Furthermore, the temperature difference between setting temperature and the surface temperature of the module is affected by laminating machine itself and the temperature of module should be considered when setting the laminator.
For several decades, industrial processes consume a huge amount of raw water for various objects that consequently results in the generation of large amounts of wastewater. Wastewaters are consisting of complex mixture of different inorganic and organic compounds and some of them can be toxic, hazardous and hard to degrade. These effluents are mainly treated by conventional technologies such are aerobic and anaerobic treatment and chemical coagulation. But, these processes are not suitable for eliminating all hazardous chemical compounds form wastewater and generate a large amount of toxic sludge. Therefore, other processes have been studied and applied together with these techniques to enhance purification results. These include photocatalysis, absorption, advanced oxidation processes, and ozonation, but also have their own drawbacks. In recent years, electrochemical techniques have received attention as wastewater treatment process that could be show higher purification results. Among them, boron doped diamond (BDD) attract attention as electrochemical electrode due to good chemical and electrochemical stability, long lifetime and wide potential window that necessary properties for anode electrode. So, there are many researches about high quality BDD on Nb, Ta, W and Si substrates, but, their application in effluents treatment is not suitable due to high cost of metal and low conductivity of Si. To solve these problems, Ti has been candidate as substrate in consideration of cost and property. But there are adhesion issues that must be overcome to apply Ti as BDD substrate. Al, Cu, Ti and Nb thin films were deposited on Ti substrate to improve adhesion between substrate and BDD thin film. In this paper, BDD films were deposited by hot filament chemical vapor deposition (HF-CVD) method. Prior to deposition, cleaning processes were conducted in acetone, ethanol, and isopropyl alcohol (IPA) using sonification machine for 7 min, respectively. And metal layer with the thickness of 200 nm were deposited by DC magnetron sputtering (DCMS). To analyze microstructure X-ray diffraction (XRD, Bruker gads) and field emission scanning electron microscopy (FE-SEM, Hitachi) were used. It is confirmed that metal layer was effective to adhesion property and improved electrode property. Electrochemical measurements were carried out in a three electrode electrochemical cell containing a 0.5 % H2SO4 in deionized water. As a result, it is confirmed that metal inter layer heavily effect on BDD property by improving adhesion property due to suppressing formation of titanium carbide.
Phipek, W.;Nagasinha, C.;Vallisuth, S.;Nongyao, C.
Asian-Australasian Journal of Animal Sciences
/
제24권9호
/
pp.1268-1273
/
2011
The present study was conducted to determine a feasible method of protein concentrate extraction from rice bran (RBPC) and its effect as a substitution for skim milk in early weaning pig diets. An investigation to extract protein concentrate from full fat rice bran was undertaken to determine the best ratio of water and rice bran, the amount of NaOH and a HCl solvent to use in a simple paddle-type mixer with modified spinning to produce RBPC. The results stated that the best ratio for water mixing in the RBPC extraction process was 1:5 with 20 g NaOH and 30 min in a paddle-type mixer at 300 rpm. A mix of 250 ml 0.2 N HCl was optimum for neutralization and protein precipitation. After the fluid was spun out with a washing machine, the sediment was left for 12-14 hours to complete the filtration. One kilogram of rice bran could produce an average of 324.5 gram RBPC and it contained 3.40% ash, 496.48 kcal of GE/100 gram, 1.94% crude fiber, 28.20% ether extract, 7.64% moisture and 16.66% crude protein, respectively. A total of 45 crossbred piglets, weaned at 3 weeks of age were allotted into control diet (A) and dietary treatments formulated with a four different rates of RBPC substitution for skim milk at a percentage of 25 (B), 50 (C), 77 (D) and 100 (E) respectively, in a randomized complete block (RCB) design. All piglets had free access to feed and water until 8 week of age when the experiment ended. Feed intake, average daily gain, growth rate and feed efficiency were not affected by dietary treatments. Blood test parameters after completion of the growth trial indicated normal health. Even though the mean of cell hemoglobin concentration was significantly different between treatments (p<0.05) it was still within the normal range. The cost difference for BW gain of 100% RBPC substituted for skim milk in the weaning diet was approximately 35% lower than that of the control and the relative cost of production was 96.67, 92.85, 70.75 and 64.48% lower for the replacement of 25, 50, 75 and 100% of skim milk respectively. These results implied that this technology is feasible for use by small scale farmers to improve their self-reliance.
