• 월간산업보건
• /
• s.300
• /
• pp.4-7
• /
• 2013

m-Phenylenediamine의 직업적 노출기준 TLV-TWA $0.1mg/m^3$은 간 손상을 최소화하기 위하여 권고하였다. 또한 이 수준은 피부 자극이나 피부염을 예방하기 위한 기준이다. 흰쥐와 생쥐에게 m-phenylenediamine을 처치한 후의 발암성이 음성적이거나 명확하지 않은 결과로 A4(Not Classifiable as a Human Carcinogen, 사람에게 발암성으로 분류되지 않음)로 권고하였다 m-Phenylenediamine을 생산하는 근로자들에서 피부 알레르기반응이 있었다는 제한적인 자료도 있었지만 피부(Skin)와 감작제(SEN)의 경고주석 그리고 TLV-STEL을 권고하기에는 유용한 자료가 충분하지는 않다.

• BMB Reports
• /
• v.34 no.3
• /
• pp.225-229
• /
• 2001

Besides a variety of quinones, purified bovine liver quinone reductase catalyzed the reduction of N,N-p-nitrosoaniline to N,N-dimethyl-p-phenylenediamine. The formation of N,N-dimethyl-p-phenylenediamine was identified by TLC, GC, GC-MS and NMR. Quinone reductase can utilize either NADH or NADPH as a source of reducing equivalents. The apparent Km for 1,4-benzoquinone and N,N-dimethyl-p-nitrosoaniline was 1.64 mM and 0.22 mM, respectively The reduction of N,N-dimethyl-p-nitrosoaniline was almost entirely hampered by dicumarol or Cibacron blue 3GA, potent inhibitors of mammalian quinone reductase. During the bovine liver quinone reductase-catalyzed reduction of N,N-dimethyl-p-nitrosoaniline, benzoquinonediiminium ion was produced.

• Journal of the Korean Chemical Society
• /
• v.17 no.1
• /
• pp.60-66
• /
• 1973

When m-phenylenediamine (MPD) or m-aminophenol (MAP) was treated with formaldehyde(F), under $N_2$ stream, at the temperature $-5\sim0^{\circ}C$, addition condensation occurred and insoluble resins formed immediately. Under the same reaction conditions m-phenylenediamine, m-aminophenol and formaldehyde also easily copolycondensed and insoluble MPD-MAP-F type copolymer formed. MPD-MAP-F type copolycondensed resin was superior in both heat-resistant property and adsorptivity of Bromophenol Blue or Methylene Blue than the MPD-F and MAP-F type resins. From the result of TGA, under $N_2$stream, MPD-MAP-F resin showed about $40\%$ weight loss at $800^{\circ}C$, and this type of resin 1g adsorbed 308mg of Bromophenol Blue.

• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.231-236
• /
• 2005

Amino terminated polyetherimide (AP-PEI) has been synthesized using 2,2'-bis [4-(3,4-dicarboxyphenoxy)-phenyl]propane dianhydride (BPADA) and m-phenylenediamine. Polyetherimide containing pendant carboxy group (CP-PEI) has also been synthesized by the reaction of BPADA, m-phenylenediamine and 3,5-diaminobenzoic acid. The modified PEIs were used as toughening agent for diglycidyl ether of bisphenol-A epoxy resin which was cured with nadic methyl anhydride (NMA). Thermal properties, fracture toughness ($K_{IC}$) and solvent resistance of toughened epoxy resin were measured. The $K_{IC}$ of epoxy resin containing 20 phr of AT-PEI was 2.88$MPa{\cdot}m^{0.5}$ without sacrificing thermal properties. The $K_{IC}$ of epoxy resin which contained 20 phr of CP-PEI was 2.82$MPa{\cdot}m^{0.5}$.

