• 한국지하수토양환경학회지:지하수토양환경
• /
• 제10권2호
• /
• pp.28-34
• /
• 2005

본 논문은 유류로 오염된 부지를 DSB(Deep-site Biopile) system을 이용하여 정화함으로써 적용 가능한 현장특성을 평가하기 위한 것이다. 오염부지는 유류가 유출되어 깊이 약 2.5 m 부근에 위치하는 지하수의 흐름에 띠라 광범위하게 오염(총 $7,201m^3$) 되어 있었으며, 투수성이 좋은 Sand층으로 구성되어 있다. 부지 내 설치된 배관은 각 지점마다 독립적으로 제어될 수 있도록 하였으며, DSB system의 가동은 24시간을 기준으로 30분 가동/30분 정지되도록 하였다. 오염부지 내 오염원이 저감되는 현황을 파악하기 위하여 DSB system 가동시간에 따른 시료채취 작업을 수행한 결과, DSB system 가동 후 약 30여일 만에 총석유계탄화수소 및 BTEX 오염원이 약 50% 이상 저감되었으며 약 165일이 경과한 후에는 토양오염 확인기준 이하로 저감되어 정화작업이 정상적으로 완료되었다. 이와 같이 본 DSB system은 기존에 적용되어 왔던 생물학적 공법들과는 달리 높은 농도의 유류화합물로 오염되어 있는 토양 및 지하수를 약 6개월의 단기간에 효과적으로 처리할 수 있었으며 정화 system을 지상이 아닌 지중에 설치함으로써 별도의 부지가 확보되지 않은 경우에도 적용할 수 있는 특성이 있음을 알 수 있었다.

• Safety and Health at Work
• /
• 제10권2호
• /
• pp.229-236
• /
• 2019

Background: Emerging reports suggest the potential for adverse health effects from exposure to emissions from some additive manufacturing (AM) processes. There is a paucity of real-world data on emissions from AM machines in industrial workplaces and personal exposures among AM operators. Methods: Airborne particle and organic chemical emissions and personal exposures were characterized using real-time and time-integrated sampling techniques in four manufacturing facilities using industrial-scale material extrusion and material jetting AM processes. Results: Using a condensation nuclei counter, number-based particle emission rates (ERs) (number/min) from material extrusion AM machines ranged from $4.1{\times}10^{10}$ (Ultem filament) to $2.2{\times}10^{11}$ [acrylonitrile butadiene styrene and polycarbonate filaments). For these same machines, total volatile organic compound ERs (${\mu}g/min$) ranged from $1.9{\times}10^4$ (acrylonitrile butadiene styrene and polycarbonate) to $9.4{\times}10^4$ (Ultem). For the material jetting machines, the number-based particle ER was higher when the lid was open ($2.3{\times}10^{10}number/min$) than when the lid was closed ($1.5-5.5{\times}10^9number/min$); total volatile organic compound ERs were similar regardless of the lid position. Low levels of acetone, benzene, toluene, and m,p-xylene were common to both AM processes. Carbonyl compounds were detected; however, none were specifically attributed to the AM processes. Personal exposures to metals (aluminum and iron) and eight volatile organic compounds were all below National Institute for Occupational Safety and Health (NIOSH)-recommended exposure levels. Conclusion: Industrial-scale AM machines using thermoplastics and resins released particles and organic vapors into workplace air. More research is needed to understand factors influencing real-world industrial-scale AM process emissions and exposures.