본 논문에서는 FMC 로봇의 생산성 향상을 위해 시뮬레이션과 순차 패턴 기법을 이용해 로봇의 패턴을 분석하고 최적의 로봇 작업 우선순위규칙(Dispatching Rule)을 설계하는 방법을 제시하였다. 이를 위해, 먼저 FMC를 시뮬레이션으로 설계하고 각 설비가 로봇에게 요청하는 신호를 추출 해 이를 로그(Log) 형태로 생성, 저장하였다. 그 후, 이 로그를 데이터 마이닝 기법 중 하나인 순차 패턴 분석을 이용해 설비의 신호와 로봇간의 연관된 순서를 분석 하여 로봇의 최적 이동 경로를 도출하는 방법을 제시하였다. 또한, 사례연구를 통하여 FMC의 적용성에 대한 효율성 을 입증하였다. 도출된 최적의 패턴을 국내 A사 생산라인에 적용한 결과 작업물 대기시간(Loss Time)의 감소와 로봇 이용률의 향상, 작업물의 총 처리량의 증가와 평균 처리시간 감소를 가져왔다. 또한, 이러한 신호의 패턴을 이용한 분석 방법은 신호와 동작간의 로그를 저장, 데이터베이스화하여 시스템 상에서 로봇의 작업 우선순위규칙을 도출할 수 있게 하므로, 작업자의 오랜 노하우(Know-How) 없이도 로봇 운영의 문제점을 파악하고 그 개선안을 제시할 수 있다. 이러한 방법을 통해 FMC 뿐만이 아닌 로봇을 사용하는 모든 분야에 설비의 신호와 로봇 동작간의 그 연관관계를 분석하고 최적의 운영법칙을 설계, 운영하여 생산성 향상에 크게 기여할 것으로 기대된다.
고정성 장치를 이용한 교정 치료는 심미적 개선이 주목적 중 하나이나, 금속재 브라켓은 치료기간 동안 비심미적으로 보이는 단점이 있다. 이러한 이유로 치아색과 유사한 심미적 브라켓이 선호되었으나 호선과의 마찰저항이 금속재 브라켓보다 큰 것으로 알려져 있다. 본 연구는 최근 개발된 심미적 브라켓의 일종인 인산칼슘재 브라켓의 마찰저항을 측정하고 기존 금속재 브라켓과 금속슬롯 삽입형 도재 브라켓과의 마찰저항의 차이를 구명(究明)해 보고자 하였다. 실험군으로서 인산칼슘 재질의 Hyaline II (Tomy, Tokyo, Japan) 브라켓을, 대조군으로서 metal slot이 삽입된 도자기 재질인 Clarity (3M Unitek, Monrovia, CA, USA) 브라켓과 스테인레스 스틸 금속재 브라켓인 Kosaka (Tomy, Tokyo, Japan) 브라켓을 사용하고, $0.019\;{\times}\;0.025$ 인치 스테인레스 스틸 강선 (3M Unitek, Monrovia, CA, USA)을 이용하며 결찰재는 합성고무링 (Ormco, Glendora, CA, USA)을 사용하였다. 치아의 생리학적 환경을 재현하기 위해 모의 생물학적 모형을 고안하였으며 이에 강선을 삽입하여 load cell (Push & pull gauge, RX-2 AIKOH, Osaka, Japan)로 분당 5 mm로 견인하며 만능시험기(Instron4467, Instron, Norwood, MA, USA)로 마찰저항을 측정하였다. 실험결과, 실험군인 인산칼슘 재질 브라켓의 마찰저항은 대조군인 금속슬롯 삽입형 도재 브라켓 보다 작고 (p < 0.01) 금속재 브라켓의 마찰저항보다 크게 나타나 (p < 0.05), 인산칼슘재 브라켓은 심미적 측면에서 금속재 브라켓을, 효율적 측면에서 금속슬롯 삽입형 도재 브라켓을 대체하여 사용 가능함을 시사하였다.