• Journal of the Korean Chemical Society
• /
• v.49 no.3
• /
• pp.288-291
• /
• 2005

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.375-380
• /
• 2002

Diamines (p-phenylenediamine , m-phenylenediamine , and n-hexamethylenediamine) were intercalated into sodium montmorillonite for the further reaction with the anhydride end groups of polyamic acid. The anhydride terminated polyamic acid was synthesized using a mole ratio of 4,4'-oxydianilline : 1,2,4,5-benzene tetracarboxylic dianhydride = 1.50 : 1.53. The modified montmorillonite was reacted with polyamic acid terminated with anhydride group in N-methyl-2-pyrrolidone (polyamic acid/clay nanocomposite). After imidization, thin films of the polyimide/clay nanocomposite were prepared. From the results of XRD and TEM, we found that mono layered silicates were dispersed in polyimide matrix and those resultants were exfoliated nanocomposites. Mechanical properties of exfoliated polyimide nanocomposite were better than both those of pure polyimide and those of intercalated polyimide nanocomposite.

• Journal of the Korean Chemical Society
• /
• v.67 no.5
• /
• pp.339-347
• /
• 2023

In this study, a nanocomposite of multi-walled carbon nanotubes@poly(p-phenylenediamine)-Prussian blue (MWCNTs@PpPD-PB) was synthesized and employed for the electrochemical detection of hydrogen peroxide (H₂O₂). A straightforward approach was utilized to prepare an electrochemical H₂O₂ sensor using a MWCNTs@PpPD-PB modified glassy carbon electrode, and its electrochemical behavior was investigated through techniques such as electrochemical impedance spectroscopy, cyclic voltammetry, and amperometry. The modified electrode displayed a favorable electrocatalytic response towards the reduction of H₂O₂ in an acidic solution. The developed sensor exhibited linearity in the concentration range of 0.005 mM to 2.225 mM for H₂O₂, with high sensitivity (583.6 ㎂ mM^-1cm^-2) and a low detection limit (0.95 ㎛, S/N = 3) at an applied potential of +0.15 V (vs. Ag/AgCl). Additionally, the sensor demonstrated excellent selectivity, reproducibility, and stability. Moreover, successful detection of H₂O₂ was achieved in real samples.

• Korean Journal of Food Science and Technology
• /
• v.25 no.5
• /
• pp.565-570
• /
• 1993

Peroxidase from Jerusalem artichoke tubers, which might be related to browning reaction, was purified by ammonium sulfate precipitation, DEAE-cellulose and Sephacryl S-200 chromatography. The optimum pH of the purified peroxidase was 5.0 and relatively stable at pH $5.0{\sim}6.0$ using substrate of p-phenylenediamine and $H_2O_2$. D-values for thermal inactivation at 60, 70 and $80^{\circ}C$ were 86, 45 and 33 sec, respectively. Activation energy was 4,111 J/mole. The enzyme showed the most sensitive specificity of substrate for p-phenylenediamine. The compounds such as 1mM potassium cyanide, 10mM sodium diethyldithiocarbamate, L-ascorbic acid, sodium hydrosulfite and L-cysteine inhibited completely while 1mM of $Ca^{2+}\;and\;Cu^{2+}$ activated the purified peroxidase.

• 월간산업보건
• /
• s.301
• /
• pp.10-14
• /
• 2013

• Korean Journal of Food Science and Technology
• /
• v.19 no.6
• /
• pp.506-514
• /
• 1987

Peroxidase was purified to a homogeneous state from Castanea Semen by ammonium sulfate precipitation, DEAE-cellulose column chromatography, gel filtration on sephadex G-100 and HPLC, and the purification fold was 65.3. The molecular weight of the enzyme was estimated to be about 35,000 by HPLC. In properties of the enzyme which was purified up to sephadex G-100 column chromatography, the optimum pH and temperature were 5.0 and $50^{\circ}C$, respectively. By heating the enzyme at $80^{\circ}C$ for 1.73 min., the enzyme activity was decreased to 10%. The enzyme was active toward aromatic amines such as o-phenylenediamine and p-phenylendiamine. Kinetic studies indicated a Km of 2.6mM for o-phenylenediamine at an optimal hydrogen-peroxide concentration and a Km of 10mM for hydrogenperoxide at an optimal o-phenylenediamine concentration. Among the reagents tested, L-ascorbic acid and sodium L-ascorbate inhibited significantly the enzyme, while $Ca^{++}$ and $Ba^{++}$ activated the enzyme at the concentration of 1mM and 5mM.