• 한국산학기술학회논문지
• /
• 제21권12호
• /
• pp.10-15
• /
• 2020

파장 400 nm 이하의 자외선은 눈 건강에 매우 해롭다. 또한 고에너지 가시광도 망막 세포에 영향을 줄 수 있음이 최근에 밝혀졌다. 따라서 자외선 및 고에너지 가시광 차단 기능의 안경렌즈 개발이 시대적으로 요청되고 있다. 본 연구에서는 m-자일릴렌 디이소시아네이트 모노머와 2,3-bis((2-mercaptoethyl)thio)-1-propanethiol 모노머 및 벤트리아졸 UV 흡수제, 알킬인산에스터 이형제, 안료혼합물(CI solvent violet 13), 이염화부틸주석 촉매제 등의 혼합물을 인젝션 몰드 방법으로 열중합 공정을 적용하여, 굴절률 1.67의 고굴절률 폴리머 안경렌즈를 제조하였다. 제조된 폴리머 안경렌즈의 양면에 전자빔 진공증착 시스템으로 다층 반사방지 코팅을 하였다. 제조된 안경렌즈의 자외선 및 고에너지 가시광 차단 기능을 UV-visible spectrophotometer로 분석하였다. 그 결과 UV 흡수제를 0.5wt% 첨가한 폴리머 안경렌즈가 411 nm 파장 이하의 자외선 및 고에너지 가시광을 99 % 이상 차단하였다. 또한 460 ~ 660 nm 파장의 명소시 시각 민감도 10% 이상의 영역에서 평균 투과율이 97.9%를 나타내어 명소시에서 선명한 상을 얻을 수 있었다.

• 한국산업보건학회지
• /
• 제25권1호
• /
• pp.104-114
• /
• 2015

Objectives: The purpose of this study is to investigate the atmospheric concentration of VOCs and the urinary concentration of t,t-MA, HA, MA in the industrial complex of Yeosu, South Jeolla Province. Methods: In order to study seasonal patterns of air concentration of VOCs, measurements were taken at five sampling sites around Yeosu from June 2013 to June 2014. Urinary metabolite excretionsfrom 671 subjects, exposure and comparison area were analyzed. Results: The average concentration of VOCs in the air was 1.53ppb for benzene, 0.73ppb for toluene, 0.22ppb for ethylbenzene, 0.52ppb for xylene and 0.12ppb for styrene. The concentration of benzene was somewhat higher than the year-average standard ($5{\mu}g/m^3$, about 1.5ppb) of the domestic air-environment criteria newly established in 2010.The metabolic concentration of VOCs in the urine of the entire sample was analyzed at $47.76{\mu}g/g\;cr.$, 213.07mg/g cr., and $290.09{\mu}g/g\;cr.$ for t,t-MA, HA, and MA, respectively. Compared with the average values for Korea as presented in the first basic survey of national environmental conservation ( $49.8{\mu}g/g\;cr.$ for t,t-MA, 0.17g/g cr. for HA, and 0.26mg/g cr. for MA), the metabolic concentrations of HA and MA in urine were higher than the average values. Conclusions: The concentration of VOCs in the air and urinary metabolites of the exposed and control areas showed that the concentrations of all substances were higher in the exposed area than in the control area.

• Clinical and Experimental Reproductive Medicine
• /
• 제28권3호
• /
• pp.183-190
• /
• 2001

Objective: Recently, microdissection of tissue sections has been used increasingly for the isolation of morphologically identified homogeneous cell populations, thus overcoming the obstacle of tissue complexity for the analysis cell-specific expression of macromolecules. The aim of the present study was to establish the minimal conditions required for the RNA extraction and amplification from the cells captured by the laser captured microdissection. Methods : Mouse ovaries were fixed and cut into serial sections (7 im thickness). Oocytes were captured by laser captured microdissection (LCM) method by using PixCell $II^{TM}$ system. The frozen sections were fixed in 70% ethanol and stained with hematoxylin and eosin, while the paraffin sections were stained with Multiple stain. Sections were dehydrated in graded alcohols followed by xylene and air-dried for 20 min prior to LCM. All reactions were performed in ribonuclease free solutions to prevent RNA degradation. After LCM, total RNA extraction from the captured oocytes was performed using the guanidinium isothiocyanate (GITC) solution, and subsequently evaluated by reverse transcriptase-polymerase chain reaction (RT-PCR) for glyceraldehyde-3-phosphate-dehydrogenase (GAPDH). Results: With the frozen sections, detection of the GAPDH mRNA expression in the number of captured 25 oocytes were not repeatable, but the expression was always detectable from 50 oocytes. With 25 oocytes, at least 27 PCR cycles were required, whereas with 50 oocytes, 21 cycles were enough to detect GA PDH expression. Amount of the primary cDNA required for RT-PCR was reduced down to at least 0.25 $\grave{i}$ l with 50 oocytes, thus the resting 19.75 il cDNA can be used for the testing other interested gene expression. Tissue-to-slide, tissue-to-tissue forces were very high in the paraffin sections, thus the greater number of cell procurement was required than the frozen sections. Conclusion: We have described a method for analyzing gene expression at the RNA level with the homogeneously microdissected cells from the small amount of tissues with complexity. We found that LCM coupled with RT-PCR could detect housekeeping gene expression in 50 oocytes captured. This technique can be easily applied for the study of gene expression with the small amount of tissues.