멥쌀, 찹쌀, 찐멥쌀의 수분함량(9, 12, 15, 18%)과 즉석팽화기의 팽화온도(200, 210, $220^{\circ}C$)를 달리하여 제조한 즉석팽화스낵의 체적밀도, 색도, 수분용해지수와 수분흡착지수, 미세구조 등의 물리적 특성을 조사하였다. 즉석팽화스낵 제조 시 수분함량과 팽화온도가 증가함에 따라 체적밀도는 감소하는 경향을 나타내었다. 색도에서 수분함량이 감소할수록, 팽화온도가 증가할수록 L값은 감소하는 경향을 나타내었고 a, b값은 증가하는 경향을 나타내었다. 수분용해지수와 수분흡착지수는 수분함량과 팽화온도가 증가할수록 증가하는 경향을 나타내었다. 멥쌀, 찹쌀, 찐멥쌀 간에는 체적밀도, 파괴력, 수분용해지수와 수분흡착지수에서 차이를 나타내었고 색도에서는 큰 차이를 나타내지 않았다. 미세구조는 수분함량이 9%에서 15%로 증가함에 따라 기공의 크기가 작고 균일하게 분포되었으며 찹쌀 즉석팽화스낵의 기공이 가장 작고 균일하게 나타났다.
남해안에서 정치망 어구의 고정용으로 사용되고 있는 닻가지(fluke)가 하나인 스톡형닻(A형), 닻가지 2개가 한 방향으로 달려 있는 스톡형닻(B형), 닻가지 2개가 좌우로 달려 있는 스톡형닻(C형) 세가지의 모형을 제작하여 들의 종류(펄, 모래, 모래펄)와 닻줄의 길이(수심의 2배, 2.5배, 3배, 3.5배, 4배)에 따른 모형별 장력, 파주력, 파주력계수를 비교 분석하였다. 모형실험의 결과를 요약하면 다음과 같다. 1. 장력과 파주력은 저질별로는 펄에서 가장 크고, 모래펄, 모래 순으로 작아진다. 닻줄의 길이에 따라서는 닻줄이 길어질수록 장력과 파주력이 커지는 현상을 보였고, 닻의 종류별로는 B형이 가장 크고, A형, C형의 순으로 나타났다. 2. 닻가지의 단위면책당 파주력은 닻줄이 짧을 때는 A형이 가장 크고, 길 때는 A형과 B형이 거의 비슷하며, C형은 모든 길이에서 A형과 B형에 비하여 거의 절반 수준이었다. 3. 파주력계수는 펄에서 가장 크고, 모래펄, 모래 순이며, 닻의 종류별로는 A형이 가장 크고, B형, C형의 순으로 나타났다. 4. 정치망 고정용 닻의 성능은 조류방향이 항상 일정한 어장에서는 A형이 우수하며, 이상조류가 발생하는 어장에서는 B형이 어구의 안정적인 고정을 위하여 우수할 것으로 판단된다.