• 한국산학기술학회논문지
• /
• 제17권12호
• /
• pp.482-487
• /
• 2016

파장 400 nm 이하의 자외선은 눈 건강에 매우 해롭다. 특히 UVA (315 nm ~ 400 nm)는 백내장, 설안염, 초자체경화 등을 유발할 수 있고, UVB (280 nm ~ 315 nm)는 결막염, 각막염 및 설안염 등을 일으킬 수 있다. 따라서 폴리머 안경렌즈를 사용함에 있어서 자외선의 차단 기능과 가시광선 영역에서 투과되는 빛을 증가시키고, 안경렌즈 표면에서 형성되는 허상을 방지하는 반사방지 기능은 매우 중요하다. 본 연구에서는 m-자일릴렌 디이소시아네이트 모노머와 2,3-Bis-1-propanethiol 모노머 및 벤조트리아졸 UV 흡수제 (SEESORB 709), 안료 혼합물, 이염화 이부틸 주석 촉매제, 알킬인산 에스터 이형제 등의 혼합물을 인젝션 몰드 방법으로 열중합 공정을 적용하여, 굴절률 1.67의 고굴절률 폴리머 안경렌즈를 제조하였다. 폴리머 안경렌즈 표면에서의 반사를 줄이기 위하여 렌즈 양면에 다층박막 반사방지 코팅을 E-beam 증착 시스템으로 코팅하였다. 자외선 차단 폴리머 안경렌즈의 광학적 특성을 UV-visible spectrometer로 분석하였고, 반사방지층을 구성하는 박막의 굴절률, 표면거칠기 등과 같은 박막소재 특성을 각각 Ellipsometry 및 원자힘 현미경으로 분석하였다. 분석 결과 제조된 안경렌즈는 395 nm 파장 이하의 자외선을 99% 이상 완벽하게 차단하였다.

• 한국대기환경학회지
• /
• 제34권1호
• /
• pp.56-75
• /
• 2018

Korean Photochemical Assessment Monitoring Stations (PAMS) have been established since the late 2001 to monitor ambient air concentrations of VOC species, which would enhance understanding photo-chemical formation of ozone and subsequently contribute to developing efficient ozone control strategies. The present study aims at identifying major VOC species and examining their trends by analyzing PAMS monitoring data collected from the year 2006 to 2016. All the 18 PAMS sites operated by the Ministry of Environment were included in the study. PAMS monitored the 56 target VOC species, which are classified into four groups, alkenes, lower alkanes ($C{\leq}3$), higher alkanes ($C{\geq}4$), aromatics. The higher alkanes and aromatics dominated over the lower alkanes and alkenes in the type 2 and 3 PAMS sites except Joongheung site. N-butane was a major alkane species, toluene was a major aromatic species and most of VOCs showed decreasing trends in these sites. On the other hand, only the alkenes showed decreasing trends at the Joongheung site in Yeosu. Major sources of abundant species such as ethane, propane, n-butane, toluene were estimated by analyzing seasonal variations, correlation with other VOC species, and emission profiles. A major source of n-butane was identified as LPG cars, while major sources of toluene varied considerably from one site to another. The lower alkanes were composed of ethane and propane, both of which showed a strong seasonal variation, low in the summer and high in the winter, indicating that a major source might be the heating by gaseous fuels. Ozone formation potentials of VOC species were evaluated by applying MIR and POCP to the measured VOC species concentrations. Toluene contributed the most to total ozone forming potentials followed by m,p-xylene for all the type 2 and 3 PAMS sites except for two sites in Yeosu-Gwangyang. Ethylene and propylene were the first and second contributors to total ozone forming potentials at Joongheung site in Yeosu.

• 한국환경보건학회지
• /
• 제50권1호
• /
• pp.36-42
• /
• 2024

Background: The use of scented candles and incense sticks, both of which are household products that are burned for indoor deodorization and calming effects, is increasing. Fine dust has been designated as a group 1 carcinogen by the International Agency for Research on Cancer. Volatile organic compounds (VOCs) affect air pollution and can cause diseases. Objectives: This study aims to determine the effect on indoor air quality by measuring PM_2.5 and VOCs generated when burning scented candles and incense sticks. Methods: Scented candles and incense sticks were selected as household products to burn. As for the target sample, top-selling products (five types of scented candles, five types of incense sticks) were purchased online. The PM_2.5 concentration according to time was measured immediately next to the sample and three meters away from each other in an enclosed space using a real-time aerosol photometer. VOCs were collected as samples under the same conditions using Tenax tubes and were quantitatively analyzed by TD-GC/MS. Results: In the case of scented candles, the concentration of PM_2.5 did not increase during combustion and after being extinguished by placing a cover on the candle. For the incense sticks, the concentration of PM_2.5 averaged 1,901.27 ㎍/m³. After burning scented candles and incense sticks, some VOCs concentrations were increased such as ethyl acetate and BTEX (benzene, toluene, ethylbenzene, xylene). Conclusions: Therefore, when using scented candles, extinguishment by placing a cover on the candle can be expected to reduce PM_2.5. It is advisable to avoid using incense sticks because PM_2.5 concentration increases from the start of combustion.

• 환경위생공학
• /
• 제15권4호
• /
• pp.59-77
• /
• 2000

This study was carried out to investigate on several factors, which contaminative the water quality through the water pipe during feeding water, in 42 largescaled apart-ments(total 84 cases) and assayed the Volatile Organic Compounds(VOCs) and concen-tration of heavy metals that inflow and outflow in reservior water in Jeonnam area(Mokpo, Suncheon, Yeosu) from January 1999 to December 1999. The results obtained were summarized as follows ; 1. The quality of the water pipe composition in the order of frequency in the quality of water pipes were Copper(45.2%)> Zinc(38.9%)> Stainless steel(9.5%)> PVC(4.8%)> PM(2.4%) in observing 42 sites. All of the drain pipes were used the cast iron quality. 2. The result of certification curve from 12 items(17kind) of VOCs was $1.0-4.0{\mu{g}}/{\ell}$ range, a coefficient of correlation was shown 0.99 over. A MDL of each substance range was within $0.1-1.0{\mu{g}}/{\ell}$. 3. The result of the assay, 5 kinds(Viny chloride, Dichloromethane, Ethylbenzene, M,P-xylene, Styrene) of the VOCs of 14 kinds was not detected and the other items were detected slightly. The detection rate of one item and over in total VOCs samples, were 25.9% in inflow and 27.9% in outflow. And frequency of detect in inflow/outflow of THM(Chloroform, Bromodichloro-methane, Dibromochloromethane, Bromoform) were shown higher than 94.1%, 97.0% each stages. It comes to the conclusion that all of the samples were reason able for drinking water standards. 4. The coefficient of correlation were reasonable, it shown 0.999 over in $0.1-1.0{\mu{g}}/{\ell}$ of a measuring range conditions of 4kinds in organic substance(Zn, Cu, Fe, Mn). 5. The results were showed suitability in 78 cases(92.9%) and unsuitability in 6 cases (7.1%), in 84 cases of in organic substances. Compare to inflow stage, mean concentrations of heavy metal, were increased slightly in Zn, Cu, Fe except Mn than outflow stage. The result of the mean concentration in organic substance inflow and outflow in the apartment water tank using Pair-compared T-test, in 95% reliance index, were $0.179mg/{\ell}(0.151-0.307mg/{\ell})$ in Zinc, $0.136mg/{\ell}(0.113-0.230mg/{\ell})$ in Copper, $0.052mg/{\ell}(0.048-0.098mg/{\ell})$ in Fe, and there was a bit growing tendency but there was no differece in Mn. 6. The mean concentration of Copper which used Cu pipe as a water supply pipe in apartment were $0.216mg/{\ell}(0.161-0.338mg/{\ell})$ in case of the Zine pipe were $0.286mg/{\ell}(0.204-0.435mg/{\ell})$. It shows that the detection rate was more higher than the other material used in Cu or Zn as the water supply pipe. We supposed to Cu and Zn substance were gushing out water supply pipe.