옥수수전분과 찰옥수수전분을 사용하여 중간 수분계의 수분함량으로 반죽을 제조하고 수분함량과 가열온도, 가열시간에 따른 전분 반죽의 물성 변화와 호화양상을 밝혀보고자 하였다. 이를 위하여 먼저 전분반죽과 같은 반고체(semi-solid) 물질의 물성을 측정할 수 있는 Extrusion Capillary Viscometer(ECV)를 자체 제작하였다. ECV를 사용하여 수분함량 $36{\sim}52%$ 범위로 제조된 옥수수전분과 찰옥수수전분 반죽의 물성측정 시 반죽의 열전달 특성은 가열온도 $60{\sim}100^{\circ}C$ 범위에서 수분함량이 36%에서 52%로 증가할수록 반죽의 중심온도가 원하는 가열온도에 도달하는데 걸리는 시간이 220초에서 140초로 크게 단축되었다. 가열 후 ECV로 물성을 측정한 결과, 수분함량과 가열온도의 모든 범위에서 반죽은 의가소성 유체의 흐름 특성을 나타내었다. 동일한 전단속도에서는 반죽 수분함량이 증가할수록 전단응력과 전단점도가 전체적으로 감소하여 수분함량 증가에 따른 반죽의 유동성(flowability) 증가 영향이 매우 큰 것으로 나타났다. 그러나 44% 이상의 동일 수분함량 내에서는 $80^{\circ}C$ 이상의 가열온도부터는 동일한 전단속도에서 $80^{\circ}C$ 이하로 가열한 반죽에 비해 전단응력과 전단점도가 증가하는 경향을 보여 주었다. 반죽의 점도에 미치는 수분함량의 영향은 수분함량이 증가할수록 반죽의 유동성의 크기가 증가하여 전체적으로 전단응력이나 점도가 감소하는 것으로 나타나지만, 가열온도가 호화온도 이상인 $80^{\circ}C$부터는 전분호화에 의한 점도 증가에 의하여 수분함량에 따른 농도 의존성지수(B)값이 크게 감소하고 $60^{\circ}C$나 $70^{\circ}C$ 가열온도보다도 수분함량의 영향이 적게 미치는 것으로 나타났다.
Human being can't live without nature, then the changes of nature affect human body. It means that human body has corresponding changes to the KI(vital energy) of nature. There is a stream of changes in human body which circulate mysteriously and punctually by the laws of nature. If this stream of changes fits into human's life style, it would be most effective. It has a certain mode continuously. So if a person has a habit fitting into it, he will get the healthiest body. Then the researcher tries to explain the changes in human body by the time, mainly focused on within 24 hours. it is showing not only the oriental view, but also the western's. The researcher can find the coincidence as followings. At In-Si(3-5 am), the body function and the body temperature get to the bottom, therefore it's good for him to wake up and to run the vital energy. At Sa-Si(9-11 am), the patience on pain anxiety and the psychic concentration get to the top, he'd better start the work. At O-Si(11am-1pm), the heart energy has a vital move, then the blood concentration of Hb(hemoglobin) gets to the top. At Mi-Si(1-3 pm), the muscle strength, the squeeze, and the breathing rate increase. The reflex nerve sensitivity gets to the top. Creativity, observation, and working efficiency go high, so it's time to work hard. At Hae-Si(9pm-1am), the body function falls, sleeping is needed. At Chuck-Si(1-3 am), the cell spontaneity gets to the top, immune lymphocyte moves actively, and the blood concentration of growth hormone gets to the top. These are liver's work. In west, there has been active studies on how to reduce the side effect by using a person's bio-rhythm based on the 'time treatment', and how to reorganize the bio-rhythm by using the machine and the age resistance based on the 'bio-watch'. Though the 'time treatment' means something, the artificial resistance on bio-rhythm seems to give bad effects to human body. If a person lives by regimen of oriental medicine, he will maintain the healthiest body. Regimen is that human body follows the laws of nature, and moves its mysterious, Punctual and periodical changes.
남조류의 대발생은 대량 번성 및 사멸에 따라 수체 내 산소 고갈 및 유기물 증가와 같은 문제를 야기하고 있다. 매년 여름철 폭염 및 가뭄의 영향으로 조류대경보가 발령되고 있으며, 낙동강 본류 구간의 선제적 녹조관리를 위해 남조류 발생특성을 정량적으로 규명할 필요가 있다. 본 연구에서는 시각화 분석 및 상관관계 분석을 이용한 남조류 발생 주요 영향인자 분석과 더불어 머신러닝 기법인 의사결정나무를 이용하여 영향인자에 따른 남조류 발생조건을 정량적으로 분석하였다. 8개 보 모든 지점에서 기상학적 요인인 기온과 SPI 가뭄지수는 남조류 세포수와 유의한 상관관계 특성을 보였다. 이는 폭염일수 증가 및 가뭄에 따른 수체 내 물의 혼합 차단 및 성층현상이 지속되어 남조류 발생을 촉진시키는 것으로 보여지며, 장기적으로 기상학적 영향을 고려한 남조류 발생의 선제적 관리도 필요할 것으로 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.